Blob Columns

Lance can store large binary objects (images, videos, audio, model artifacts) in blob columns, where they are treated like any other column payload in the dataset. Blob columns support both planned full-payload reads and lazy file-like access.

!!! tip "Choosing between read_blobs and take_blobs" - For data loaders and batch processing that need complete byte payloads, use read_blobs. - Use take_blobs when you need a BlobFile handle for streaming, seeking, or partial reads.

If you're unsure about whether you need a blob column in the first place (and why it's useful), read the "when to use blob column vs. inline binary" section below.

Quick Start: Blob v2

This page focuses on blob workflows in Python and uses Lance file format terminology.

• data_storage_version means the Lance file format version of a dataset.
• A dataset's data_storage_version is fixed once the dataset is created.
• If you need a different file format version, write a new dataset.

import lance
import pyarrow as pa
from lance import blob_array, blob_field

schema = pa.schema([
    pa.field("id", pa.int64()),
    blob_field("blob"),
])

table = pa.table(
    {
        "id": [1],
        "blob": blob_array([b"hello blob v2"]),
    },
    schema=schema,
)

ds = lance.write_dataset(table, "./blobs_v22.lance", data_storage_version="2.2")

_row_address, payload = ds.read_blobs("blob", indices=[0])[0]
assert payload == b"hello blob v2"

Version Compatibility

Blob support is tied to the dataset's file format version. Earlier file format versions (< 2.2) stored blobs using the lance-encoding:blob metadata field, while Blob v2 introduces a new storage layout that requires file format >= 2.2.

The two schemes are mutually exclusive: for file format >= 2.2, legacy blob metadata (lance-encoding:blob) is rejected on write. The table below is the single source of truth for which scheme is supported at each data_storage_version.

Blob v2: Write Patterns

Use blob_field and blob_array to build blob v2 columns.

import lance
import pyarrow as pa
from lance import Blob, blob_array, blob_field

schema = pa.schema([
    pa.field("id", pa.int64()),
    blob_field("blob", nullable=True),
])

# A single column can mix:
# - inline bytes
# - external URI
# - external URI slice (position + size)
# - null
rows = pa.table(
    {
        "id": [1, 2, 3, 4],
        "blob": blob_array([
            b"inline-bytes",
            "s3://bucket/path/video.mp4",
            Blob.from_uri("s3://bucket/archive.tar", position=4096, size=8192),
            None,
        ]),
    },
    schema=schema,
)

ds = lance.write_dataset(
    rows,
    "./blobs_v22.lance",
    data_storage_version="2.2",
)

Note:

• By default, external blob URIs must map to a registered non-dataset-root base path.
• If you need to reference external objects outside those bases, set allow_external_blob_outside_bases=True when writing.
• Blob v2 storage layout thresholds can be configured per column with blob_field(..., inline_size_threshold=..., dedicated_size_threshold=...). The inline threshold controls when values move from the data file to packed .blob sidecar storage. The dedicated threshold controls when values move from packed sidecar storage to a dedicated .blob file. The dedicated threshold is checked first. For existing columns, these thresholds are stored in the dataset schema; appends that explicitly provide different threshold metadata for the same column are rejected.
• blob_pack_file_size_threshold is a write option for rolling packed .blob sidecar files. It does not control inline-vs-packed placement.

Example: packed external blobs (single container file)

import io
import tarfile
from pathlib import Path
import lance
import pyarrow as pa
from lance import Blob, blob_array, blob_field

# Build a tar file with three payloads
payloads = {
    "a.bin": b"alpha",
    "b.bin": b"bravo",
    "c.bin": b"charlie",
}

with tarfile.open("container.tar", "w") as tf:
    for name, data in payloads.items():
        info = tarfile.TarInfo(name)
        info.size = len(data)
        tf.addfile(info, io.BytesIO(data))

# Capture offset/size for each member
blob_values = []
with tarfile.open("container.tar", "r") as tf:
    container_uri = Path("container.tar").resolve().as_uri()
    for name in payloads:
        m = tf.getmember(name)
        blob_values.append(Blob.from_uri(container_uri, position=m.offset_data, size=m.size))

schema = pa.schema([
    pa.field("name", pa.utf8()),
    blob_field("blob"),
])

rows = pa.table(
    {
        "name": list(payloads.keys()),
        "blob": blob_array(blob_values),
    },
    schema=schema,
)

ds = lance.write_dataset(
    rows,
    "./packed_blobs_v22.lance",
    data_storage_version="2.2",
    allow_external_blob_outside_bases=True,
)

Blob v2: Read Patterns

Choose the read API based on the payload shape you want:

Do not wrap take_blobs in your own thread pool just to call read() or readall() on every blob. Use read_blobs instead; it plans and executes batched blob reads through Lance's scheduler.

Exactly one selector must be provided to read_blobs or take_blobs: ids, indices, or addresses.

