content/en/news/releases/1.21.x/announcing-1.21/change-notes/index.md
Improved pilot-agent to return the HTTP probe body and status code from the probe setting in the container.
Improved support for ExternalName services. See Upgrade Notes for more information.
Improved the variables PILOT_MAX_REQUESTS_PER_SECOND (which rate limits the incoming requests, previously defaulted to 25.0)
and PILOT_PUSH_THROTTLE (which limits the number of concurrent responses, previously defaulted to 100) to automatically scale with the
CPU size Istiod is running on if not explicitly configured.
Added the ability to configure the IPv4 loopback CIDR used by istio-iptables in various firewall rules.
(Issue #47211)
Added support for automatically setting default network for workloads if they are added to the ambient mesh before the network topology is set.
Before, when you set topology.istio.io/network on your Istio root namespace, you needed to manually rollout the ambient workloads to make the network change take effect.
Now, the network of ambient workloads will be automatically updated even if they do not have a network label.
Note that if your ztunnel is not in the same network as what you set in the topology.istio.io/network label in your Istio
root namespace, your ambient workloads will not be able to communicate with each other.
Added namespace discovery selector support on gateway deployment controller. It is protected under ENABLE_ENHANCED_RESOURCE_SCOPING.
When enabled, the gateway controller will only watch the k8s gateways that match the selector. Note it will affect both gateway and waypoint deployment.
Added support for the delta ADS client.
Added support for concurrent SidecarScope conversion. You can use PILOT_CONVERT_SIDECAR_SCOPE_CONCURRENCY to adjust the number of concurrent executions.
Its default value is 1 and will not be executed concurrently.
When initSidecarScopes consumes a lot of time and you want to reduce time consumption by increasing CPU consumption,
you can increase the number of concurrent executions by increasing the value of PILOT_CONVERT_SIDECAR_SCOPE_CONCURRENCY.
Added support for setting the :authority header in virtual service's HTTPRouteDestination. Now, we support host rewrite for both host and :authority.
Added prefixes to the WasmPlugin resource name.
Added support for setting idle_timeout in TcpProxy filters for outbound traffic.
Added support for In-Cluster Gateway Deployments.
Deployments now have both istio.io/gateway-name and gateway.networking.k8s.io/gateway-name labels like Pods and Services.
Added support for max concurrent streams settings in the DestinationRules HTTP traffic policy for HTTP2 connections.
(Issue #47166)
Added support for setting TCP idle timeout for HTTP services.
Added connection pool settings to the Sidecar API to enable configuring the inbound connection pool for sidecars in the mesh.
Previously, the DestinationRule's connection pool settings applied to both client and server sidecars. Using the updated Sidecar API,
it's now possible to configure the server's connection pool separately from the clients' in the mesh.
(reference)
(Issue #32130), (Issue #41235)
Added idle_timeout to the TCP settings in the DestinationRule API to enable configuring idle timeout per TcpProxy filter.
Enabled the Envoy configuration to use an endpoint cache when there is a delay in sending endpoint configurations from Istiod when a cluster is updated.
Fixed a bug where overlapping wildcard hosts in a VirtualService would produce incorrect routing configuration
when wildcard services were selected (e.g. in ServiceEntries).
(Issue #45415)
Fixed an issue where the WasmPlugin resource was not correctly applied to the waypoint.
(Issue #47227)
Fixed an issue where sometimes the network of waypoint was not properly configured.
Fixed an issue where the pilot-agent istio-clean-iptables command was not able to clean up the iptables rules generated for the Istio DNS proxy.
(Issue #47957)
Fixed slow cleanup of auto-registered WorkloadEntry resources when auto-registration and cleanup would occur
shortly after the initial WorkloadGroup creation.
(Issue #44640)
Fixed an issue where Istio was performing additional XDS pushes for StatefulSets/headless Service endpoints while scaling.
(Issue #48207)
Fixed a memory leak caused when a remote cluster is deleted or kubeConfig is rotated.
(Issue #48224)
Fixed an issue where if a DestinationRule's exportTo includes a workload's current namespace (not '.'), other namespaces are ignored from exportTo.
(Issue #48349)
Fixed an issue where the QUIC listeners were not correctly created when dual-stack is enabled. (Issue #48336)
Fixed an issue where convertToEnvoyFilterWrapper returned an invalid patch that could cause a null pointer exception when it was applied.
Fixed an issue where updating a Service's targetPort does not trigger an xDS push.
(Issue #48580)
Fixed an issue where in-cluster analysis was unnecessarily performed when there was no configuration change. (Issue #48665)
Fixed a bug that results in the incorrect generation of configurations for pods without associated services, which includes all services within the same namespace. This can occasionally lead to conflicting inbound listeners error.
Fixed an issue where new endpoints may not be sent to proxies. (Issue #48373)
Fixed Gateway API AllowedRoutes handling for NotIn and DoesNotExist label selector match expressions.
(Issue #48044)
Fixed VirtualService HTTP header present match not working when header-name: {} is set.
(Issue #47341)
Fixed multi-cluster leader election not prioritizing local over remote leader. (Issue #47901)
Fixed a memory leak when hostNetwork Pods scale up and down.
(Issue #47893)
Fixed a memory leak when WorkloadEntries change their IP address.
(Issue #47893)
Fixed a memory leak when a ServiceEntry is removed.
(Issue #47893)
Fixed a bug when there is more than one service with the
same host name within the same namespace, a
STRICT_DNS cluster without endpoints error could occur.
(Issue #49489)
Fixed an issue that when using a delegate in
a VirtualService, the effective VirtualService may not
be consistent with expectations due to a sorting error.
(Issue #49539)
Fixed a bug where specifying a URI regex .* match within a VirtualService HTTP route did not short-circuit the subsequent HTTP routes.
