ContextQMD
Back to Numpy

Changelog

doc/changelog/1.12.0-changelog.rst

2.5.0.dev045.5 KB
Original Source

========= Changelog

Contributors

A total of 139 people contributed to this release. People with a "+" by their names contributed a patch for the first time.

  • Aditya Panchal +
  • Ales Erjavec +
  • Alex Griffing
  • Alexandr Shadchin +
  • Alistair Muldal
  • Allan Haldane
  • Amit Aronovitch +
  • Andrei Kucharavy +
  • Antony Lee
  • Antti Kaihola +
  • Arne de Laat +
  • Auke Wiggers +
  • AustereCuriosity +
  • Badhri Narayanan Krishnakumar +
  • Ben North +
  • Ben Rowland +
  • Bertrand Lefebvre
  • Boxiang Sun
  • CJ Carey
  • Charles Harris
  • Christoph Gohlke
  • Daniel Ching +
  • Daniel Rasmussen +
  • Daniel Smith +
  • David Schaich +
  • Denis Alevi +
  • Devin Jeanpierre +
  • Dmitry Odzerikho
  • Dongjoon Hyun +
  • Edward Richards +
  • Ekaterina Tuzova +
  • Emilien Kofman +
  • Endolith
  • Eren Sezener +
  • Eric Moore
  • Eric Quintero +
  • Eric Wieser +
  • Erik M. Bray
  • Frederic Bastien
  • Friedrich Dunne +
  • Gerrit Holl
  • Golnaz Irannejad +
  • Graham Markall +
  • Greg Knoll +
  • Greg Young
  • Gustavo Serra Scalet +
  • Ines Wichert +
  • Irvin Probst +
  • Jaime Fernandez
  • James Sanders +
  • Jan David Mol +
  • Jan Schlüter
  • Jeremy Tuloup +
  • John Kirkham
  • John Zwinck +
  • Jonathan Helmus
  • Joseph Fox-Rabinovitz
  • Josh Wilson +
  • Joshua Warner +
  • Julian Taylor
  • Ka Wo Chen +
  • Kamil Rytarowski +
  • Kelsey Jordahl +
  • Kevin Deldycke +
  • Khaled Ben Abdallah Okuda +
  • Lion Krischer +
  • Loïc Estève +
  • Luca Mussi +
  • Mads Ohm Larsen +
  • Manoj Kumar +
  • Mario Emmenlauer +
  • Marshall Bockrath-Vandegrift +
  • Marshall Ward +
  • Marten van Kerkwijk
  • Mathieu Lamarre +
  • Matthew Brett
  • Matthew Harrigan +
  • Matthias Geier
  • Matti Picus +
  • Meet Udeshi +
  • Michael Felt +
  • Michael Goerz +
  • Michael Martin +
  • Michael Seifert +
  • Mike Nolta +
  • Nathaniel Beaver +
  • Nathaniel J. Smith
  • Naveen Arunachalam +
  • Nick Papior
  • Nikola Forró +
  • Oleksandr Pavlyk +
  • Olivier Grisel
  • Oren Amsalem +
  • Pauli Virtanen
  • Pavel Potocek +
  • Pedro Lacerda +
  • Peter Creasey +
  • Phil Elson +
  • Philip Gura +
  • Phillip J. Wolfram +
  • Pierre de Buyl +
  • Raghav RV +
  • Ralf Gommers
  • Ray Donnelly +
  • Rehas Sachdeva
  • Rob Malouf +
  • Robert Kern
  • Samuel St-Jean
  • Sanchez Gonzalez Alvaro +
  • Saurabh Mehta +
  • Scott Sanderson +
  • Sebastian Berg
  • Shayan Pooya +
  • Shota Kawabuchi +
  • Simon Conseil
  • Simon Gibbons
  • Sorin Sbarnea +
  • Stefan van der Walt
  • Stephan Hoyer
  • Steven J Kern +
  • Stuart Archibald
  • Tadeu Manoel +
  • Takuya Akiba +
  • Thomas A Caswell
  • Tom Bird +
  • Tony Kelman +
  • Toshihiro Kamishima +
  • Valentin Valls +
  • Varun Nayyar
  • Victor Stinner +
  • Warren Weckesser
  • Wendell Smith
  • Wojtek Ruszczewski +
  • Xavier Abellan Ecija +
  • Yaroslav Halchenko
  • Yash Shah +
  • Yinon Ehrlich +
  • Yu Feng +
  • nevimov +

Pull requests merged

A total of 418 pull requests were merged for this release.

  • #4073 <https://github.com/numpy/numpy/pull/4073>__: BUG: change real output checking to test if all imaginary parts...
  • #4619 <https://github.com/numpy/numpy/pull/4619>__: BUG : np.sum silently drops keepdims for sub-classes of ndarray
  • #5488 <https://github.com/numpy/numpy/pull/5488>__: ENH: add contract: optimizing numpy's einsum expression
  • #5706 <https://github.com/numpy/numpy/pull/5706>__: ENH: make some masked array methods behave more like ndarray...
  • #5822 <https://github.com/numpy/numpy/pull/5822>__: Allow many distributions to have a scale of 0.
  • #6054 <https://github.com/numpy/numpy/pull/6054>__: WIP: MAINT: Add deprecation warning to views of multi-field indexes
  • #6298 <https://github.com/numpy/numpy/pull/6298>__: Check lower base limit in base_repr.
  • #6430 <https://github.com/numpy/numpy/pull/6430>__: Fix issues with zero-width string fields
  • #6656 <https://github.com/numpy/numpy/pull/6656>__: ENH: usecols now accepts an int when only one column has to be...
  • #6660 <https://github.com/numpy/numpy/pull/6660>__: Added pathlib support for several functions
  • #6872 <https://github.com/numpy/numpy/pull/6872>__: ENH: linear interpolation of complex values in lib.interp
  • #6997 <https://github.com/numpy/numpy/pull/6997>__: MAINT: Simplify mtrand.pyx helpers
  • #7003 <https://github.com/numpy/numpy/pull/7003>__: BUG: Fix string copying for np.place
  • #7026 <https://github.com/numpy/numpy/pull/7026>__: DOC: Clarify behavior in np.random.uniform
  • #7055 <https://github.com/numpy/numpy/pull/7055>__: BUG: One Element Array Inputs Return Scalars in np.random
  • #7063 <https://github.com/numpy/numpy/pull/7063>__: REL: Update master branch after 1.11.x branch has been made.
  • #7073 <https://github.com/numpy/numpy/pull/7073>__: DOC: Update the 1.11.0 release notes.
  • #7076 <https://github.com/numpy/numpy/pull/7076>__: MAINT: Update the git .mailmap file.
  • #7082 <https://github.com/numpy/numpy/pull/7082>__: TST, DOC: Added Broadcasting Tests in test_random.py
  • #7087 <https://github.com/numpy/numpy/pull/7087>__: BLD: fix compilation on non glibc-Linuxes
  • #7088 <https://github.com/numpy/numpy/pull/7088>__: BUG: Have norm cast non-floating point arrays to 64-bit float...
