ContextQMD
Back to Qmk Firmware

Harite v2 (Cirque trackpad version)

keyboards/dlip/haritev2/dual_cirque/readme.md

4.01.5 KB
Original Source

Harite v2 (Cirque trackpad version)

5 way switch directional keyboard

Make example for this keyboard (after setting up your build environment):

bash
make dlip/haritev2/dual_cirque:default

Flashing example for this keyboard:

bash
# For the left half...
make dlip/haritev2/dual_cirque:default:uf2-split-left
# or the qmk cli equivalent:
qmk flash -kb dlip/haritev2/dual_cirque --keymap default -bl uf2-split-left

# For the right half...
make dlip/haritev2/dual_cirque:default:uf2-split-right
# or the qmk cli equivalent:
qmk flash -kb dlip/haritev2/dual_cirque --keymap default -bl uf2-split-right

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

Bootloader

Enter the bootloader in 3 ways:

  • Bootmagic reset: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
  • Physical reset button: Briefly press the button on the back of the PCB - some may have pads you must short instead
  • Keycode in layout: Press the key mapped to QK_BOOT if it is available