content/en/news/releases/1.24.x/announcing-1.24/change-notes/index.md
Added support for attaching policies to ServiceEntry for waypoints.
Added a new annotation, ambient.istio.io/bypass-inbound-capture, that can be applied to make ztunnel only capture outbound traffic.
This can be useful to skip an unnecessary hop for workloads that only accept traffic from out-of-mesh clients (such as internet-facing pods).
Added a new annotation, networking.istio.io/traffic-distribution, that can be applied to make ztunnel prefer sending traffic to local pods.
This behaves the same as the spec.trafficDistribution field on Service, but
allows usage on older Kubernetes versions (as the field was added as beta in Kubernetes 1.31).
Note that waypoints automatically set this.
Fixed an issue preventing server first protocols from working with waypoints.
Improved logs from Envoy when connection failures occur in ambient mode to show more error details.
Added support for Telemetry customization in the waypoint proxy.
Added writing a status condition for binding AuthorizationPolicy to a waypoint proxy.
The formatting of conditions is experimental and will change.
Policy with multiple targetRefs presently receive a single condition.
Once a pattern for conditions with multiple references is adopted by upstream Kubernetes Gateway API, Istio will adopt the convention to provide greater detail when multiple targetRefs are used.
(Issue #52699)
Fixed an issue causing hostNetwork pods to function incorrectly in ambient mode.
Improved how ztunnel determines which Pod it is acting on behalf of. Previously, this relied on IP addresses, which was unreliable in some scenarios.
Fixed an issue causing any portLevelSettings to be ignored in DestinationRule in waypoints. (Issue #52532)
Fixed an issue when using mirror policies with waypoints. (Issue #52713)
Added support for connection.sni rule in AuthorizationPolicy applied to a waypoint.
(Issue #52752)
Updated the redirection method used in Ambient from TPROXY to REDIRECT.
For most users, this should have no impact, but fixes a few compatibility issues with TPROXY. (Issue #52260), (Issue #52576)
Promoted Istio dual-stack support to Alpha (Issue #47998)
Added warmup.aggression, warmup.duration, warmup.minimumPercent parameters to DestinationRule to provide more control on warmup behavior.
(Issue #3215)
Added retry policy for inbound requests that automatically resets the requests that the service has not seen/processed.
It can be reverted by setting ENABLE_INBOUND_RETRY_POLICY to false.
(Issue #51704)
Fixed default retry policy to exclude retries on 503 which is potentially unsafe for idempotent requests.
This behavior can be temporarily reverted with EXCLUDE_UNSAFE_503_FROM_DEFAULT_RETRY=false.
(Issue #50506)
Updated the behavior of XDS generation to be aligned when a user has a Sidecar configured and when they do not. See upgrade notes for more information.
Improved Istiod's validation webhook to accept versions it does not know about. This ensures that an older Istio can validate resources created by newer CRDs.
Improved support for dual-stack services by associating multiple IPs with one single endpoint, rather than treating them as two distinct endpoints. (Issue #40394)
Added support for matching multiple IPs (for dual-stack services) in HTTP route.
Added VirtualService sourceNamespaces will now be taken into account when filtering unneeded configuration.
Added support for by passing overload manager for static listeners. This can be reverted by setting
BYPASS_OVERLOAD_MANAGER_FOR_STATIC_LISTENERS to false in agent Deployment. (Issue #41859), (Issue #52663)
Added new istiod environment variable ENVOY_DNS_JITTER_DURATION, with a default value of 100ms that sets jitter for periodic DNS resolution.
See dns_jitter in https://www.envoyproxy.io/docs/envoy/latest/api-v3/config/cluster/v3/cluster.proto.
This can help decrease the load on the cluster DNS server.
(Issue #52877)
Added support for configuring certificate details while populating XFCC header via a new ProxyConfig field, proxyHeaders.setCurrentClientCertDetails.
Added Allow users to put extra white spaces between namespaces in networking.istio.io/exportTo annotation.
(Issue #53429)
Added an experimental feature to enable lazily create subset of Envoy statistics.
This will save memory and CPU cycles when creating the objects that own these stats,
if those stats are never referenced throughout the lifetime of the process.
This can be disabled by setting ENABLE_DEFERRED_STATS_CREATION to false in agent Deployment.
Fixed matching multiple service VIPs in ServiceEntry. See upgrade notes for more information. (Issue #51747), (Issue #30282)
Fixed MeshConfig's serviceSettings.settings.clusterLocal to favor more precise hostnames, allowing host exclusions.