  • #7090 <https://github.com/numpy/numpy/pull/7090>__: ENH: Added 'doane' and 'sqrt' estimators to np.histogram in numpy.function_base
  • #7091 <https://github.com/numpy/numpy/pull/7091>__: Revert "BLD: fix compilation on non glibc-Linuxes"
  • #7092 <https://github.com/numpy/numpy/pull/7092>__: BLD: fix compilation on non glibc-Linuxes
  • #7099 <https://github.com/numpy/numpy/pull/7099>__: TST: Suppressed warnings
  • #7102 <https://github.com/numpy/numpy/pull/7102>__: MAINT: Removed conditionals that are always false in datetime_strings.c
  • #7105 <https://github.com/numpy/numpy/pull/7105>__: DEP: Deprecate as_strided returning a writable array as default
  • #7109 <https://github.com/numpy/numpy/pull/7109>__: DOC: update Python versions requirements in the install docs
  • #7114 <https://github.com/numpy/numpy/pull/7114>__: MAINT: Fix typos in docs
  • #7116 <https://github.com/numpy/numpy/pull/7116>__: TST: Fixed f2py test for win32 virtualenv
  • #7118 <https://github.com/numpy/numpy/pull/7118>__: TST: Fixed f2py test for non-versioned python executables
  • #7119 <https://github.com/numpy/numpy/pull/7119>__: BUG: Fixed mingw.lib error
  • #7125 <https://github.com/numpy/numpy/pull/7125>__: DOC: Updated documentation wording and examples for np.percentile.
  • #7129 <https://github.com/numpy/numpy/pull/7129>__: BUG: Fixed 'midpoint' interpolation of np.percentile in odd cases.
  • #7131 <https://github.com/numpy/numpy/pull/7131>__: Fix setuptools sdist
  • #7133 <https://github.com/numpy/numpy/pull/7133>__: ENH: savez: temporary file alongside with target file and improve...
  • #7134 <https://github.com/numpy/numpy/pull/7134>__: MAINT: Fix some typos in a code string and comments
  • #7141 <https://github.com/numpy/numpy/pull/7141>__: BUG: Unpickled void scalars should be contiguous
  • #7144 <https://github.com/numpy/numpy/pull/7144>__: MAINT: Change call_fortran into callfortran in comments.
  • #7145 <https://github.com/numpy/numpy/pull/7145>__: BUG: Fixed regressions in np.piecewise in ref to #5737 and #5729.
  • #7147 <https://github.com/numpy/numpy/pull/7147>__: Temporarily disable numpy_ufunc
  • #7148 <https://github.com/numpy/numpy/pull/7148>__: ENH,TST: Bump stacklevel and add tests for warnings
  • #7149 <https://github.com/numpy/numpy/pull/7149>__: TST: Add missing suffix to temppath manager
  • #7152 <https://github.com/numpy/numpy/pull/7152>__: BUG: mode kwargs passed as unicode to np.pad raises an exception
  • #7156 <https://github.com/numpy/numpy/pull/7156>__: BUG: Reascertain that linspace respects ndarray subclasses in...
  • #7167 <https://github.com/numpy/numpy/pull/7167>__: DOC: Update Wikipedia references for mtrand.pyx
  • #7171 <https://github.com/numpy/numpy/pull/7171>__: TST: Fixed f2py test for Anaconda non-win32
  • #7174 <https://github.com/numpy/numpy/pull/7174>__: DOC: Fix broken pandas link in release notes
  • #7177 <https://github.com/numpy/numpy/pull/7177>__: ENH: added axis param for np.count_nonzero
  • #7178 <https://github.com/numpy/numpy/pull/7178>__: BUG: Fix binary_repr for negative numbers
  • #7180 <https://github.com/numpy/numpy/pull/7180>__: BUG: Fixed previous attempt to fix dimension mismatch in nanpercentile
  • #7181 <https://github.com/numpy/numpy/pull/7181>__: DOC: Updated minor typos in function_base.py and test_function_base.py
  • #7191 <https://github.com/numpy/numpy/pull/7191>__: DOC: add vstack, hstack, dstack reference to stack documentation.
  • #7193 <https://github.com/numpy/numpy/pull/7193>__: MAINT: Removed supurious assert in histogram estimators
  • #7194 <https://github.com/numpy/numpy/pull/7194>__: BUG: Raise a quieter MaskedArrayFutureWarning for mask changes.
  • #7195 <https://github.com/numpy/numpy/pull/7195>__: STY: Drop some trailing spaces in numpy.ma.core.
  • #7196 <https://github.com/numpy/numpy/pull/7196>__: Revert "DOC: add vstack, hstack, dstack reference to stack documentation."
  • #7197 <https://github.com/numpy/numpy/pull/7197>__: TST: Pin virtualenv used on Travis CI.
  • #7198 <https://github.com/numpy/numpy/pull/7198>__: ENH: Unlock the GIL for gufuncs
  • #7199 <https://github.com/numpy/numpy/pull/7199>__: MAINT: Cleanup for histogram bin estimator selection
  • #7201 <https://github.com/numpy/numpy/pull/7201>__: Raise IOError on not a file in python2
  • #7202 <https://github.com/numpy/numpy/pull/7202>__: MAINT: Made iterable return a boolean
  • #7209 <https://github.com/numpy/numpy/pull/7209>__: TST: Bump virtualenv to 14.0.6
  • #7211 <https://github.com/numpy/numpy/pull/7211>__: DOC: Fix fmin examples
  • #7215 <https://github.com/numpy/numpy/pull/7215>__: MAINT: Use PySlice_GetIndicesEx instead of custom reimplementation
  • #7229 <https://github.com/numpy/numpy/pull/7229>__: ENH: implement complex
  • #7231 <https://github.com/numpy/numpy/pull/7231>__: MRG: allow distributors to run custom init
  • #7232 <https://github.com/numpy/numpy/pull/7232>__: BLD: Switch order of test for lapack_mkl and openblas_lapack
  • #7239 <https://github.com/numpy/numpy/pull/7239>__: DOC: Removed residual merge markup from previous commit
  • #7240 <https://github.com/numpy/numpy/pull/7240>__: Change 'pubic' to 'public'.
  • #7241 <https://github.com/numpy/numpy/pull/7241>__: MAINT: update doc/sphinxext to numpydoc 0.6.0, and fix up some...
  • #7243 <https://github.com/numpy/numpy/pull/7243>__: ENH: Adding support to the range keyword for estimation of the...
  • #7246 <https://github.com/numpy/numpy/pull/7246>__: DOC: mention writeable keyword in as_strided in release notes
  • #7247 <https://github.com/numpy/numpy/pull/7247>__: TST: Fail quickly on AppVeyor for superseded PR builds
  • #7248 <https://github.com/numpy/numpy/pull/7248>__: DOC: remove link to documentation wiki editor from HOWTO_DOCUMENT.
  • #7250 <https://github.com/numpy/numpy/pull/7250>__: DOC,REL: Update 1.11.0 notes.
