documentation/modules/auxiliary/scanner/snmp/snmp_enum.md
This module performs a detailed enumeration of a host or a range through SNMP protocol. It supports hardware, software, and network information.
use auxiliary/scanner/snmp/snmp_enumset RHOSTS [IP]runmsf > use auxiliary/scanner/snmp/snmp_enum
msf auxiliary(auxiliary/scanner/snmp/snmp_enum) > set RHOSTS 1.1.1.2
RHOSTS => 1.1.1.2
msf auxiliary(auxiliary/scanner/snmp/snmp_enum) > run
[*] System information
Hostname : Netgear-GSM7224
Description : GSM7224 L2 Managed Gigabit Switch
Contact : dookie
Location : Basement
Uptime snmp : 56 days, 00:36:28.00
Uptime system : -
System date : -
[*] Network information
IP forwarding enabled : no
Default TTL : 64
TCP segments received : 20782
TCP segments sent : 9973
TCP segments retrans. : 9973
Input datagrams : 4052407
Delivered datagrams : 1155615
Output datagrams : 18261
[*] Network interfaces
Interface [ up ] Unit: 1 Slot: 0 Port: 1 Gigabit - Level
Id : 1
Mac address : 00:0f:b5:fc:bd:24
Type : ethernet-csmacd
Speed : 1000 Mbps
Mtu : 1500
In octets : 3716564861
Out octets : 675201778
...snip...
[*] Routing information
Destination Next hop Mask Metric
0.0.0.0 5.1.168.192 0.0.0.0 1
1.0.0.127 1.0.0.127 255.255.255.255 0
[*] TCP connections and listening ports
Local address Local port Remote address Remote port State
0.0.0.0 23 0.0.0.0 0 listen
0.0.0.0 80 0.0.0.0 0 listen
0.0.0.0 4242 0.0.0.0 0 listen
1.0.0.127 2222 0.0.0.0 0 listen
[*] Listening UDP ports
Local address Local port
0.0.0.0 0
0.0.0.0 161
0.0.0.0 514
[*] Scanned 1 of 1 hosts (100% complete)
[*] Auxiliary module execution completed
msf auxiliary(auxiliary/scanner/snmp/snmp_enum) >