Node Types and Lifecycle Strategies

Netdata categorizes nodes as ephemeral or permanent to help you tailor alerting, cleanup, and monitoring strategies for dynamic or static infrastructures.

Node Types

:::note

Disconnections in permanent nodes may indicate system failures and require immediate attention.

:::

Key Benefits of Ephemeral Nodes

1. Reduced Alert Noise: Disconnection alerts apply only to permanent nodes.
2. Support for Dynamic Infrastructure: Designate temporary resources as ephemeral to avoid false alarms.
3. Automated Cleanup: Configure retention policies for ephemeral nodes to keep dashboards uncluttered.

Configuring Ephemeral Nodes

By default, Netdata treats all nodes as permanent. To mark a node as ephemeral:

1. Open the netdata.conf file on the target node.
2. Add the following configuration:
   iniCopy

   [global]
       is ephemeral node = yes
   

3. Restart the Netdata Agent.

Once restarted, Netdata automatically applies the _is_ephemeral host label to the node. This label propagates to your Parent nodes and appears in Netdata Cloud, allowing the system to identify and handle the node as ephemeral.

Alerts for Parent Nodes

Netdata v2.3.0 introduces two alerts specific to permanent nodes:

:::important

Both alerts are configured with to: silent by default. They trigger and appear on the Parent dashboard but do not send notifications unless you explicitly enable them. They also apply only to permanent nodes — ephemeral nodes are excluded.

:::

Enabling Notifications for Streaming Alerts

1. Override each alert to send notifications. Choose one method:

   Via Netdata Cloud (recommended): Use the Alerts Configuration Manager to edit streaming_disconnected and streaming_never_connected on the Parent node. The UI creates a dynamic configuration that takes precedence over the stock template. See Alert Configuration Ordering for details. Repeat for both alerts.

   Via config file: On the Parent node, create or edit /etc/netdata/health.d/streaming.conf. An override must be a complete alert definition (see Overriding Stock Alerts); change to: silent to a role. sysadmin is the convention used by the stock alerts; any string is accepted:

   yamlCopy

        template: streaming_disconnected
              on: netdata.streaming_inbound
           class: Availability
            type: Streaming
       component: Streaming
    chart labels: type=permanent
            calc: ${stale disconnected}
           units: nodes
           every: 10s
            warn: $netdata.uptime.uptime > 30 * 60 AND $this > 0
           delay: up 5m down 5m multiplier 1.5 max 30m
         summary: Permanent streaming nodes disconnected
            info: Permanent child nodes disconnected from this parent. \
                  If nodes are expected to disconnect, mark them as ephemeral, by editing their netdata.conf \
                  and setting: [global].is ephemeral node = yes
              to: sysadmin
   

   Repeat for streaming_never_connected — note that template, calc, summary, and info all differ:

   yamlCopy

        template: streaming_never_connected
              on: netdata.streaming_inbound
           class: Availability
            type: Streaming
       component: Streaming
    chart labels: type=permanent
            calc: ${stale archived}
           units: nodes
           every: 10s
            warn: $netdata.uptime.uptime > 30 * 60 AND $this > 0
           delay: up 5m down 5m multiplier 1.5 max 30m
         summary: Permanent streaming nodes never connected
            info: Permanent child nodes never connected to this parent. \
                  If these nodes should actually be ephemeral, run: \
                  netdatacli mark-stale-nodes-ephemeral ALL_NODES
              to: sysadmin
   

   After saving the file, reload health on the Parent:

   bashCopy

   sudo netdatacli reload-health
   

   Make sure the role you choose has recipients wired up in your notification method(s) — see Centralized Cloud Notifications for Cloud setup.

2. Enable Cloud notifications. An administrator must enable Alert notifications for the Space. Without this step, Netdata Cloud will not forward any alert notifications.

See also: Centralized Cloud Notifications for notification setup, and Node States and Transitions for troubleshooting node offline states.

Automatic Node Instance Cleanup in Netdata Cloud

Netdata Cloud automatically removes inactive nodes to keep your dashboards clean and organized.