  • #7251 <https://github.com/numpy/numpy/pull/7251>__: BUG: only benchmark complex256 if it exists
  • #7252 <https://github.com/numpy/numpy/pull/7252>__: Forward port a fix and enhancement from 1.11.x
  • #7253 <https://github.com/numpy/numpy/pull/7253>__: DOC: note in h/v/dstack points users to stack/concatenate
  • #7254 <https://github.com/numpy/numpy/pull/7254>__: BUG: Enforce dtype for randint singletons
  • #7256 <https://github.com/numpy/numpy/pull/7256>__: MAINT: Use is None or is not None instead of == None or...
  • #7257 <https://github.com/numpy/numpy/pull/7257>__: DOC: Fix mismatched variable names in docstrings.
  • #7258 <https://github.com/numpy/numpy/pull/7258>__: ENH: Make numpy floor_divide and remainder agree with Python...
  • #7260 <https://github.com/numpy/numpy/pull/7260>__: BUG/TST: Fix #7259, do not "force scalar" for already scalar...
  • #7261 <https://github.com/numpy/numpy/pull/7261>__: Added self to mailmap
  • #7266 <https://github.com/numpy/numpy/pull/7266>__: BUG: Segfault for classes with deceptive len
  • #7268 <https://github.com/numpy/numpy/pull/7268>__: ENH: add geomspace function
  • #7274 <https://github.com/numpy/numpy/pull/7274>__: BUG: Preserve array order in np.delete
  • #7275 <https://github.com/numpy/numpy/pull/7275>__: DEP: Warn about assigning 'data' attribute of ndarray
  • #7276 <https://github.com/numpy/numpy/pull/7276>__: DOC: apply_along_axis missing whitespace inserted (before colon)
  • #7278 <https://github.com/numpy/numpy/pull/7278>__: BUG: Make returned unravel_index arrays writeable
  • #7279 <https://github.com/numpy/numpy/pull/7279>__: TST: Fixed elements being shuffled
  • #7280 <https://github.com/numpy/numpy/pull/7280>__: MAINT: Remove redundant trailing semicolons.
  • #7285 <https://github.com/numpy/numpy/pull/7285>__: BUG: Make Randint Backwards Compatible with Pandas
  • #7286 <https://github.com/numpy/numpy/pull/7286>__: MAINT: Fix typos in docs/comments of ma and polynomial modules.
  • #7292 <https://github.com/numpy/numpy/pull/7292>__: Clarify error on repr failure in assert_equal.
  • #7294 <https://github.com/numpy/numpy/pull/7294>__: ENH: add support for BLIS to numpy.distutils
  • #7295 <https://github.com/numpy/numpy/pull/7295>__: DOC: understanding code and getting started section to dev doc
  • #7296 <https://github.com/numpy/numpy/pull/7296>__: Revert part of #3907 which incorrectly propagated MaskedArray...
  • #7299 <https://github.com/numpy/numpy/pull/7299>__: DOC: Fix mismatched variable names in docstrings.
  • #7300 <https://github.com/numpy/numpy/pull/7300>__: DOC: dev: stop recommending keeping local master updated with...
  • #7301 <https://github.com/numpy/numpy/pull/7301>__: DOC: Update release notes
  • #7305 <https://github.com/numpy/numpy/pull/7305>__: BUG: Remove data race in mtrand: two threads could mutate the...
  • #7307 <https://github.com/numpy/numpy/pull/7307>__: DOC: Missing some characters in link.
  • #7308 <https://github.com/numpy/numpy/pull/7308>__: BUG: Incrementing the wrong reference on return
  • #7310 <https://github.com/numpy/numpy/pull/7310>__: STY: Fix GitHub rendering of ordered lists >9
  • #7311 <https://github.com/numpy/numpy/pull/7311>__: ENH: Make _pointer_type_cache functional
  • #7313 <https://github.com/numpy/numpy/pull/7313>__: DOC: corrected grammatical error in quickstart doc
  • #7325 <https://github.com/numpy/numpy/pull/7325>__: BUG, MAINT: Improve fromnumeric.py interface for downstream compatibility
  • #7328 <https://github.com/numpy/numpy/pull/7328>__: DEP: Deprecated using a float index in linspace
  • #7331 <https://github.com/numpy/numpy/pull/7331>__: Add comment, TST: fix MemoryError on win32
  • #7332 <https://github.com/numpy/numpy/pull/7332>__: Check for no solution in np.irr Fixes #6744
  • #7338 <https://github.com/numpy/numpy/pull/7338>__: TST: Install pytz in the CI.
  • #7340 <https://github.com/numpy/numpy/pull/7340>__: DOC: Fixed math rendering in tensordot docs.
  • #7341 <https://github.com/numpy/numpy/pull/7341>__: TST: Add test for #6469
  • #7344 <https://github.com/numpy/numpy/pull/7344>__: DOC: Fix more typos in docs and comments.
  • #7346 <https://github.com/numpy/numpy/pull/7346>__: Generalized flip
  • #7347 <https://github.com/numpy/numpy/pull/7347>__: ENH Generalized rot90
  • #7348 <https://github.com/numpy/numpy/pull/7348>__: Maint: Removed extra space from ureduce
  • #7349 <https://github.com/numpy/numpy/pull/7349>__: MAINT: Hide nan warnings for masked internal MA computations
  • #7350 <https://github.com/numpy/numpy/pull/7350>__: BUG: MA ufuncs should set mask to False, not array([False])
  • #7351 <https://github.com/numpy/numpy/pull/7351>__: TST: Fix some MA tests to avoid looking at the .data attribute
  • #7358 <https://github.com/numpy/numpy/pull/7358>__: BUG: pull request related to the issue #7353
  • #7359 <https://github.com/numpy/numpy/pull/7359>__: Update 7314, DOC: Clarify valid integer range for random.seed...
  • #7361 <https://github.com/numpy/numpy/pull/7361>__: MAINT: Fix copy and paste oversight.
  • #7363 <https://github.com/numpy/numpy/pull/7363>__: ENH: Make no unshare mask future warnings less noisy
  • #7366 <https://github.com/numpy/numpy/pull/7366>__: TST: fix #6542, add tests to check non-iterable argument raises...
  • #7373 <https://github.com/numpy/numpy/pull/7373>__: ENH: Add bitwise_and identity
  • #7378 <https://github.com/numpy/numpy/pull/7378>__: added NumPy logo and separator
  • #7382 <https://github.com/numpy/numpy/pull/7382>__: MAINT: cleanup np.average
  • #7385 <https://github.com/numpy/numpy/pull/7385>__: DOC: note about wheels / windows wheels for PyPI
  • #7386 <https://github.com/numpy/numpy/pull/7386>__: Added label icon to Travis status
  • #7397 <https://github.com/numpy/numpy/pull/7397>__: BUG: incorrect type for objects whose len fails
  • #7398 <https://github.com/numpy/numpy/pull/7398>__: DOC: fix typo
  • #7404 <https://github.com/numpy/numpy/pull/7404>__: Use PyMem_RawMalloc on Python 3.4 and newer
  • #7406 <https://github.com/numpy/numpy/pull/7406>__: ENH ufunc called on memmap return a ndarray
  • #7407 <https://github.com/numpy/numpy/pull/7407>__: BUG: Fix decref before incref for in-place accumulate
  • #7410 <https://github.com/numpy/numpy/pull/7410>__: DOC: add nanprod to the list of math routines
  • #7414 <https://github.com/numpy/numpy/pull/7414>__: Tweak corrcoef
  • #7415 <https://github.com/numpy/numpy/pull/7415>__: DOC: Documentation fixes
  • #7416 <https://github.com/numpy/numpy/pull/7416>__: BUG: Incorrect handling of range in histogram with automatic...
