ContextQMD
Back to Qmk Firmware

handwired/dactyl_manuform/5x7_2_6

keyboards/handwired/dactyl_manuform/5x7_2_6/readme.md

4.01.5 KB
Original Source

handwired/dactyl_manuform/5x7_2_6

A standard Dactyl Manuform keyboard with 5x7 matrix, 6 thumb cluster keys. Last row has 2 keys only. Index column has 3 rows. The outer keys are 1,5u wide. More info on https://github.com/ngrigoriev/dactyl-manuform-5x7_2_6. Based on the original set of Dactyl Manuform keyboards created and maintaied by Jack Humbert.

This keyboard can be generated using one of Dactyl Manuform generators, such as (https://dactyl.mbugert.de/manuform).

  • Keyboard Maintainer: Nikolai Grigoriev
  • Hardware Supported: Promicro
  • Hardware Availability: general DIY

Make example for this keyboard (after setting up your build environment):

make handwired/dactyl_manuform/5x7_2_6:default

Flashing example for this keyboard:

make handwired/dactyl_manuform/5x7_2_6:default:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

Bootloader

Enter the bootloader in 3 ways:

  • Bootmagic reset: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
  • Physical reset button: Briefly press the button on the back of the PCB - some may have pads you must short instead
  • Keycode in layout: Press the key mapped to QK_BOOT if it is available