Fixed DestinationRules on same host to not merge if they have different exportTo values.
The hold behavior can be temporarily restored with ENABLE_ENHANCED_DESTINATIONRULE_MERGE=false.
(Issue #52519)
Fixed an issue where controller-assigned IPs did not respect per-proxy DNS capture the same way that ephemeral auto-allocated IPs did. (Issue #52609)
Fixed an issue causing Waypoints to ignore auto-allocated IPs for ServiceEntry in some cases.
(Issue #52746)
Fixed an issue where the ISTIO_OUTPUT iptables chain was not removed with pilot-agent istio-clean-iptables command. (Issue #52835)
Fixed an issue where using HTTPS in slow request scenarios such as high packet loss networks could potentially lead to Envoy memory leak. (Issue #52850)
Fixed a bug where DNS proxying contained unready endpoints for headless services.
Removed the deprecated istio.io/gateway-name label, please use gateway.networking.k8s.io/gateway-name label instead.
Removed writing kubeconfig to CNI net directory.
(Issue #52315)
Removed CNI_NET_DIR from the istio-cni configmap, as it now does nothing.
(Issue #52315)
Updated CEL vocabulary used in the telemetry APIs and extensions. See upgrade notes for more information.
Added add new pattern variable (%SERVICE_NAME%) for stat prefix
(Issue #52177)
Added logAsJson value to ztunnel helm chart
(Issue #52631)
Added stats tags configuration for watchdog metrics. (Issue #52731)
Added support headers and timeout configurations of gRPC requests when exporting traces to OpenTelemetry Collector. (Issue #52873)
Added support customized Zipkin collector endpoint under meshConfig.extensionProviders.zipkin.path. (Issue #53086)
Fixed Added the metrics port to the pods created by Gateway automated deployments.
Fixed The citadel_server_root_cert_expiry_timestamp, citadel_server_root_cert_expiry_seconds, citadel_server_cert_chain_expiry_timestamp, and citadel_server_cert_chain_expiry_seconds update when new certificates are loaded.
Added SECRET_GRACE_PERIOD_RATIO_JITTER with a default value of 0.01 to introduce a randomized offset in SECRET_GRACE_PERIOD_RATIO.
Without this configuration, proxies deployed at the same time will all request renewed certificates simultaneously which can cause excessive CA server load.
The new default behavior of renewing certificates every 12 hours is augmented by this value to be +/- approximately 15 minutes.
(Issue #52102)
Updated securityContext.privileged to false for istio-cni in favor of feature-specific permissions.
istio-cni remains a "privileged" container as per the Kubernetes Pod Security Standards, since even without this
flag it has privileged capabilities, namely CAP_SYS_ADMIN.
(Issue #52558)
Improved Waypoint resources are now configurable using global.waypoint.resources.
(Issue #51496)
Improved Waypoint pod affinity is now configurable using waypoint.affinity.
(Issue #52883)
Improved Waypoint pod topologySpreadConstraints are now configurable using global.waypoint.topologySpreadConstraints.
(Issue #52901)
Improved Waypoint pod tolerations are now configurable using global.waypoint.tolerations.
(Issue #52901)
Improved Waypoint pod nodeSelector are now configurable using global.waypoint.nodeSelector.
(Issue #52901)
Improved the memory footprint of the istio-cni-node DaemonSet. In many cases this can result in up to 80% memory reduction.
(Issue #53493)
Updated Kiali addon sample to version v2.0.
Updated all Istio components to read v1 CRDs where applicable. This should have no impact, unless the cluster is using Istio CRDs from 1.21 or older (which is not a supported version skew).
Added the app.kubernetes.io/name, app.kubernetes.io/instance, app.kubernetes.io/part-of, app.kubernetes.io/version, app.kubernetes.io/managed-by, and helm.sh/chart labels to almost all resources.
(Issue #52034)
Added Platform-specific configurations for Helm installs. Example:
helm install istio-cni --set profile=ambient --set global.platform=k3s
helm install istiod --set profile=ambient --set global.platform=k3s
For list of currently-supported platform overrides, see manifests/charts/platform-xxx.yaml files.
Removed the openshift profile variants, replaced with global.platform overrides. Example:
helm install istio-cni --set profile=ambient-openshift is now
helm install istio-cni --set profile=ambient --set global.platform=openshift
Added Add the ability to configure initContainers for Istiod.