  • #7418 <https://github.com/numpy/numpy/pull/7418>__: DOC: Minor typo fix, hermefik -> hermefit.
  • #7421 <https://github.com/numpy/numpy/pull/7421>__: ENH: adds np.nancumsum and np.nancumprod
  • #7423 <https://github.com/numpy/numpy/pull/7423>__: BUG: Ongoing fixes to PR#7416
  • #7430 <https://github.com/numpy/numpy/pull/7430>__: DOC: Update 1.11.0-notes.
  • #7433 <https://github.com/numpy/numpy/pull/7433>__: MAINT: FutureWarning for changes to np.average subclass handling
  • #7437 <https://github.com/numpy/numpy/pull/7437>__: np.full now defaults to the filling value's dtype.
  • #7438 <https://github.com/numpy/numpy/pull/7438>__: Allow rolling multiple axes at the same time.
  • #7439 <https://github.com/numpy/numpy/pull/7439>__: BUG: Do not try sequence repeat unless necessary
  • #7442 <https://github.com/numpy/numpy/pull/7442>__: MANT: Simplify diagonal length calculation logic
  • #7445 <https://github.com/numpy/numpy/pull/7445>__: BUG: reference count leak in bincount, fixes #6805
  • #7446 <https://github.com/numpy/numpy/pull/7446>__: DOC: ndarray typo fix
  • #7447 <https://github.com/numpy/numpy/pull/7447>__: BUG: scalar integer negative powers gave wrong results.
  • #7448 <https://github.com/numpy/numpy/pull/7448>__: DOC: array "See also" link to full and full_like instead of fill
  • #7456 <https://github.com/numpy/numpy/pull/7456>__: BUG: int overflow in reshape, fixes #7455, fixes #7293
  • #7463 <https://github.com/numpy/numpy/pull/7463>__: BUG: fix array too big error for wide dtypes.
  • #7466 <https://github.com/numpy/numpy/pull/7466>__: BUG: segfault inplace object reduceat, fixes #7465
  • #7468 <https://github.com/numpy/numpy/pull/7468>__: BUG: more on inplace reductions, fixes #615
  • #7469 <https://github.com/numpy/numpy/pull/7469>__: MAINT: Update git .mailmap
  • #7472 <https://github.com/numpy/numpy/pull/7472>__: MAINT: Update .mailmap.
  • #7477 <https://github.com/numpy/numpy/pull/7477>__: MAINT: Yet more .mailmap updates for recent contributors.
  • #7481 <https://github.com/numpy/numpy/pull/7481>__: BUG: Fix segfault in PyArray_OrderConverter
  • #7482 <https://github.com/numpy/numpy/pull/7482>__: BUG: Memory Leak in _GenericBinaryOutFunction
  • #7489 <https://github.com/numpy/numpy/pull/7489>__: Faster real_if_close.
  • #7491 <https://github.com/numpy/numpy/pull/7491>__: DOC: Update subclassing doc regarding downstream compatibility
  • #7496 <https://github.com/numpy/numpy/pull/7496>__: BUG: don't use pow for integer power ufunc loops.
  • #7504 <https://github.com/numpy/numpy/pull/7504>__: DOC: remove "arr" from keepdims docstrings
  • #7505 <https://github.com/numpy/numpy/pull/7505>__: MAIN: fix to #7382, make scl in np.average writeable
  • #7507 <https://github.com/numpy/numpy/pull/7507>__: MAINT: Remove nose.SkipTest import.
  • #7508 <https://github.com/numpy/numpy/pull/7508>__: DOC: link frompyfunc and vectorize
  • #7511 <https://github.com/numpy/numpy/pull/7511>__: numpy.power(0, 0) should return 1
  • #7515 <https://github.com/numpy/numpy/pull/7515>__: BUG: MaskedArray.count treats negative axes incorrectly
  • #7518 <https://github.com/numpy/numpy/pull/7518>__: BUG: Extend glibc complex trig functions blacklist to glibc <...
  • #7521 <https://github.com/numpy/numpy/pull/7521>__: DOC: rephrase writeup of memmap changes
  • #7522 <https://github.com/numpy/numpy/pull/7522>__: BUG: Fixed iteration over additional bad commands
  • #7526 <https://github.com/numpy/numpy/pull/7526>__: DOC: Removed an extra :const:
  • #7529 <https://github.com/numpy/numpy/pull/7529>__: BUG: Floating exception with invalid axis in np.lexsort
  • #7534 <https://github.com/numpy/numpy/pull/7534>__: MAINT: Update setup.py to reflect supported python versions.
  • #7536 <https://github.com/numpy/numpy/pull/7536>__: MAINT: Always use PyCapsule instead of PyCObject in mtrand.pyx
  • #7539 <https://github.com/numpy/numpy/pull/7539>__: MAINT: Cleanup of random stuff
  • #7549 <https://github.com/numpy/numpy/pull/7549>__: BUG: allow graceful recovery for no Linux compiler
  • #7562 <https://github.com/numpy/numpy/pull/7562>__: BUG: Fix test_from_object_array_unicode (test_defchararray.TestBasic)…
  • #7565 <https://github.com/numpy/numpy/pull/7565>__: BUG: Fix test_ctypeslib and test_indexing for debug interpreter
  • #7566 <https://github.com/numpy/numpy/pull/7566>__: MAINT: use manylinux1 wheel for cython
  • #7568 <https://github.com/numpy/numpy/pull/7568>__: Fix a false positive OverflowError in Python 3.x when value above...
  • #7579 <https://github.com/numpy/numpy/pull/7579>__: DOC: clarify purpose of Attributes section
  • #7584 <https://github.com/numpy/numpy/pull/7584>__: BUG: fixes #7572, percent in path
  • #7586 <https://github.com/numpy/numpy/pull/7586>__: Make np.ma.take works on scalars
  • #7587 <https://github.com/numpy/numpy/pull/7587>__: BUG: linalg.norm(): Don't convert object arrays to float
  • #7598 <https://github.com/numpy/numpy/pull/7598>__: Cast array size to int64 when loading from archive
  • #7602 <https://github.com/numpy/numpy/pull/7602>__: DOC: Remove isreal and iscomplex from ufunc list
  • #7605 <https://github.com/numpy/numpy/pull/7605>__: DOC: fix incorrect Gamma distribution parameterization comments
  • #7609 <https://github.com/numpy/numpy/pull/7609>__: BUG: Fix TypeError when raising TypeError
  • #7611 <https://github.com/numpy/numpy/pull/7611>__: ENH: expose test runner raise_warnings option
  • #7614 <https://github.com/numpy/numpy/pull/7614>__: BLD: Avoid using os.spawnve in favor of os.spawnv in exec_command
  • #7618 <https://github.com/numpy/numpy/pull/7618>__: BUG: distance arg of np.gradient must be scalar, fix docstring
  • #7626 <https://github.com/numpy/numpy/pull/7626>__: DOC: RST definition list fixes
  • #7627 <https://github.com/numpy/numpy/pull/7627>__: MAINT: unify tup processing, move tup use to after all PyTuple_SetItem...
