Documentation/driver-api/serial/driver.rst
This document is meant as a brief overview of some aspects of the new serial driver. It is not complete, any questions you have should be directed to [email protected]
The reference implementation is contained within amba-pl011.c.
The low level serial hardware driver is responsible for supplying port information (defined by uart_port) and a set of control methods (defined by uart_ops) to the core serial driver. The low level driver is also responsible for handling interrupts for the port, and providing any console support.
The serial core provides a few helper functions. This includes decoding command line arguments (uart_parse_options()).
There is also a helper function (uart_console_write()) which performs a character by character write, translating newlines to CRLF sequences. Driver writers are recommended to use this function rather than implementing their own version.
It is the responsibility of the low level hardware driver to perform the necessary locking using port->lock. There are some exceptions (which are described in the struct uart_ops listing below.)
There are two locks. A per-port spinlock, and an overall semaphore.
From the core driver perspective, the port->lock locks the following data::
port->mctrl
port->icount
port->state->xmit.head (circ_buf->head)
port->state->xmit.tail (circ_buf->tail)
The low level driver is free to use this lock to provide any additional locking.
The port_sem semaphore is used to protect against ports being added/ removed or reconfigured at inappropriate times. Since v2.6.27, this semaphore has been the 'mutex' member of the tty_port struct, and commonly referred to as the port mutex.
.. kernel-doc:: include/linux/serial_core.h :identifiers: uart_ops
.. kernel-doc:: drivers/tty/serial/serial_core.c :identifiers: uart_update_timeout uart_get_baud_rate uart_get_divisor uart_match_port uart_write_wakeup uart_register_driver uart_unregister_driver uart_suspend_port uart_resume_port uart_add_one_port uart_remove_one_port uart_console_write uart_parse_earlycon uart_parse_options uart_set_options uart_get_lsr_info uart_handle_dcd_change uart_handle_cts_change uart_try_toggle_sysrq
.. kernel-doc:: include/linux/serial_core.h :identifiers: uart_port_tx_limited uart_port_tx
It is intended some day to drop the 'unused' entries from uart_port, and allow low level drivers to register their own individual uart_port's with the core. This will allow drivers to use uart_port as a pointer to a structure containing both the uart_port entry with their own extensions, thus::
struct my_port {
struct uart_port port;
int my_stuff;
};
Some helpers are provided in order to set/get modem control lines via GPIO.
.. kernel-doc:: drivers/tty/serial/serial_mctrl_gpio.c :identifiers: mctrl_gpio_init mctrl_gpio_to_gpiod mctrl_gpio_set mctrl_gpio_get mctrl_gpio_enable_ms mctrl_gpio_disable_ms_sync mctrl_gpio_disable_ms_no_sync