doc/src/cli_options/cli_options_example.rst
.. code:: bash
# The configuration file is similar to the command line, with the exception that an equal
# sign '=' must be used between key and value. Example: -i=p1p2 or --interface=p1p2 For
# options with no value (e.g. -v) the equal is also necessary. Example: "-v=" must be used.
#
#
# -G|--pid-path
# Specifies the path where the PID (process ID) is saved. This option is ignored when
# ntopng is controlled with systemd (e.g., service ntopng start).
#
-G=/var/run/ntopng.pid
#
# -i|--interface
# Specifies the network interface or collector endpoint to be used by ntopng for network
# monitoring. On Unix you can specify both the interface name (e.g. lo) or the numeric
# interface id as shown by ntopng -h. On Windows you must use the interface number instead.
# Note that you can specify -i multiple times in order to instruct ntopng to create multi-
# ple interfaces.
#
# -i=eth1
-i=eno1
-i=eno2
-i=lo
-i=tcp://127.0.0.1:5556
# #
# -m|--local-networks
# ntopng determines the ip addresses and netmasks for each active interface. Any traffic on
# those networks is considered local. This parameter allows the user to define additional
# networks and subnetworks whose traffic is also considered local in ntopng reports. All
# other hosts are considered remote. If not specified the default is set to 192.168.1.0/24.
#
# Commas separate multiple network values. Both netmask and CIDR notation may be used,
# even mixed together, for instance "131.114.21.0/24,10.0.0.0/255.0.0.0".
#
-m="10.10.123.0/24=Milan,10.8.124.0/24=Paris,10.7.10.0/24=Rome,10.6.0.0/24=Florence"
#
# -n|--dns-mode
# Sets the DNS address resolution mode: 0 - Decode DNS responses and resolve only local
# (-m) numeric IPs 1 - Decode DNS responses and resolve all numeric IPs 2 - Decode DNS
# responses and don't resolve numeric IPs 3 - Don't decode DNS responses and don't resolve
#
-n=1
#
# -X|--max-num-flows
# Set max number of active flows (default: 131072)
#
-X=500000
#
# -x|--max-num-hosts
# Set max number of active hosts (default: 131072)
#
-x=500000