  • #7630 <https://github.com/numpy/numpy/pull/7630>__: MAINT: add ifdef around PyDictProxy_Check macro
  • #7631 <https://github.com/numpy/numpy/pull/7631>__: MAINT: linalg: fix comment, simplify math
  • #7634 <https://github.com/numpy/numpy/pull/7634>__: BLD: correct C compiler customization in system_info.py Closes...
  • #7635 <https://github.com/numpy/numpy/pull/7635>__: BUG: ma.median alternate fix for #7592
  • #7636 <https://github.com/numpy/numpy/pull/7636>__: MAINT: clean up testing.assert_raises_regexp, 2.6-specific code...
  • #7637 <https://github.com/numpy/numpy/pull/7637>__: MAINT: clearer exception message when importing multiarray fails.
  • #7639 <https://github.com/numpy/numpy/pull/7639>__: TST: fix a set of test errors in master.
  • #7643 <https://github.com/numpy/numpy/pull/7643>__: DOC : minor changes to linspace docstring
  • #7651 <https://github.com/numpy/numpy/pull/7651>__: BUG: one to any power is still 1. Broken edgecase for int arrays
  • #7655 <https://github.com/numpy/numpy/pull/7655>__: BLD: Remove Intel compiler flag -xSSE4.2
  • #7658 <https://github.com/numpy/numpy/pull/7658>__: BUG: fix incorrect printing of 1D masked arrays
  • #7659 <https://github.com/numpy/numpy/pull/7659>__: BUG: Temporary fix for str(mvoid) for object field types
  • #7664 <https://github.com/numpy/numpy/pull/7664>__: BUG: Fix unicode with byte swap transfer and copyswap
  • #7667 <https://github.com/numpy/numpy/pull/7667>__: Restore histogram consistency
  • #7668 <https://github.com/numpy/numpy/pull/7668>__: ENH: Do not check the type of module.dict explicit in test.
  • #7669 <https://github.com/numpy/numpy/pull/7669>__: BUG: boolean assignment no GIL release when transfer needs API
  • #7673 <https://github.com/numpy/numpy/pull/7673>__: DOC: Create Numpy 1.11.1 release notes.
  • #7675 <https://github.com/numpy/numpy/pull/7675>__: BUG: fix handling of right edge of final bin.
  • #7678 <https://github.com/numpy/numpy/pull/7678>__: BUG: Fix np.clip bug NaN handling for Visual Studio 2015
  • #7679 <https://github.com/numpy/numpy/pull/7679>__: MAINT: Fix up C++ comment in arraytypes.c.src.
  • #7681 <https://github.com/numpy/numpy/pull/7681>__: DOC: Update 1.11.1 release notes.
  • #7686 <https://github.com/numpy/numpy/pull/7686>__: ENH: Changing FFT cache to a bounded LRU cache
  • #7688 <https://github.com/numpy/numpy/pull/7688>__: DOC: fix broken genfromtxt examples in user guide. Closes gh-7662.
  • #7689 <https://github.com/numpy/numpy/pull/7689>__: BENCH: add correlate/convolve benchmarks.
  • #7696 <https://github.com/numpy/numpy/pull/7696>__: DOC: update wheel build / upload instructions
  • #7699 <https://github.com/numpy/numpy/pull/7699>__: BLD: preserve library order
  • #7704 <https://github.com/numpy/numpy/pull/7704>__: ENH: Add bits attribute to np.finfo
  • #7712 <https://github.com/numpy/numpy/pull/7712>__: BUG: Fix race condition with new FFT cache
  • #7715 <https://github.com/numpy/numpy/pull/7715>__: BUG: Remove memory leak in np.place
  • #7719 <https://github.com/numpy/numpy/pull/7719>__: BUG: Fix segfault in np.random.shuffle for arrays of different...
  • #7723 <https://github.com/numpy/numpy/pull/7723>__: Change mkl_info.dir_env_var from MKL to MKLROOT
  • #7727 <https://github.com/numpy/numpy/pull/7727>__: DOC: Corrections in Datetime Units-arrays.datetime.rst
  • #7729 <https://github.com/numpy/numpy/pull/7729>__: DOC: fix typo in savetxt docstring (closes #7620)
  • #7733 <https://github.com/numpy/numpy/pull/7733>__: Update 7525, DOC: Fix order='A' docs of np.array.
  • #7734 <https://github.com/numpy/numpy/pull/7734>__: Update 7542, ENH: Add polyrootval to numpy.polynomial
  • #7735 <https://github.com/numpy/numpy/pull/7735>__: BUG: fix issue on OS X with Python 3.x where npymath.ini was...
  • #7739 <https://github.com/numpy/numpy/pull/7739>__: DOC: Mention the changes of #6430 in the release notes.
  • #7740 <https://github.com/numpy/numpy/pull/7740>__: DOC: add reference to poisson rng
  • #7743 <https://github.com/numpy/numpy/pull/7743>__: Update 7476, DEP: deprecate Numeric-style typecodes, closes #2148
  • #7744 <https://github.com/numpy/numpy/pull/7744>__: DOC: Remove "ones_like" from ufuncs list (it is not)
  • #7746 <https://github.com/numpy/numpy/pull/7746>__: DOC: Clarify the effect of rcond in numpy.linalg.lstsq.
  • #7747 <https://github.com/numpy/numpy/pull/7747>__: Update 7672, BUG: Make sure we don't divide by zero
  • #7748 <https://github.com/numpy/numpy/pull/7748>__: DOC: Update float32 mean example in docstring
  • #7754 <https://github.com/numpy/numpy/pull/7754>__: Update 7612, ENH: Add broadcast.ndim to match code elsewhere.
  • #7757 <https://github.com/numpy/numpy/pull/7757>__: Update 7175, BUG: Invalid read of size 4 in PyArray_FromFile
  • #7759 <https://github.com/numpy/numpy/pull/7759>__: BUG: Fix numpy.i support for numpy API < 1.7.
  • #7760 <https://github.com/numpy/numpy/pull/7760>__: ENH: Make assert_almost_equal & assert_array_almost_equal consistent.
  • #7766 <https://github.com/numpy/numpy/pull/7766>__: fix an English typo
  • #7771 <https://github.com/numpy/numpy/pull/7771>__: DOC: link geomspace from logspace
  • #7773 <https://github.com/numpy/numpy/pull/7773>__: DOC: Remove a redundant the
  • #7777 <https://github.com/numpy/numpy/pull/7777>__: DOC: Update Numpy 1.11.1 release notes.