Read complete payloads by row indices

import lance

ds = lance.dataset("./blobs_v22.lance")
rows = ds.read_blobs("blob", indices=[0, 1])
payloads = [payload for _row_address, payload in rows]

Read complete payloads by row ids

import lance

ds = lance.dataset("./blobs_v22.lance")
row_ids = ds.to_table(columns=[], with_row_id=True).column("_rowid").to_pylist()

rows = ds.read_blobs("blob", ids=row_ids[:2])

Read complete payloads by row addresses

import lance

ds = lance.dataset("./blobs_v22.lance")
row_addrs = ds.to_table(columns=[], with_row_address=True).column("_rowaddr").to_pylist()

rows = ds.read_blobs("blob", addresses=row_addrs[:2])

Read blob columns as Arrow binary

import lance

ds = lance.dataset("./blobs_v22.lance")
table = ds.scanner(columns=["blob"], blob_handling="all_binary").to_table()
payloads = table.column("blob").to_pylist()

Open file-like blob handles lazily

import lance

ds = lance.dataset("./blobs_v22.lance")
blobs = ds.take_blobs("blob", indices=[0, 1])

with blobs[0] as f:
    header = f.read(1024)

Example: decode video frames lazily

import av
import lance

ds = lance.dataset("./videos_v22.lance")
blob = ds.take_blobs("video", indices=[0])[0]

start_ms, end_ms = 500, 1000

with av.open(blob) as container:
    stream = container.streams.video[0]
    stream.codec_context.skip_frame = "NONKEY"

    start = (start_ms / 1000) / stream.time_base
    end = (end_ms / 1000) / stream.time_base
    container.seek(int(start), stream=stream)

    for frame in container.decode(stream):
        if frame.time is not None and frame.time > end_ms / 1000:
            break
        # process frame
        pass

Legacy Compatibility (data_storage_version <= 2.1)

If you need to keep writing legacy blob columns, use file format 0.1, 2.0, or 2.1 and mark LargeBinary fields with a metadata kwarg "lance-encoding:blob": true.

import lance
import pyarrow as pa

schema = pa.schema([
    pa.field("id", pa.int64()),
    pa.field(
        "video",
        pa.large_binary(),
        metadata={"lance-encoding:blob": "true"},
    ),
])

table = pa.table(
    {
        "id": [1, 2],
        "video": [b"foo", b"bar"],
    },
    schema=schema,
)

ds = lance.write_dataset(
    table,
    "./legacy_blob_dataset",
    data_storage_version="2.1",
)

As mentioned above, this write pattern is invalid for data_storage_version >= 2.2. For new datasets, it's recommended to use Lance file format 2.2, which uses blob v2 by default.

Rewrite to a New Blob v2 Dataset

If your current dataset consists of legacy blobs (stored in file formats <2.2) and you want to opt in to blob v2, you must rewrite it as a new dataset with data_storage_version="2.2".

import lance
import pyarrow as pa
from lance import blob_array, blob_field

legacy = lance.dataset("./legacy_blob_dataset")
raw = legacy.scanner(columns=["id", "video"], blob_handling="all_binary").to_table()

new_schema = pa.schema([
    pa.field("id", pa.int64()),
    blob_field("video"),
])

rewritten = pa.table(
    {
        "id": raw.column("id"),
        "video": blob_array(raw.column("video").to_pylist()),
    },
    schema=new_schema,
)

lance.write_dataset(
    rewritten,
    "./blob_v22_dataset",
    data_storage_version="2.2",
)

!!! warning - The example above materializes binary payloads in memory (blob_handling="all_binary" and to_pylist()). - For large datasets, prefer chunked/batched rewrite pipelines.

When to Use a Blob Column vs. Inline Binary

Not every binary column needs to be a blob column. Plain Arrow binary/large_binary stores bytes inline, interleaved with your other columns, which is simplest and fastest for really small blobs (e.g., thumbnail images). Using a blob column to store the binary payload makes sense when either of these holds:

• You need partial or streaming reads. Inline binary is always read in full; there is no way to fetch a byte range without materializing the entire value. Blob columns expose take_blobs → BlobFile handles that seek and range-read, so you pay only for the bytes you touch.
• Your values are large (roughly 1 MB or more on average). Operations that rewrite entire rows, such as compaction or some updates, must copy the large inline payloads forward into the new version — even when those bytes never changed. The bigger the payload, the more bytes you rewrite per logical change (write amplification). A blob column keeps large payloads in separate .blob files that are referenced rather than re-copied, so these operations don't rewrite the heavy bytes.

!!! tip As a rule of thumb, if average payload size is below a few tens of KB and you only ever read whole values, plain inline binary is fine. Above ~1 MB, or any time you want file-like access, prefer a blob column. Blob v2 also tunes this automatically: by default it keeps payloads under 16 KiB inline, packs mid-sized payloads into shared .blob sidecars, and gives payloads over 2 MiB their own dedicated .blob file.

Troubleshooting

This section contains commonly noticed issues or errors, and explains how to address them.

Blob v2 requires file version >= 2.2

Cause: You are writing blob v2 values into a dataset/file format below 2.2.
Fix: Write to a dataset created with data_storage_version="2.2" (or newer).

Legacy blob columns ... are not supported for file version >= 2.2

Cause: You are using legacy blob metadata (lance-encoding:blob) while writing 2.2+ data.
Fix: Replace legacy metadata-based columns with blob v2 columns (blob_field / blob_array).

Exactly one of ids, indices, or addresses must be specified

Cause: read_blobs or take_blobs received none or multiple selectors.
Fix: Provide exactly one of ids, indices, or addresses.