(Issue #53120)
Added Add settings (strategy, minReadySeconds, and terminationGracePeriodSeconds) to stabilize gateways for high traffic.
(Issue #53121)
Added value seLinuxOptions to istio-cni chart. On some platforms (e.g. OpenShift) it is necessary to set
seLinuxOptions.type to spc_t in order to work around some SELinux constraints related to hostPath volumes.
Without this setting, the istio-cni-node pods may fail to start. (Issue #53558)
Added support for providing arbitrary environment variables to istio-cni chart
Added a new annotation sidecar.istio.io/nativeSidecar to allow users to control native sidecar injection on a per-pod basis.
This annotation can be set to true or false to enable or disable native sidecar injection for a pod.
This annotation takes precedence over the global ENABLE_NATIVE_SIDECARS environment variable.
(Issue #53452)
Added Allow user to add customized annotation to MutatingWebhookConfiguration for revision-tags through helm chart.
Fixed kube-virt-interfaces rules not being removed by istio-clean-iptables tool.
(Issue #48368)
Fixed Allow for re-executions of istio-iptables by skipping apply step if existing rules are compatible.
Fixed an issue where some installation status lines were not finalized correctly which can cause odd rendering when terminal windows are resized. (Issue #52525)
Fixed Set allowPrivilegeEscalation to true in ztunnel - it has always been forced to true in reality but K8S does not properly validate this: https://github.com/kubernetes/kubernetes/issues/119568.
Fixed Remove non-critical components from base chart, and remove pilot.enabled from
istiod-remote and istio-discovery charts.
Fixed templated CRD installation in the base chart by default. Previously this only worked under certain conditions,
and when certain install flags were used, could result in CRDs that could only be upgraded via manual kubectl intervention.
See upgrade notes for more information.
Deprecated Values.base.enableCRDTemplates. This option now defaults to true and will be removed
in a future release. Until then, the legacy behavior can be enabled by setting this to false
(Issue #43204)
Removed some fields from the helm values API that had been without effect and in some cases long-deprecated.
Removed fields are: pilot.configNamespace, pilot.configSource, pilot.enableProtocolSniffingForOutbound, pilot.enableProtocolSniffingForInbound, pilot.useMCP,
global.autoscalingV2API, global.configRootNamespace, global.defaultConfigVisibilitySettings, global.useMCP, sidecarInjectorWebhook.objectSelector, and sidecarInjectorWebhook.useLegacySelectors.
(Issue #51987)
Removed unused istio_cni values from the istiod chart that were marked as deprecated (#49290) 2 releases ago.
(Issue #52645)
Removed istiod-remote chart in favor of helm install istio-discovery --set profile=remote.
Removed support for the 1.20 compatibilityProfile. This configured the following settings: ENABLE_EXTERNAL_NAME_ALIAS,
PERSIST_OLDEST_FIRST_HEURISTIC_FOR_VIRTUAL_SERVICE_HOST_MATCHING, VERIFY_CERTIFICATE_AT_CLIENT, and ENABLE_AUTO_SNI.
All of these flags, except for ENABLE_AUTO_SNI, have also been removed from Istio entirely.
Removed the sidecar.istio.io/enableCoreDump annotation. See the sample provided in samples/proxy-coredump for more preferred approaches to enable core dumps.
Removed the legacy --log_rotate_* flag options. Users wishing to use log rotation should use external log rotation tools.
Added automatic detection of a variety of platform-specific incompatibilities during installation.
Added a new command, istioctl manifest translate, to help migrate from istioctl install to helm.
Added a new flag remote-contexts to the istioctl analyze command to specify remote cluster contexts during multi-cluster analysis.
(Issue #51934)
Added support for filtering Pods by label selector to istioctl x envoy-stats.
Added support for filtering resources by namespace to istioctl experimental injector list.
Added support for the --impersonate flags in the istioctl.
(Issue #52285)
Fixed istioctl analyze report IST0145 error with wildcard host and specific subdomain. (Issue #52413)
Fixed istioctl experimental injector list prints webhooks not related to istio.
Removed istioctl manifest diff and istioctl manifest profile diff commands. Users looking to compare manifest can use generic YAML comparison tools.
Removed istioctl profile command. The same information can be found in Istio documentation.
sleep sample to curl.
(Issue #15725)