dumbpad

dumbpad is a num/macro pad available in two major form factors - single- and dual-rotary encoder.

• Single-encoder PCBs are reversible - components can be soldered to either side to allow the encoder to be on either the left or right side.
• Dual-encoder PCBs come in two versions - one with the encoders in the bottom corners, the otherin the top corners

Support for dumbpad all PCB revisions can be found in this directory.

• Maintainer: imchipwood
• PCB repository: dumbpad on github
  • PCB revisions:
    • v0.x - these revisions have two LEDs for layer indication
      • 'v0x': Default setup for single rotary encoder v0.x PCBs
      • 'v0x_right': Same as v0x but with rotary encoder on right side (components on bottom of PCB)
      • 'v0x_dualencoder': Dual-encoder PCBs
    • v1.x - these revisions have three LEDs - two for layer indication, one for numlock indication
      • 'v1x': Default setup for v1.x PCBs with a single rotary encoder on the left side
      • 'v1x_right': Same as v1x but with rotary encoder on right side (components on bottom of PCB)
      • 'v1x_dualencoder': v1x PCB with two rotary encoders