Developing

This project can run fully in local dev without setting up PostgreSQL manually.

Deployment Modes

For mode definitions and intended CLI behavior, see doc/DEPLOYMENT-MODES.md.

Current implementation status:

canonical model: local_trusted and authenticated (with private/public exposure)

Prerequisites

Node.js 20+
pnpm 9+

Dependency Lockfile Policy

GitHub Actions owns pnpm-lock.yaml.

Do not commit pnpm-lock.yaml in pull requests.
Pull request CI validates dependency resolution when manifests change.
Pushes to master regenerate pnpm-lock.yaml with pnpm install --lockfile-only --no-frozen-lockfile, commit it back if needed, and then run verification with --frozen-lockfile.

Start Dev

From repo root:

pnpm install
pnpm dev

This starts:

API server: http://localhost:3100
UI: served by the API server in dev middleware mode (same origin as API)

pnpm dev runs the server in watch mode and restarts on changes from workspace packages (including adapter packages). Use pnpm dev:once to run without file watching.

pnpm dev:once auto-applies pending local migrations by default before starting the dev server.

pnpm dev and pnpm dev:once are now idempotent for the current repo and instance: if the matching Paperclip dev runner is already alive, Paperclip reports the existing process instead of starting a duplicate.

Issue execution may also use project execution workspace policies and workspace runtime services for per-project worktrees, preview servers, and managed dev commands. Configure those through the project workspace/runtime surfaces rather than starting long-running unmanaged processes when a task needs a reusable service.

Storybook

The board UI Storybook keeps stories and Storybook config under ui/storybook/ so component review files stay out of the app source routes.

pnpm storybook
pnpm build-storybook

These run the @paperclipai/ui Storybook on port 6006 and build the static output to ui/storybook-static/.

Inspect or stop the current repo's managed dev runner:

pnpm dev:list
pnpm dev:stop

pnpm dev:once now tracks backend-relevant file changes and pending migrations. When the current boot is stale, the board UI shows a Restart required banner. You can also enable guarded auto-restart in Instance Settings > Experimental, which waits for queued/running local agent runs to finish before restarting the dev server.

Tailscale/private-auth dev mode:

pnpm dev --bind lan

This runs dev as authenticated/private with a private-network bind preset.

For Tailscale-only reachability on a detected tailnet address:

pnpm dev --bind tailnet

Legacy aliases still map to the old broad private-network behavior:

pnpm dev --tailscale-auth
pnpm dev --authenticated-private

Allow additional private hostnames (for example custom Tailscale hostnames):

pnpm paperclipai allowed-hostname dotta-macbook-pro

Test Commands

Use the cheap local default unless you are specifically working on browser flows:

pnpm test

pnpm test runs the Vitest suite only. For interactive Vitest watch mode use:

pnpm test:watch

Browser suites stay separate:

pnpm test:e2e
pnpm test:release-smoke

These browser suites are intended for targeted local verification and CI, not the default agent/human test command.

For normal issue work, start with the smallest targeted check that proves the change. Reserve repo-wide typecheck/build/test runs for PR-ready handoff or changes broad enough that narrow checks do not cover the risk.

One-Command Local Run

For a first-time local install, you can bootstrap and run in one command:

pnpm paperclipai run

paperclipai run does:

auto-onboard if config is missing
paperclipai doctor with repair enabled
starts the server when checks pass

Docker Quickstart (No local Node install)

Build and run Paperclip in Docker:

docker build -t paperclip-local .
docker run --name paperclip \
  -p 3100:3100 \
  -e HOST=0.0.0.0 \
  -e PAPERCLIP_HOME=/paperclip \
  -v "$(pwd)/data/docker-paperclip:/paperclip" \
  paperclip-local

Or use Compose:

docker compose -f docker/docker-compose.quickstart.yml up --build

See doc/DOCKER.md for API key wiring (OPENAI_API_KEY / ANTHROPIC_API_KEY) and persistence details.

Docker For Untrusted PR Review

For a separate review-oriented container that keeps codex/claude login state in Docker volumes and checks out PRs into an isolated scratch workspace, see doc/UNTRUSTED-PR-REVIEW.md.

