Configuration - Config Instance

Creating Config Instance with TypeAdapterConfig

You may wish to have different settings in different scenarios. If you would not like to apply setting at a static level, Mapster also provides setting instance configurations.

var config = new TypeAdapterConfig();
config.Default.Ignore("Id");

ForType Configuration Methods

For instance configurations, you can use the same NewConfig and ForType methods that are used at the global level with the same behavior: NewConfig drops any existing configuration and ForType creates or enhances a configuration.

config.NewConfig<TSource, TDestination>()
        .Map(dest => dest.FullName,
            src => string.Format("{0} {1}", src.FirstName, src.LastName));

config.ForType<TSource, TDestination>()
        .Map(dest => dest.FullName,
            src => string.Format("{0} {1}", src.FirstName, src.LastName));

Adapt Configuration Methods

You can apply a specific config instance by passing it to the Adapt method. (NOTE: please reuse your config instance to prevent recompilation)

var result = src.Adapt<TDestination>(config);

Map Configuration Methods

Or to a Mapper instance.

var mapper = new Mapper(config);
var result = mapper.Map<TDestination>(src);

Cloning Config Instance

If you would like to create configuration instance from existing configuration, you can use Clone method. For example, if you would like to clone from global setting.

var newConfig = TypeAdapterConfig.GlobalSettings.Clone();

Or clone from existing configuration instance

var newConfig = oldConfig.Clone();

Fork Configuration

Fork is similar to Clone, but Fork will allow you to keep configuration and mapping in the same location. See Config Location for more info.

var forked = mainConfig.Fork(config => 
    config.ForType<Poco, Dto>()
            .Map(dest => dest.code, src => src.Id));

var dto = poco.Adapt<Dto>(forked);