CLI Integrations

OmniRoute ships a family of setup-* commands that configure a coding CLI (Codex, Claude Code, OpenCode, Cline, …) to use OmniRoute as its backend — so the tool talks to one endpoint and OmniRoute routes to the right provider with auto-fallback. Each command reads the live model catalog from a running OmniRoute (local or remote) and writes the tool's own config file on your machine. The API key is referenced by an environment variable wherever the tool supports it. Commands that persist a tool-local environment file are noted below.

There is also a generic launcher — omniroute run <target> — that spawns claude, codex, aider, goose, opencode, qwen or gemini with the right env injected, without writing any config at all. Targets and their aliases come from the canonical manifest bin/cli/cli-manifest.mjs (claude-code|cc|anthropic, codex-cli|openai-codex|openai, goose-cli, open-code, qwen-code, gemini-cli), and omniroute completion offers the same manifest-derived target words. The legacy per-tool launchers — omniroute launch (Claude Code) and omniroute launch-codex (Codex) — remain available.

Provider onboarding is available from the same local/remote context. The API-first commands below keep management authentication separate from provider credentials and never print a credential in structured output:

omniroute providers add glm --credential-env GLM_API_KEY --name work
omniroute providers import ./providers.json --dry-run --json
omniroute providers auth openai
omniroute providers edit <connection-id> --default-model glm/glm-5.2
omniroute providers remove <connection-id> --yes

For scripts, prefer --credential-stdin or --credential-env; --credential is retained for controlled local use. providers remove requires --yes on a non-interactive terminal, and all five commands honor the active context or the global --base-url/--api-key options.

For the one-time, hand-written base setup of the two richest integrations, see the per-tool deep dives:

• Claude Code configuration
• Codex CLI configuration
• Remote Mode — drive a remote OmniRoute (VPS / Tailnet) from your laptop
• VS Code Copilot Chat — the OmniCopilot extension; it can also run these setup-* commands for you from inside the editor

Master table

Every command honours the active context (set with omniroute connect, see Remote Mode) or explicit --remote <url> --api-key <key> flags. "Local vs remote" below means: with no flags it targets http://localhost:20128; with --remote (or an active remote context) it fetches the catalog from that server and writes the config locally.

Notes on flags (verified in the command source):

• --remote <url> — fetch the catalog from a remote OmniRoute (overrides --port and the active context). --api-key <key> supplies the credential for that server (defaults to the OMNIROUTE_API_KEY env var, or the active context's token).
• --only <patterns> — comma-separated substrings; keep only model IDs that match (e.g. --only glm,kimi). Available on setup-codex, setup-claude, setup-opencode, setup-continue, setup-cursor, setup-crush.
• --dry-run — print exactly what would be written without touching the filesystem. Available on every setup-* command except setup-cursor (which never writes a file).
• --model <id> — required (or picked interactively) for the tools that have no model auto-discovery: Cline, Kilo, Roo, Goose, Qwen, Aider. Those tools also accept --yes for non-interactive runs (which then requires --model). setup-opencode takes --model to set the default top-level model.
• --model <id> on omniroute run follows the manifest's per-target wiring (bin/cli/cli-manifest.mjs): aider receives --model openai/<id> and opencode --model omniroute/<id> (the prefix is added only when the id does not already carry it); qwen and gemini receive the id verbatim; claude gets it via ANTHROPIC_MODEL, goose via GOOSE_MODEL, and codex via -c model_providers.omniroute.* args. Qwen is the only run target that hard-requires --model — omniroute run qwen without it exits 2 with an explicit error.
• --port <port> — local OmniRoute port (default 20128, ignored when --remote is set). Present on all setup-* and both launchers.
• omniroute run exit codes: the child CLI's own exit code is propagated verbatim; 2 = invalid arguments (unsupported target, missing required --model, container guard); 127 = the target binary is not in PATH; 130/143/129 when the launch is ended by SIGINT/SIGTERM/SIGHUP; 1 = other runtime launch failure.
• The two launchers (launch, launch-codex) accept --profile <name> to select a profile written by setup-claude / setup-codex, plus pass-through args for the underlying claude / codex binary.