Database in Dev (Auto-Handled)

For local development, leave DATABASE_URL unset. The server will automatically use embedded PostgreSQL and persist data at:

~/.paperclip/instances/default/db

Override home and instance:

PAPERCLIP_HOME=/custom/path PAPERCLIP_INSTANCE_ID=dev pnpm paperclipai run

No Docker or external database is required for this mode.

Storage in Dev (Auto-Handled)

For local development, the default storage provider is local_disk, which persists uploaded images/attachments at:

~/.paperclip/instances/default/data/storage

Configure storage provider/settings:

pnpm paperclipai configure --section storage

Default Agent Workspaces

When a local agent run has no resolved project/session workspace, Paperclip falls back to an agent home workspace under the instance root:

~/.paperclip/instances/default/workspaces/<agent-id>

This path honors PAPERCLIP_HOME and PAPERCLIP_INSTANCE_ID in non-default setups.

For codex_local, Paperclip also manages a per-company Codex home under the instance root and seeds it from the shared Codex login/config home ($CODEX_HOME or ~/.codex):

~/.paperclip/instances/default/companies/<company-id>/codex-home

If the codex CLI is not installed or not on PATH, codex_local agent runs fail at execution time with a clear adapter error. Quota polling uses a short-lived codex app-server subprocess: when codex cannot be spawned, that provider reports ok: false in aggregated quota results and the API server keeps running (it must not exit on a missing binary).

Local adapters require their corresponding CLI/session setup on the machine running Paperclip. External adapters are installed through the adapter/plugin flow and should not require hardcoded imports in server/ or ui/.

Worktree-local Instances

When developing from multiple git worktrees, do not point two Paperclip servers at the same embedded PostgreSQL data directory.

Instead, create a repo-local Paperclip config plus an isolated instance for the worktree:

paperclipai worktree init
# or create the git worktree and initialize it in one step:
pnpm paperclipai worktree:make paperclip-pr-432

This command:

writes repo-local files at .paperclip/config.json and .paperclip/.env
creates an isolated instance under ~/.paperclip-worktrees/instances/<worktree-id>/
when run inside a linked git worktree, mirrors the effective git hooks into that worktree's private git dir
picks a free app port and embedded PostgreSQL port
by default seeds the isolated DB in minimal mode from the current effective Paperclip instance/config (repo-local worktree config when present, otherwise the default instance) via a logical SQL snapshot

Seed modes:

minimal keeps core app state like companies, projects, issues, comments, approvals, and auth state, preserves schema for all tables, but omits row data from heavy operational history such as heartbeat runs, wake requests, activity logs, runtime services, and agent session state
full makes a full logical clone of the source instance
--no-seed creates an empty isolated instance

Seeded worktree instances quarantine copied live execution by default for both minimal and full seeds. During restore, Paperclip disables copied agent timer heartbeats, resets copied running agents to idle, blocks and unassigns copied agent-owned in_progress issues, and unassigns copied agent-owned todo/in_review issues. This keeps a freshly booted worktree from starting agents for work already owned by the source instance. Pass --preserve-live-work only when you intentionally want the isolated worktree to resume copied assignments.

After worktree init, both the server and the CLI auto-load the repo-local .paperclip/.env when run inside that worktree, so normal commands like pnpm dev, paperclipai doctor, and paperclipai db:backup stay scoped to the worktree instance.

pnpm dev now fails fast in a linked git worktree when .paperclip/.env is missing, instead of silently booting against the default instance/port. If that happens, run paperclipai worktree init in the worktree first.

Provisioned git worktrees also pause seeded routines that still have enabled schedule triggers in the isolated worktree database by default. This prevents copied daily/cron routines from firing unexpectedly inside the new workspace instance during development without disabling webhook/API-only routines.

That repo-local env also sets:

PAPERCLIP_IN_WORKTREE=true
PAPERCLIP_WORKTREE_NAME=<worktree-name>
PAPERCLIP_WORKTREE_COLOR=<hex-color>

The server/UI use those values for worktree-specific branding such as the top banner and dynamically colored favicon. Authenticated worktree servers also use the PAPERCLIP_INSTANCE_ID value to scope Better Auth cookie names. Browser cookies are shared by host rather than port, so this prevents logging into one 127.0.0.1:<port> worktree from replacing another worktree server's session cookie.