Cleanup Rules

:::tip

Stale nodes are NOT automatically deleted. Only Offline and Unseen nodes are subject to automatic cleanup. A Stale node has historical data available via a Parent, so it's preserved until the Parent goes offline or the data expires.

:::

:::info Important

If a child node is deleted and later reconnects, it's automatically recreated in Netdata Cloud. Any historical data retained on the Parent node remains accessible.

:::

Monitoring and Managing Node Status

Mark Permanently Offline Nodes as Ephemeral

To mark nodes (including virtual ones) as ephemeral:

netdatacli mark-stale-nodes-ephemeral <node_id | machine_guid | hostname | ALL_NODES>

This keeps historical data queryable and clears active alerts.

flowchart TD
    A("**Offline Node Detected**") -->|Run CLI Command| B("**Use netdatacli mark-stale-nodes-ephemeral**")
    B --> C("**Node Marked as Ephemeral**")
    C --> D("**Metrics Remain Available**")
    C --> E("**Active Alerts Cleared**")
    C --> F{"**Node Reconnects?**"}
    F -->|Yes - no config| G("**Reverts to Permanent**")
    F -->|No| H("**Remains Ephemeral**")
    classDef step fill: #4caf50, stroke: #000000, stroke-width: 3px, color: #000000, font-size: 16px
    classDef alert fill: #ffeb3b, stroke: #000000, stroke-width: 3px, color: #000000, font-size: 16px
    class A step
    class B step
    class C step
    class D step
    class E step
    class F alert
    class G alert
    class H alert

Removing Offline Nodes

To fully remove permanently offline nodes:

netdatacli remove-stale-node <node_id | machine_guid | hostname | ALL_NODES>

:::note

For detailed instructions on removing nodes from Netdata Cloud (including offline and stale nodes, bulk operations, and UI-based removal), see the Remove Node Guide. This covers scenarios where UI removal is disabled due to parent-child configured relationships.

:::

flowchart TD
    A("**Offline Node Detected**") -->|Run CLI Tool| B("**Execute remove-stale-node Command**")
    B --> C("**Node Removed from System**")
    C --> D("**Node No Longer Queryable**")
    C --> E("**Alerts for Node Cleared**")
    classDef step fill: #4caf50, stroke: #000000, stroke-width: 3px, color: #000000, font-size: 16px
    class A step
    class B step
    class C step
    class D step
    class E step

Automatically Removing Ephemeral Nodes

To enable automatic cleanup of ephemeral nodes:

1. Open the netdata.conf file on Netdata Parent nodes.

2. Add the following configuration:

   iniCopy

   [db]
   cleanup ephemeral hosts after = 1d
   

3. Restart the Netdata Agent.

This removes ephemeral nodes after 24 hours of disconnection. Once all Parents purge the node, it is automatically removed from Netdata Cloud.

flowchart TD
    A("**Configure Auto-Removal in netdata.conf**") --> B("**Restart Parent Nodes**")
    B --> C("**Ephemeral Node Disconnects**")
    C --> D{"**Wait Period Elapsed?**"}
    D -->|Yes| E("**Node Automatically Removed**")
    D -->|No| F("**Node Remains in System**")
    E --> G{"**All Parents Removed Node?**"}
    G -->|Yes| H("**Node Removed from Cloud**")
    classDef step fill: #4caf50, stroke: #000000, stroke-width: 3px, color: #000000, font-size: 16px
    classDef alert fill: #ffeb3b, stroke: #000000, stroke-width: 3px, color: #000000, font-size: 16px
    classDef database fill: #2196F3, stroke: #000000, stroke-width: 3px, color: #000000, font-size: 16px
    class A step
    class B step
    class C step
    class D alert
    class E alert
    class F alert
    class G database
     class H database

See Also

• Node States and Transitions - Comprehensive reference for node states (Live, Stale, Offline, Unseen) and transition triggers
• Node Identities - Understand how node identity works alongside ephemerality
• VM Templates - Configure ephemerality in VM templates for auto-scaling groups