  • #7785 <https://github.com/numpy/numpy/pull/7785>__: DOC: update wheel building procedure for release
  • #7789 <https://github.com/numpy/numpy/pull/7789>__: MRG: add note of 64-bit wheels on Windows
  • #7791 <https://github.com/numpy/numpy/pull/7791>__: f2py.compile issues (#7683)
  • #7799 <https://github.com/numpy/numpy/pull/7799>__: "lambda" is not allowed to use as keyword arguments in a sample...
  • #7803 <https://github.com/numpy/numpy/pull/7803>__: BUG: interpret 'c' PEP3118/struct type as 'S1'.
  • #7807 <https://github.com/numpy/numpy/pull/7807>__: DOC: Misplaced parens in formula
  • #7817 <https://github.com/numpy/numpy/pull/7817>__: BUG: Make sure npy_mul_with_overflow_<type> detects overflow.
  • #7818 <https://github.com/numpy/numpy/pull/7818>__: numpy/distutils/misc_util.py fix for #7809: check that _tmpdirs...
  • #7820 <https://github.com/numpy/numpy/pull/7820>__: MAINT: Allocate fewer bytes for empty arrays.
  • #7823 <https://github.com/numpy/numpy/pull/7823>__: BUG: Fixed masked array behavior for scalar inputs to np.ma.atleast_*d
  • #7834 <https://github.com/numpy/numpy/pull/7834>__: DOC: Added an example
  • #7839 <https://github.com/numpy/numpy/pull/7839>__: Pypy fixes
  • #7840 <https://github.com/numpy/numpy/pull/7840>__: Fix ATLAS version detection
  • #7842 <https://github.com/numpy/numpy/pull/7842>__: Fix versionadded tags
  • #7848 <https://github.com/numpy/numpy/pull/7848>__: MAINT: Fix remaining uses of deprecated Python imp module.
  • #7853 <https://github.com/numpy/numpy/pull/7853>__: BUG: Make sure numpy globals keep identity after reload.
  • #7863 <https://github.com/numpy/numpy/pull/7863>__: ENH: turn quicksort into introsort
  • #7866 <https://github.com/numpy/numpy/pull/7866>__: Document runtests extra argv
  • #7871 <https://github.com/numpy/numpy/pull/7871>__: BUG: handle introsort depth limit properly
  • #7879 <https://github.com/numpy/numpy/pull/7879>__: DOC: fix typo in documentation of loadtxt (closes #7878)
  • #7885 <https://github.com/numpy/numpy/pull/7885>__: Handle NetBSD specific <sys/endian.h>
  • #7889 <https://github.com/numpy/numpy/pull/7889>__: DOC: #7881. Fix link to record arrays
  • #7894 <https://github.com/numpy/numpy/pull/7894>__: fixup-7790, BUG: construct ma.array from np.array which contains...
  • #7898 <https://github.com/numpy/numpy/pull/7898>__: Spelling and grammar fix.
  • #7903 <https://github.com/numpy/numpy/pull/7903>__: BUG: fix float16 type not being called due to wrong ordering
  • #7908 <https://github.com/numpy/numpy/pull/7908>__: BLD: Fixed detection for recent MKL versions
  • #7911 <https://github.com/numpy/numpy/pull/7911>__: BUG: fix for issue#7835 (ma.median of 1d)
  • #7912 <https://github.com/numpy/numpy/pull/7912>__: ENH: skip or avoid gc/objectmodel differences btwn pypy and cpython
  • #7918 <https://github.com/numpy/numpy/pull/7918>__: ENH: allow numpy.apply_along_axis() to work with ndarray subclasses
  • #7922 <https://github.com/numpy/numpy/pull/7922>__: ENH: Add ma.convolve and ma.correlate for #6458
  • #7925 <https://github.com/numpy/numpy/pull/7925>__: Monkey-patch _msvccompile.gen_lib_option like any other compilators
  • #7931 <https://github.com/numpy/numpy/pull/7931>__: BUG: Check for HAVE_LDOUBLE_DOUBLE_DOUBLE_LE in npy_math_complex.
  • #7936 <https://github.com/numpy/numpy/pull/7936>__: ENH: improve duck typing inside iscomplexobj
  • #7937 <https://github.com/numpy/numpy/pull/7937>__: BUG: Guard against buggy comparisons in generic quicksort.
  • #7938 <https://github.com/numpy/numpy/pull/7938>__: DOC: add cbrt to math summary page
  • #7941 <https://github.com/numpy/numpy/pull/7941>__: BUG: Make sure numpy globals keep identity after reload.
  • #7943 <https://github.com/numpy/numpy/pull/7943>__: DOC: #7927. Remove deprecated note for memmap relevant for Python...
  • #7952 <https://github.com/numpy/numpy/pull/7952>__: BUG: Use keyword arguments to initialize Extension base class.
  • #7956 <https://github.com/numpy/numpy/pull/7956>__: BLD: remove NUMPY_SETUP from builtins at end of setup.py
  • #7963 <https://github.com/numpy/numpy/pull/7963>__: BUG: MSVCCompiler grows 'lib' & 'include' env strings exponentially.
  • #7965 <https://github.com/numpy/numpy/pull/7965>__: BUG: cannot modify tuple after use
  • #7976 <https://github.com/numpy/numpy/pull/7976>__: DOC: Fixed documented dimension of return value
  • #7977 <https://github.com/numpy/numpy/pull/7977>__: DOC: Create 1.11.2 release notes.
  • #7979 <https://github.com/numpy/numpy/pull/7979>__: DOC: Corrected allowed keywords in add_installed_library
  • #7980 <https://github.com/numpy/numpy/pull/7980>__: ENH: Add ability to runtime select ufunc loops, add AVX2 integer...
  • #7985 <https://github.com/numpy/numpy/pull/7985>__: Rebase 7763, ENH: Add new warning suppression/filtering context
  • #7987 <https://github.com/numpy/numpy/pull/7987>__: DOC: See also np.load and np.memmap in np.lib.format.open_memmap
  • #7988 <https://github.com/numpy/numpy/pull/7988>__: DOC: Include docstring for cbrt, spacing and fabs in documentation
  • #7999 <https://github.com/numpy/numpy/pull/7999>__: ENH: add inplace cases to fast ufunc loop macros
  • #8006 <https://github.com/numpy/numpy/pull/8006>__: DOC: Update 1.11.2 release notes.
  • #8008 <https://github.com/numpy/numpy/pull/8008>__: MAINT: Remove leftover imp module imports.
  • #8009 <https://github.com/numpy/numpy/pull/8009>__: DOC: Fixed three typos in the c-info.ufunc-tutorial
  • #8011 <https://github.com/numpy/numpy/pull/8011>__: DOC: Update 1.11.2 release notes.
  • #8014 <https://github.com/numpy/numpy/pull/8014>__: BUG: Fix fid.close() to use os.close(fid)
  • #8016 <https://github.com/numpy/numpy/pull/8016>__: BUG: Fix numpy.ma.median.
  • #8018 <https://github.com/numpy/numpy/pull/8018>__: BUG: Fixes return for np.ma.count if keepdims is True and axis...