Print shell exports explicitly when needed:

paperclipai worktree env
# or:
eval "$(paperclipai worktree env)"

Worktree CLI Reference

pnpm paperclipai worktree init [options] — Create repo-local config/env and an isolated instance for the current worktree.

Option	Description
`--name <name>`	Display name used to derive the instance id
`--instance <id>`	Explicit isolated instance id
`--home <path>`	Home root for worktree instances (default: `~/.paperclip-worktrees`)
`--from-config <path>`	Source config.json to seed from
`--from-data-dir <path>`	Source PAPERCLIP_HOME used when deriving the source config
`--from-instance <id>`	Source instance id (default: `default`)
`--server-port <port>`	Preferred server port
`--db-port <port>`	Preferred embedded Postgres port
`--seed-mode <mode>`	Seed profile: `minimal` or `full` (default: `minimal`)
`--no-seed`	Skip database seeding from the source instance
`--force`	Replace existing repo-local config and isolated instance data

Examples:

paperclipai worktree init --no-seed
paperclipai worktree init --seed-mode full
paperclipai worktree init --from-instance default
paperclipai worktree init --from-data-dir ~/.paperclip
paperclipai worktree init --force

Repair an already-created repo-managed worktree and reseed its isolated instance from the main default install:

cd /path/to/paperclip/.paperclip/worktrees/PAP-884-ai-commits-component
pnpm paperclipai worktree init --force --seed-mode minimal \
  --name PAP-884-ai-commits-component \
  --from-config ~/.paperclip/instances/default/config.json

That rewrites the worktree-local .paperclip/config.json + .paperclip/.env, recreates the isolated instance under ~/.paperclip-worktrees/instances/<worktree-id>/, and preserves the git worktree contents themselves.

For an already-created worktree where you want the CLI to decide whether to rebuild missing worktree metadata or just reseed the isolated DB, use worktree repair.

pnpm paperclipai worktree repair [options] — Repair the current linked worktree by default, or create/repair a named linked worktree under .paperclip/worktrees/ when --branch is provided. The command never targets the primary checkout unless you explicitly pass --branch.

Option	Description
`--branch <name>`	Existing branch/worktree selector to repair, or a branch name to create under `.paperclip/worktrees`
`--home <path>`	Home root for worktree instances (default: `~/.paperclip-worktrees`)
`--from-config <path>`	Source config.json to seed from
`--from-data-dir <path>`	Source `PAPERCLIP_HOME` used when deriving the source config
`--from-instance <id>`	Source instance id when deriving the source config (default: `default`)
`--seed-mode <mode>`	Seed profile: `minimal` or `full` (default: `minimal`)
`--no-seed`	Repair metadata only when bootstrapping a missing worktree config
`--allow-live-target`	Override the guard that requires the target worktree DB to be stopped first

Examples:

# From inside a linked worktree, rebuild missing .paperclip metadata and reseed it from the default instance.
cd /path/to/paperclip/.paperclip/worktrees/PAP-1132-assistant-ui-pap-1131-make-issues-comments-be-like-a-chat
pnpm paperclipai worktree repair

# From the primary checkout, create or repair a linked worktree for a branch under .paperclip/worktrees/.
cd /path/to/paperclip
pnpm paperclipai worktree repair --branch PAP-1132-assistant-ui-pap-1131-make-issues-comments-be-like-a-chat

For an already-created worktree where you want to keep the existing repo-local config/env and only overwrite the isolated database, use worktree reseed instead. Stop the target worktree's Paperclip server first so the command can replace the DB safely.

pnpm paperclipai worktree reseed [options] — Re-seed an existing worktree-local instance from another Paperclip instance or worktree while preserving the target worktree's current config, ports, and instance identity.