The interactive picker is also shared by the setup recipes:

# Pick from the active local or remote model catalog and configure the target.
omniroute configure claude
omniroute configure opencode --provider glm
omniroute configure qwen --model qwen/qwen3.8-max-preview --yes

configure currently delegates to the tested recipes for codex, claude, opencode, qwen, aider, goose, cline, continue, and kilo. IDE-only, MITM, and guide-only catalog entries remain explicit setup-*/manual flows and are not presented as launchable targets.

setup-opencode is the lightweight openai-compatible OpenCode integration. There is also a richer plugin integration — omniroute setup opencode — which installs @omniroute/opencode-plugin. They are different commands; the table above documents setup-opencode.

Local usage

With OmniRoute running on localhost:20128, just run the setup command for your tool. The catalog is fetched from the local server.

# Codex: write a profile per matched model into ~/.codex/
omniroute setup-codex
codex --profile glm52            # use a generated profile

# Claude Code: write per-model profiles, then launch one
omniroute setup-claude
omniroute launch --profile glm52

# OpenCode: write the openai-compatible provider with all catalog models
omniroute setup-opencode
export OMNIROUTE_API_KEY=sk-...  # referenced via {env:OMNIROUTE_API_KEY}, never on disk
opencode -m omniroute/glm/glm-5.2 "..."

# Tools without auto-discovery need an explicit model:
omniroute setup-aider --model glm/glm-5.2
omniroute setup-qwen --model qwen/qwen3.8-max-preview

# Preview without writing anything:
omniroute setup-continue --dry-run

Launch without writing any config at all (env-injection only):

omniroute launch                 # Claude Code → local OmniRoute
omniroute launch-codex           # Codex CLI → local OmniRoute
omniroute launch-codex --profile glm52
omniroute run claude --model openai/gpt-5.4
omniroute run codex --model openai/gpt-5.4 --dry-run --json
omniroute run aider --model glm/glm-5.2 -- --message "reply OK"
omniroute run goose --model glm/glm-5.2
omniroute run opencode --model glm/glm-5.2 -- run "reply OK"
omniroute run qwen --model glm/glm-5.2 -- -p "reply OK"
omniroute run gemini --model glm/glm-5.2 -- --skip-trust -p "reply OK"

# Explicit command path: pass through whatever comes after --
omniroute run claude -- --print-system-prompt "review this diff"

Remote usage

Point any setup command at a remote OmniRoute with --remote + --api-key. The catalog is fetched from the remote; the config is written on your local machine.

# OpenCode against a remote VPS, keep only glm/kimi models
omniroute setup-opencode --remote http://192.168.0.15:20128 --api-key oma_live_xxx \
  --only glm,kimi
opencode -m omniroute/glm/glm-5.2 "..."   # export OMNIROUTE_API_KEY first

# Codex profiles from a remote catalog
omniroute setup-codex --remote http://192.168.0.15:20128 --api-key oma_live_xxx

# Launch a CLI straight against the remote
omniroute launch       --remote http://192.168.0.15:20128 --api-key oma_live_xxx
omniroute launch-codex --remote http://192.168.0.15:20128 --api-key oma_live_xxx

Instead of passing --remote/--api-key every time, log in once and let the active context supply them automatically:

omniroute connect 192.168.0.15        # mints a scoped token, stores the context
omniroute setup-codex                 # ← now uses the remote catalog
omniroute setup-opencode              # ← same
omniroute launch                      # ← Claude Code against the remote

See Remote Mode for contexts, scopes, and token management.