  • #8021 <https://github.com/numpy/numpy/pull/8021>__: DOC: change all non-code instances of Numpy to NumPy
  • #8027 <https://github.com/numpy/numpy/pull/8027>__: ENH: Add platform independent lib dir to PYTHONPATH
  • #8028 <https://github.com/numpy/numpy/pull/8028>__: DOC: Update 1.11.2 release notes.
  • #8030 <https://github.com/numpy/numpy/pull/8030>__: BUG: fix np.ma.median with only one non-masked value and an axis...
  • #8038 <https://github.com/numpy/numpy/pull/8038>__: MAINT: Update error message in rollaxis.
  • #8040 <https://github.com/numpy/numpy/pull/8040>__: Update add_newdocs.py
  • #8042 <https://github.com/numpy/numpy/pull/8042>__: BUG: core: fix bug in NpyIter buffering with discontinuous arrays
  • #8045 <https://github.com/numpy/numpy/pull/8045>__: DOC: Update 1.11.2 release notes.
  • #8050 <https://github.com/numpy/numpy/pull/8050>__: remove refcount semantics, now a.resize() almost always requires...
  • #8051 <https://github.com/numpy/numpy/pull/8051>__: Clear signaling NaN exceptions
  • #8054 <https://github.com/numpy/numpy/pull/8054>__: ENH: add signature argument to vectorize for vectorizing like...
  • #8057 <https://github.com/numpy/numpy/pull/8057>__: BUG: lib: Simplify (and fix) pad's handling of the pad_width
  • #8061 <https://github.com/numpy/numpy/pull/8061>__: BUG : financial.pmt modifies input (issue #8055)
  • #8064 <https://github.com/numpy/numpy/pull/8064>__: MAINT: Add PMIP files to .gitignore
  • #8065 <https://github.com/numpy/numpy/pull/8065>__: BUG: Assert fromfile ending earlier in pyx_processing
  • #8066 <https://github.com/numpy/numpy/pull/8066>__: BUG, TST: Fix python3-dbg bug in Travis script
  • #8071 <https://github.com/numpy/numpy/pull/8071>__: MAINT: Add Tempita to randint helpers
  • #8075 <https://github.com/numpy/numpy/pull/8075>__: DOC: Fix description of isinf in nan_to_num
  • #8080 <https://github.com/numpy/numpy/pull/8080>__: BUG: non-integers can end up in dtype offsets
  • #8081 <https://github.com/numpy/numpy/pull/8081>__: Update outdated Nose URL to nose.readthedocs.io
  • #8083 <https://github.com/numpy/numpy/pull/8083>__: ENH: Deprecation warnings for / integer division when running...
  • #8084 <https://github.com/numpy/numpy/pull/8084>__: DOC: Fix erroneous return type description for np.roots.
  • #8087 <https://github.com/numpy/numpy/pull/8087>__: BUG: financial.pmt modifies input #8055
  • #8088 <https://github.com/numpy/numpy/pull/8088>__: MAINT: Remove duplicate randint helpers code.
  • #8093 <https://github.com/numpy/numpy/pull/8093>__: MAINT: fix assert_raises_regex when used as a context manager
  • #8096 <https://github.com/numpy/numpy/pull/8096>__: ENH: Vendorize tempita.
  • #8098 <https://github.com/numpy/numpy/pull/8098>__: DOC: Enhance description/usage for np.linalg.eig*h
  • #8103 <https://github.com/numpy/numpy/pull/8103>__: Pypy fixes
  • #8104 <https://github.com/numpy/numpy/pull/8104>__: Fix test code on cpuinfo's main function
  • #8107 <https://github.com/numpy/numpy/pull/8107>__: BUG: Fix array printing with precision=0.
  • #8109 <https://github.com/numpy/numpy/pull/8109>__: Fix bug in ravel_multi_index for big indices (Issue #7546)
  • #8110 <https://github.com/numpy/numpy/pull/8110>__: BUG: distutils: fix issue with rpath in fcompiler/gnu.py
  • #8111 <https://github.com/numpy/numpy/pull/8111>__: ENH: Add a tool for release authors and PRs.
  • #8112 <https://github.com/numpy/numpy/pull/8112>__: DOC: Fix "See also" links in linalg.
  • #8114 <https://github.com/numpy/numpy/pull/8114>__: BUG: core: add missing error check after PyLong_AsSsize_t
  • #8121 <https://github.com/numpy/numpy/pull/8121>__: DOC: Improve histogram2d() example.
  • #8122 <https://github.com/numpy/numpy/pull/8122>__: BUG: Fix broken pickle in MaskedArray when dtype is object (Return...
  • #8124 <https://github.com/numpy/numpy/pull/8124>__: BUG: Fixed build break
  • #8125 <https://github.com/numpy/numpy/pull/8125>__: Rebase, BUG: Fixed deepcopy of F-order object arrays.
  • #8127 <https://github.com/numpy/numpy/pull/8127>__: BUG: integers to a negative integer powers should error.
  • #8141 <https://github.com/numpy/numpy/pull/8141>__: improve configure checks for broken systems
  • #8142 <https://github.com/numpy/numpy/pull/8142>__: BUG: np.ma.mean and var should return scalar if no mask
  • #8148 <https://github.com/numpy/numpy/pull/8148>__: BUG: import full module path in npy_load_module
  • #8153 <https://github.com/numpy/numpy/pull/8153>__: MAINT: Expose void-scalar "base" attribute in python
  • #8156 <https://github.com/numpy/numpy/pull/8156>__: DOC: added example with empty indices for a scalar, #8138
  • #8160 <https://github.com/numpy/numpy/pull/8160>__: BUG: fix _array2string for structured array (issue #5692)
  • #8164 <https://github.com/numpy/numpy/pull/8164>__: MAINT: Update mailmap for NumPy 1.12.0
  • #8165 <https://github.com/numpy/numpy/pull/8165>__: Fixup 8152, BUG: assert_allclose(..., equal_nan=False) doesn't...
  • #8167 <https://github.com/numpy/numpy/pull/8167>__: Fixup 8146, DOC: Clarify when PyArray_{Max, Min, Ptp} return...
  • #8168 <https://github.com/numpy/numpy/pull/8168>__: DOC: Minor spelling fix in genfromtxt() docstring.
  • #8173 <https://github.com/numpy/numpy/pull/8173>__: BLD: Enable build on AIX
  • #8174 <https://github.com/numpy/numpy/pull/8174>__: DOC: warn that dtype.descr is only for use in PEP3118
  • #8177 <https://github.com/numpy/numpy/pull/8177>__: MAINT: Add python 3.6 support to suppress_warnings
  • #8178 <https://github.com/numpy/numpy/pull/8178>__: MAINT: Fix ResourceWarning new in Python 3.6.
  • #8180 <https://github.com/numpy/numpy/pull/8180>__: FIX: protect stolen ref by PyArray_NewFromDescr in array_empty
  • #8181 <https://github.com/numpy/numpy/pull/8181>__: ENH: Improve announce to find github squash-merge commits.