Option	Description
`--from <worktree>`	Source worktree path, directory name, branch name, or `current`
`--to <worktree>`	Target worktree path, directory name, branch name, or `current` (defaults to `current`)
`--from-config <path>`	Source config.json to seed from
`--from-data-dir <path>`	Source `PAPERCLIP_HOME` used when deriving the source config
`--from-instance <id>`	Source instance id when deriving the source config
`--seed-mode <mode>`	Seed profile: `minimal` or `full` (default: `full`)
`--yes`	Skip the destructive confirmation prompt
`--allow-live-target`	Override the guard that requires the target worktree DB to be stopped first

Examples:

# From the main repo, reseed a worktree from the current default/master instance.
cd /path/to/paperclip
pnpm paperclipai worktree reseed \
  --from current \
  --to PAP-1132-assistant-ui-pap-1131-make-issues-comments-be-like-a-chat \
  --seed-mode full \
  --yes

# From inside a worktree, reseed it from the default instance config.
cd /path/to/paperclip/.paperclip/worktrees/PAP-1132-assistant-ui-pap-1131-make-issues-comments-be-like-a-chat
pnpm paperclipai worktree reseed \
  --from-instance default \
  --seed-mode full

pnpm paperclipai worktree:make <name> [options] — Create ~/NAME as a git worktree, then initialize an isolated Paperclip instance inside it. This combines git worktree add with worktree init in a single step.

Option	Description
`--start-point <ref>`	Remote ref to base the new branch on (e.g. `origin/main`)
`--instance <id>`	Explicit isolated instance id
`--home <path>`	Home root for worktree instances (default: `~/.paperclip-worktrees`)
`--from-config <path>`	Source config.json to seed from
`--from-data-dir <path>`	Source PAPERCLIP_HOME used when deriving the source config
`--from-instance <id>`	Source instance id (default: `default`)
`--server-port <port>`	Preferred server port
`--db-port <port>`	Preferred embedded Postgres port
`--seed-mode <mode>`	Seed profile: `minimal` or `full` (default: `minimal`)
`--no-seed`	Skip database seeding from the source instance
`--force`	Replace existing repo-local config and isolated instance data

Examples:

pnpm paperclipai worktree:make paperclip-pr-432
pnpm paperclipai worktree:make my-feature --start-point origin/main
pnpm paperclipai worktree:make experiment --no-seed

pnpm paperclipai worktree env [options] — Print shell exports for the current worktree-local Paperclip instance.

Option	Description
`-c, --config <path>`	Path to config file
`--json`	Print JSON instead of shell exports

Examples:

pnpm paperclipai worktree env
pnpm paperclipai worktree env --json
eval "$(pnpm paperclipai worktree env)"

For project execution worktrees, Paperclip can also run a project-defined provision command after it creates or reuses an isolated git worktree. Configure this on the project's execution workspace policy (workspaceStrategy.provisionCommand). The command runs inside the derived worktree and receives PAPERCLIP_WORKSPACE_*, PAPERCLIP_PROJECT_ID, PAPERCLIP_AGENT_ID, and PAPERCLIP_ISSUE_* environment variables so each repo can bootstrap itself however it wants.

Quick Health Checks

In another terminal:

curl http://localhost:3100/api/health
curl http://localhost:3100/api/companies

Expected:

/api/health returns {"status":"ok"}
/api/companies returns a JSON array

Reset Local Dev Database

To wipe local dev data and start fresh:

rm -rf ~/.paperclip/instances/default/db
pnpm dev

Optional: Use External Postgres

If you set DATABASE_URL, the server will use that instead of embedded PostgreSQL.

Automatic DB Backups

Paperclip can run automatic DB backups on a timer. Defaults:

enabled
every 60 minutes
retain 30 days
backup dir: ~/.paperclip/instances/default/data/backups

Configure these in:

pnpm paperclipai configure --section database

Run a one-off backup manually:

pnpm paperclipai db:backup
# or:
pnpm db:backup

Environment overrides:

PAPERCLIP_DB_BACKUP_ENABLED=true|false
PAPERCLIP_DB_BACKUP_INTERVAL_MINUTES=<minutes>
PAPERCLIP_DB_BACKUP_RETENTION_DAYS=<days>
PAPERCLIP_DB_BACKUP_DIR=/absolute/or/~/path

Secrets in Dev

Agent env vars now support secret references. By default, secret values are stored with local encryption and only secret refs are persisted in agent config.

Default local key path: ~/.paperclip/instances/default/secrets/master.key
Override key material directly: PAPERCLIP_SECRETS_MASTER_KEY
Override key file path: PAPERCLIP_SECRETS_MASTER_KEY_FILE

Strict mode (recommended outside local trusted machines):

PAPERCLIP_SECRETS_STRICT_MODE=true

When strict mode is enabled, sensitive env keys (for example *_API_KEY, *_TOKEN, *_SECRET) must use secret references instead of inline plain values.

