B-L475E-IOT01A IoT Node (b-l475e-iot01a)

The B-L475E-IOT01A IoT Node uses the STM32L475VG SoC which is based on an Arm Cortex-M4F core. It is part of STMicroelectronics :doc:STM32 boards and more specifically the STM32L4 ultra-low power series. The STM32L4x5 chip runs at up to 80 MHz and integrates 128 KiB of SRAM and up to 1MiB of Flash. The B-L475E-IOT01A board namely features 64 Mibit QSPI Flash, BT, WiFi and RF connectivity, USART, I2C, SPI, CAN and USB OTG, as well as a variety of sensors.

Supported devices """""""""""""""""

Currently B-L475E-IOT01A machines support the following devices:

• Cortex-M4F based STM32L4x5 SoC
• STM32L4x5 EXTI (Extended interrupts and events controller)
• STM32L4x5 SYSCFG (System configuration controller)
• STM32L4x5 RCC (Reset and clock control)
• STM32L4x5 GPIOs (General-purpose I/Os)
• STM32L4x5 USARTs, UARTs and LPUART (Serial ports)
• optional 8x8 led display (based on DM163 driver)

Missing devices """""""""""""""

The B-L475E-IOT01A does not support the following devices:

• Analog to Digital Converter (ADC)
• SPI controller
• Timer controller (TIMER)

See the complete list of unimplemented peripheral devices in the STM32L4x5 module : ./hw/arm/stm32l4x5_soc.c

Boot options """"""""""""

The B-L475E-IOT01A machine can be started using the -kernel option to load a firmware. Example:

.. code-block:: bash

$ qemu-system-arm -M b-l475e-iot01a -kernel firmware.bin