  • #8182 <https://github.com/numpy/numpy/pull/8182>__: MAINT: Update .mailmap
  • #8183 <https://github.com/numpy/numpy/pull/8183>__: MAINT: Ediff1d performance
  • #8184 <https://github.com/numpy/numpy/pull/8184>__: MAINT: make assert_allclose behavior on nans match pre 1.12
  • #8188 <https://github.com/numpy/numpy/pull/8188>__: DOC: 'highest' is exclusive for randint()
  • #8189 <https://github.com/numpy/numpy/pull/8189>__: BUG: setfield should raise if arr is not writeable
  • #8190 <https://github.com/numpy/numpy/pull/8190>__: ENH: Add a float_power function with at least float64 precision.
  • #8197 <https://github.com/numpy/numpy/pull/8197>__: DOC: Add missing arguments to np.ufunc.outer
  • #8198 <https://github.com/numpy/numpy/pull/8198>__: DEP: Deprecate the keepdims argument to accumulate
  • #8199 <https://github.com/numpy/numpy/pull/8199>__: MAINT: change path to env in distutils.system_info. Closes gh-8195.
  • #8200 <https://github.com/numpy/numpy/pull/8200>__: BUG: Fix structured array format functions
  • #8202 <https://github.com/numpy/numpy/pull/8202>__: ENH: specialize name of dev package by interpreter
  • #8205 <https://github.com/numpy/numpy/pull/8205>__: DOC: change development instructions from SSH to HTTPS access.
  • #8216 <https://github.com/numpy/numpy/pull/8216>__: DOC: Patch doc errors for atleast_nd and frombuffer
  • #8218 <https://github.com/numpy/numpy/pull/8218>__: BUG: ediff1d should return subclasses
  • #8219 <https://github.com/numpy/numpy/pull/8219>__: DOC: Turn SciPy references into links.
  • #8222 <https://github.com/numpy/numpy/pull/8222>__: ENH: Make numpy.mean() do more precise computation
  • #8227 <https://github.com/numpy/numpy/pull/8227>__: BUG: Better check for invalid bounds in np.random.uniform.
  • #8231 <https://github.com/numpy/numpy/pull/8231>__: ENH: Refactor numpy ** operators for numpy scalar integer powers
  • #8234 <https://github.com/numpy/numpy/pull/8234>__: DOC: Clarified when a copy is made in numpy.asarray
  • #8236 <https://github.com/numpy/numpy/pull/8236>__: DOC: Fix documentation pull requests.
  • #8238 <https://github.com/numpy/numpy/pull/8238>__: MAINT: Update pavement.py
  • #8239 <https://github.com/numpy/numpy/pull/8239>__: ENH: Improve announce tool.
  • #8240 <https://github.com/numpy/numpy/pull/8240>__: REL: Prepare for 1.12.x branch
  • #8243 <https://github.com/numpy/numpy/pull/8243>__: BUG: Update operator ** tests for new behavior.
  • #8246 <https://github.com/numpy/numpy/pull/8246>__: REL: Reset strides for RELAXED_STRIDE_CHECKING for 1.12 releases.
  • #8265 <https://github.com/numpy/numpy/pull/8265>__: BUG: np.piecewise not working for scalars
  • #8272 <https://github.com/numpy/numpy/pull/8272>__: TST: Path test should resolve symlinks when comparing
  • #8282 <https://github.com/numpy/numpy/pull/8282>__: DOC: Update 1.12.0 release notes.
  • #8286 <https://github.com/numpy/numpy/pull/8286>__: BUG: Fix pavement.py write_release_task.
  • #8296 <https://github.com/numpy/numpy/pull/8296>__: BUG: Fix iteration over reversed subspaces in mapiter_@name@.
  • #8304 <https://github.com/numpy/numpy/pull/8304>__: BUG: Fix PyPy crash in PyUFunc_GenericReduction.
  • #8319 <https://github.com/numpy/numpy/pull/8319>__: BLD: blacklist powl (longdouble power function) on OS X.
  • #8320 <https://github.com/numpy/numpy/pull/8320>__: BUG: do not link to Accelerate if OpenBLAS, MKL or BLIS are found.
  • #8322 <https://github.com/numpy/numpy/pull/8322>__: BUG: fixed kind specifications for parameters
  • #8336 <https://github.com/numpy/numpy/pull/8336>__: BUG: fix packbits and unpackbits to correctly handle empty arrays
  • #8338 <https://github.com/numpy/numpy/pull/8338>__: BUG: fix test_api test that fails intermittently in python 3
  • #8339 <https://github.com/numpy/numpy/pull/8339>__: BUG: Fix ndarray.tofile large file corruption in append mode.
  • #8359 <https://github.com/numpy/numpy/pull/8359>__: BUG: Fix suppress_warnings (again) for Python 3.6.
  • #8372 <https://github.com/numpy/numpy/pull/8372>__: BUG: Fixes for ma.median and nanpercentile.
  • #8373 <https://github.com/numpy/numpy/pull/8373>__: BUG: correct letter case
  • #8379 <https://github.com/numpy/numpy/pull/8379>__: DOC: Update 1.12.0-notes.rst.
  • #8390 <https://github.com/numpy/numpy/pull/8390>__: ENH: retune apply_along_axis nanmedian cutoff in 1.12
  • #8391 <https://github.com/numpy/numpy/pull/8391>__: DEP: Fix escaped string characters deprecated in Python 3.6.
  • #8394 <https://github.com/numpy/numpy/pull/8394>__: DOC: create 1.11.3 release notes.
  • #8399 <https://github.com/numpy/numpy/pull/8399>__: BUG: Fix author search in announce.py
  • #8402 <https://github.com/numpy/numpy/pull/8402>__: DOC, MAINT: Update 1.12.0 notes and mailmap.
  • #8418 <https://github.com/numpy/numpy/pull/8418>__: BUG: Fix ma.median even elements for 1.12
  • #8424 <https://github.com/numpy/numpy/pull/8424>__: DOC: Fix tools and release notes to be more markdown compatible.
  • #8427 <https://github.com/numpy/numpy/pull/8427>__: BUG: Add a lock to assert_equal and other testing functions
  • #8431 <https://github.com/numpy/numpy/pull/8431>__: BUG: Fix apply_along_axis() for when func1d() returns a non-ndarray.
  • #8432 <https://github.com/numpy/numpy/pull/8432>__: BUG: Let linspace accept input that has an array_interface.
  • #8437 <https://github.com/numpy/numpy/pull/8437>__: TST: Update 3.6-dev tests to 3.6 after Python final release.
  • #8439 <https://github.com/numpy/numpy/pull/8439>__: DOC: Update 1.12.0 release notes.
  • #8466 <https://github.com/numpy/numpy/pull/8466>__: MAINT: Update mailmap entries.
  • #8467 <https://github.com/numpy/numpy/pull/8467>__: DOC: Back-port the missing part of gh-8464.
  • #8476 <https://github.com/numpy/numpy/pull/8476>__: DOC: Update 1.12.0 release notes.
  • #8477 <https://github.com/numpy/numpy/pull/8477>__: DOC: Update 1.12.0 release notes.