Documentation/scsi/scsi-parameters.rst
.. SPDX-License-Identifier: GPL-2.0
See Documentation/admin-guide/kernel-parameters.rst for general information on specifying module parameters.
This document may not be entirely up to date and comprehensive. The command
modinfo -p ${modulename} shows a current list of all parameters of a loadable
module. Loadable modules, after being loaded into the running kernel, also
reveal their parameters in /sys/module/${modulename}/parameters/. Some of these
parameters may be changed at runtime by the command
echo -n ${value} > /sys/module/${modulename}/parameters/${parm}.
::
advansys= [HW,SCSI]
See header of drivers/scsi/advansys.c.
aha152x= [HW,SCSI]
See Documentation/scsi/aha152x.rst.
aha1542= [HW,SCSI]
Format: <portbase>[,<buson>,<busoff>[,<dmaspeed>]]
aic7xxx= [HW,SCSI]
See Documentation/scsi/aic7xxx.rst.
aic79xx= [HW,SCSI]
See Documentation/scsi/aic79xx.rst.
atascsi= [HW,SCSI]
See drivers/scsi/atari_scsi.c.
BusLogic= [HW,SCSI]
See drivers/scsi/BusLogic.c, comment before function
BusLogic_ParseDriverOptions().
gvp11= [HW,SCSI]
ips= [HW,SCSI] Adaptec / IBM ServeRAID controller
See header of drivers/scsi/ips.c.
mac5380= [HW,SCSI]
See drivers/scsi/mac_scsi.c.
scsi_mod.max_luns=
[SCSI] Maximum number of LUNs to probe.
Should be between 1 and 2^32-1.
scsi_mod.max_report_luns=
[SCSI] Maximum number of LUNs received.
Should be between 1 and 16384.
NCR_D700= [HW,SCSI]
See header of drivers/scsi/NCR_D700.c.
ncr5380= [HW,SCSI]
See Documentation/scsi/g_NCR5380.rst.
ncr53c400= [HW,SCSI]
See Documentation/scsi/g_NCR5380.rst.
ncr53c400a= [HW,SCSI]
See Documentation/scsi/g_NCR5380.rst.
ncr53c8xx= [HW,SCSI]
osst= [HW,SCSI] SCSI Tape Driver
Format: <buffer_size>,<write_threshold>
See also Documentation/scsi/st.rst.
scsi_debug_*= [SCSI]
See drivers/scsi/scsi_debug.c.
scsi_mod.default_dev_flags=
[SCSI] SCSI default device flags
Format: <integer>
scsi_mod.dev_flags=
[SCSI] Black/white list entry for vendor and model
Format: <vendor>:<model>:<flags>
(flags are integer value)
scsi_mod.scsi_logging_level=
[SCSI] a bit mask of logging levels
See drivers/scsi/scsi_logging.h for bits. Also
settable via sysctl at dev.scsi.logging_level
(/proc/sys/dev/scsi/logging_level).
There is also a nice 'scsi_logging_level' script in the
S390-tools package, available for download at
https://github.com/ibm-s390-linux/s390-tools/blob/master/scripts/scsi_logging_level
scsi_mod.scan= [SCSI] sync (default) scans SCSI busses as they are
discovered. async scans them in kernel threads,
allowing boot to proceed. none ignores them, expecting
user space to do the scan.
sim710= [SCSI,HW]
See header of drivers/scsi/sim710.c.
st= [HW,SCSI] SCSI tape parameters (buffers, etc.)
See Documentation/scsi/st.rst.
wd33c93= [HW,SCSI]
See header of drivers/scsi/wd33c93.c.