Base URL conventions (which tools want /v1)

OmniRoute exposes the OpenAI surface at /v1, the Anthropic surface at the root, and a native Gemini surface at /v1beta. Each integration is wired to the form its tool expects (verified in the command source):

Keeping native deps on update: --include=optional

When you update with omniroute update (after confirming, or with --apply), OmniRoute runs the install with --include=optional baked in:

npm install -g omniroute@latest --include=optional

This is not a flag you pass to omniroute update — it is always applied by the updater. It guarantees the optionalDependencies (better-sqlite3, keytar, tls-client, the LLMLingua SLM stack) survive the update even if your npm config has omit=optional set, which would otherwise silently drop the native SQLite driver and OS-keyring binding. To preview the exact command without applying:

omniroute update --dry-run
# [DRY RUN] Would run: npm install -g omniroute@latest --include=optional

Other omniroute update flags (verified in source): --check (exit 1 if outdated), --apply (install without prompting), --changelog, --no-backup, --yes.

Google Gemini CLI via omniroute run gemini

Contract verified against @google/gemini-cli 0.50.0: the CLI honors GOOGLE_GEMINI_BASE_URL and issues POST /v1beta/models/<model>:generateContent (and :streamGenerateContent?alt=sse) against it — exactly OmniRoute's native Gemini surface (/v1beta). omniroute run gemini wires that automatically:

• GOOGLE_GEMINI_BASE_URL → the active OmniRoute base URL (root, no /v1);
• GEMINI_API_KEY → the resolved OmniRoute credential (option/env/context);
• a temporary isolated GEMINI_CLI_HOME whose .gemini/settings.json selects gemini-api-key auth, so a stored Google OAuth session (Code Assist) never overrides the OmniRoute-directed launch — removed after exit;
• env hygiene: the child env is scrubbed of GOOGLE_API_KEY, GOOGLE_GENAI_USE_VERTEXAI and GOOGLE_GENAI_USE_GCA (which would redirect auth to Vertex/Code Assist), and GEMINI_DEFAULT_AUTH_TYPE=gemini-api-key is set as a belt-and-suspenders fallback — the other run targets get the same treatment for their own conflicting variables;
• --model <id> injection from --provider/--model.

omniroute run gemini --model glm/glm-5.2 -- --skip-trust -p "hello"

Gemini's workspace-trust guard still applies in headless mode — pass --skip-trust (or trust the directory interactively) yourself; the launcher deliberately does not bypass it. This launcher is distinct from the ACP registration (src/lib/acp/registry.ts, gemini --acp), which remains the agent-protocol integration for /dashboard/acp-agents.

Real smoke sweep (opt-in)

Deterministic launch-plan regression runs in CI (tests/unit/cli/run-command.test.ts, tests/unit/cli/run-execution.test.ts). To validate the REAL binaries against a REAL OmniRoute server, an opt-in harness exists at tests/integration/upstream-cli-smoke.int.test.ts. It never runs automatically (every sub-test skips unless RUN_CLI_SMOKE=1), passes the credential by env-var NAME (never by value), redacts key-shaped strings from any recorded output, skips targets whose binary is not installed, and classifies failures as auth / upstream / config instead of a bare boolean:

RUN_CLI_SMOKE=1 \
OMNIROUTE_SMOKE_BASE_URL="http://localhost:20128" \
OMNIROUTE_SMOKE_MODEL="<provider/model>" \
OMNIROUTE_SMOKE_API_KEY_ENV="OMNIROUTE_API_KEY" \
node --import tsx/esm --test tests/integration/upstream-cli-smoke.int.test.ts

Optional: OMNIROUTE_SMOKE_TARGETS="codex,opencode,qwen" restricts the sweep; OMNIROUTE_SMOKE_TIMEOUT_MS overrides the 120s per-target timeout.

See also

• Claude Code configuration — the deeper Claude Code guide
• Codex CLI configuration — the one-time [model_providers.omniroute] base setup
• Remote Mode — contexts, scoped access tokens, driving a remote server
• CLI Tools reference — the full catalog of supported tools + dashboard pages
• Setup Guide — install methods and first-run onboarding