Cornia Keyboard

A split keyboard with 3x6 column strongly staggered keys and 3 thumb keys

• Keyboard Maintainer: Vaarai
• Hardware Supported: Cornia PCB, RP2040 / 0xCB-Helios
• Hardware Availability: PCB Data

Make example for this keyboard (after setting up your build environment):

make cornia/v1:default

Flashing example for this keyboard:

make cornia/v1:default:flash

See the build environment setup and the make instructions for more information. Brand new to QMK ? Start with our Complete Newbs Guide.

Bootloader

The Cornia PCBs have a reset button on the bottom side near to the TRRS jack.

To enter in to the bootloader you can either:

• Hold reset when plugging in that half of the keyboard.
• Double press reset if firmware was already flashed and if RP2040 is used
• Press NAV+NUM+ESC if firmware was already flashed no matter what controller is used

Keymaps

Two keymaps are available for now, below are their KLE views:

• Default QWERTY layout for Cornia keyboard
• Fire layout for Cornia keyboard (Based on Fire (Oxey) layout)

OLED Display & Cirque Trackpad

The Cornia Keyboard also support OLED Display and Cirque Trackpad through I²C, an implementation is available in fire keymap.

To use it please make with the following command:

make cornia/v1:fire

And flash with:

make cornia/v1:fire:flash