CLI configuration support:

pnpm paperclipai onboard writes a default secrets config section (local_encrypted, strict mode off, key file path set) and creates a local key file when needed.
pnpm paperclipai configure --section secrets lets you update provider/strict mode/key path and creates the local key file when needed.
pnpm paperclipai doctor validates secrets adapter configuration and can create a missing local key file with --repair.

Migration helper for existing inline env secrets:

pnpm secrets:migrate-inline-env         # dry run
pnpm secrets:migrate-inline-env --apply # apply migration

Company Deletion Toggle

Company deletion is intended as a dev/debug capability and can be disabled at runtime:

PAPERCLIP_ENABLE_COMPANY_DELETION=false

Default behavior:

local_trusted: enabled
authenticated: disabled

CLI Client Operations

Paperclip CLI now includes client-side control-plane commands in addition to setup commands.

Quick examples:

pnpm paperclipai issue list --company-id <company-id>
pnpm paperclipai issue create --company-id <company-id> --title "Investigate checkout conflict"
pnpm paperclipai issue update <issue-id> --status in_progress --comment "Started triage"

Set defaults once with context profiles:

pnpm paperclipai context set --api-base http://localhost:3100 --company-id <company-id>

Then run commands without repeating flags:

pnpm paperclipai issue list
pnpm paperclipai dashboard get

See full command reference in doc/CLI.md.

OpenClaw Invite Onboarding Endpoints

Agent-oriented invite onboarding now exposes machine-readable API docs:

GET /api/invites/:token returns invite summary plus onboarding and skills index links.
GET /api/invites/:token/onboarding returns onboarding manifest details (registration endpoint, claim endpoint template, skill install hints).
GET /api/invites/:token/onboarding.txt returns a plain-text onboarding doc intended for both human operators and agents (llm.txt-style handoff), including optional inviter message and suggested network host candidates.
GET /api/skills/index lists available skill documents.
GET /api/skills/paperclip returns the Paperclip heartbeat skill markdown.

OpenClaw Join Smoke Test

Run the end-to-end OpenClaw join smoke harness:

pnpm smoke:openclaw-join

What it validates:

invite creation for agent-only join
agent join request using adapterType=openclaw
board approval + one-time API key claim semantics
callback delivery on wakeup to a dockerized OpenClaw-style webhook receiver

Required permissions:

This script performs board-governed actions (create invite, approve join, wakeup another agent).
In authenticated mode, run with board auth via PAPERCLIP_AUTH_HEADER or PAPERCLIP_COOKIE.

Optional auth flags (for authenticated mode):

PAPERCLIP_AUTH_HEADER (for example Bearer ...)
PAPERCLIP_COOKIE (session cookie header value)

OpenClaw Docker UI One-Command Script

To boot OpenClaw in Docker and print a host-browser dashboard URL in one command:

pnpm smoke:openclaw-docker-ui

This script lives at scripts/smoke/openclaw-docker-ui.sh and automates clone/build/config/start for Compose-based local OpenClaw UI testing.

Pairing behavior for this smoke script:

default OPENCLAW_DISABLE_DEVICE_AUTH=1 (no Control UI pairing prompt for local smoke; no extra pairing env vars required)
set OPENCLAW_DISABLE_DEVICE_AUTH=0 to require standard device pairing

Model behavior for this smoke script:

defaults to OpenAI models (openai/gpt-5.2 + OpenAI fallback) so it does not require Anthropic auth by default

State behavior for this smoke script:

defaults to isolated config dir ~/.openclaw-paperclip-smoke
resets smoke agent state each run by default (OPENCLAW_RESET_STATE=1) to avoid stale provider/auth drift

Networking behavior for this smoke script:

auto-detects and prints a Paperclip host URL reachable from inside OpenClaw Docker
default container-side host alias is host.docker.internal (override with PAPERCLIP_HOST_FROM_CONTAINER / PAPERCLIP_HOST_PORT)
if Paperclip rejects container hostnames in authenticated/private mode, allow host.docker.internal via pnpm paperclipai allowed-hostname host.docker.internal and restart Paperclip