Documentation/hwmon/tps40422.rst
Supported chips:
TI TPS40422
Prefix: 'tps40422'
Addresses scanned: -
Datasheet: https://www.ti.com/lit/gpn/tps40422
Author: Zhu Laiwen [email protected]
This driver supports TI TPS40422 Dual-Output or Two-Phase Synchronous Buck Controller with PMBus
The driver is a client driver to the core PMBus driver. Please see Documentation/hwmon/pmbus.rst for details on PMBus client drivers.
This driver does not auto-detect devices. You will have to instantiate the devices explicitly. Please see Documentation/i2c/instantiating-devices.rst for details.
The driver supports standard PMBus driver platform data.
The following attributes are supported.
======================= ======================================================= in[1-2]_label "vout[1-2]" in[1-2]_input Measured voltage. From READ_VOUT register. in[1-2]_alarm voltage alarm.
curr[1-2]_input Measured current. From READ_IOUT register. curr[1-2]_label "iout[1-2]" curr1_max Maximum current. From IOUT_OC_WARN_LIMIT register. curr1_crit Critical maximum current. From IOUT_OC_FAULT_LIMIT register. curr1_max_alarm Current high alarm. From IOUT_OC_WARN_LIMIT status. curr1_crit_alarm Current critical high alarm. From IOUT_OC_FAULT status. curr2_alarm Current high alarm. From IOUT_OC_WARNING status.
temp1_input Measured temperature. From READ_TEMPERATURE_2 register on page 0. temp1_max Maximum temperature. From OT_WARN_LIMIT register. temp1_crit Critical high temperature. From OT_FAULT_LIMIT register. temp1_max_alarm Chip temperature high alarm. Set by comparing READ_TEMPERATURE_2 on page 0 with OT_WARN_LIMIT if TEMP_OT_WARNING status is set. temp1_crit_alarm Chip temperature critical high alarm. Set by comparing READ_TEMPERATURE_2 on page 0 with OT_FAULT_LIMIT if TEMP_OT_FAULT status is set. temp2_input Measured temperature. From READ_TEMPERATURE_2 register on page 1. temp2_alarm Chip temperature alarm on page 1. ======================= =======================================================