Fixed sending stale name table when pure HTTP headless service endpoints are changed.
Fixed a bug for IPv6 only clusters that prevented ServiceEntry-based listeners from having correct SNI matches. (Issue #49476)
Fixed an issue where the local client contained incorrect entries in the local DNS name table. (Issue #47340)
Fixed a bug where VirtualService containing wildcard hosts that aren't present in the service registry are ignored.
(Issue #49364)
Upgraded ambient traffic capture and redirection compatibility by switching to an in-pod mechanism. (Issue #48212)
Removed the PILOT_ENABLE_INBOUND_PASSTHROUGH environment variable, which has been enabled-by-default for the past 8 releases.
Improved request JWT authentication to use the upstream Envoy JWT filter
instead of the custom Istio Proxy filter. Because the new upstream JWT filter
capabilities are needed, the feature is gated for the proxies that support
them. Note that a custom Envoy or Wasm filter that used istio_authn dynamic
metadata key needs to be updated to use envoy.filters.http.jwt_authn
dynamic metadata key.
Updated the default value of the feature flag ENABLE_AUTO_SNI to true. If undesired,
please use the new compatibilityVersion feature to fallback to old behavior.
Updated the default value of the feature flag VERIFY_CERT_AT_CLIENT to true.
This means server certificates will be automatically verified using the OS CA certificates
when not using a DestinationRule caCertificates field.
If undesired, please use the new compatibilityVersion feature
to fallback to old behavior, or insecureSkipVerify field
in DestinationRule to skip the verification.
Added an environment variable COMPLIANCE_POLICY to
Istio components for enforcing TLS restriction for compliance
with FIPS. When set to fips-140-2 on the Istiod container,
the Istio Proxy container, and all other Istio components,
TLS version is restricted to v1.2, the cipher suites to a
subset of ECDHE-ECDSA-AES128-GCM-SHA256,ECDHE-RSA-AES128-GCM-SHA256,
ECDHE-ECDSA-AES256-GCM-SHA384, ECDHE-RSA-AES256-GCM-SHA384,
and ECDH curves to P-256.
These restrictions apply on the following data paths:
The restrictions are not applied on the following data paths:
Note that Istio injector will propagate the value of COMPLIANCE_POLICY to the injected proxy container,
when set. (Issue #49081)
Added the ability for waypoints to run as non-root. (Issue #46592)
Added a fallback field for PrivateKeyProvider to support falling back to the default
BoringSSL implementation if the private key provider isn’t available.
Added support to retrieve JWT from cookies. (Issue #47847)
Fixed a bug that made PeerAuthentication too restrictive in ambient mode.
Fixed an issue where auto-san-validation was enabled even
when SNI was explicitly set in the DestinationRule.
Fixed an issue where gateways were unable to fetch JWKS from jwksUri in RequestAuthentication
when PILOT_FILTER_GATEWAY_CLUSTER_CONFIG was enabled and PILOT_JWT_ENABLE_REMOTE_JWKS was set to
hybrid/true/envoy.
Improved JSON access logs to emit keys in a stable ordering.
Added support for brotli, gzip, and zstd compression for the Envoy stats endpoint.
(Issue #30987)
Added the istio.cluster_id tag to all tracing spans.
(Issue #48336)
Fixed a bug where destination_cluster reported by client proxies was occasionally incorrect
when accessing workloads in a different network.
Removed legacy EnvoyFilter implementation for Telemetry. For the majority of users, this change has no impact, and
was already enabled in previous releases. However, the following fields are no longer respected: prometheus.configOverride,
stackdriver.configOverride, stackdriver.disableOutbound, stackdriver.outboundAccessLogging.
Added support for outbound traffic using the PROXY Protocol. By specifying proxyProtocol in a DestinationRule trafficPolicy,
the sidecar will send PROXY Protocol headers to the upstream service. This feature is not supported for HBONE proxy at the present time.
Added support for matching ApplicationProtocols in an EnvoyFilter.
Removed support for the policy/v1beta1 API version of PodDisruptionBudget.
Removed using the BOOTSTRAP_XDS_AGENT experimental feature to
apply BOOTSTRAP EnvoyFilter patches at startup.
Improved aborting graceful termination logic if the Envoy process terminates early. (Issue #36686)
Updated Kiali addon to version v1.79.0.
Added configurable scaling behavior for Gateway HPA in the Helm chart. (usage)
Added allocateLoadBalancerNodePorts config option to the Gateway chart.
(Issue #48751)
Added a message to indicate the default webhook shifting from a revisioned installation to a default installation. (Issue #48643)
Added the affinity field to Istiod Deployment. This field is used to control the scheduling of Istiod pods.
Added tolerations field to Istiod Deployment. This field is used to control the scheduling of Istiod pods.
Added support for "profiles" to Helm installation. Try it out with --set profile=demo!
(Issue #47838)
Added the setting priorityClassName: system-node-critical to the ztunnel DaemonSet template to ensure it is running on all nodes.
(Issue #47867)
Fixed an issue where the webhook generated with istioctl tag set is unexpectedly removed by the installer.
(Issue #47423)
Fixed an issue where uninstalling Istio didn't prune all the resources created by custom files. (Issue #47960)
Fixed an issue where injection failed when the name of the Pod or its custom owner exceeded 63 characters.
Fixed an issue causing Istio CNI to stop functioning on minimal/locked down nodes (such as no sh binary).
The new logic runs with no external dependencies, and will attempt
to continue if errors are encountered (which could be caused by things like SELinux rules).
In particular, this fixes running Istio on Bottlerocket nodes.
(Issue #48746)
Fixed custom injection of the istio-proxy container not
working on OpenShift because of the way OpenShift sets pods'
SecurityContext.RunAs field.
Fixed veth lookup for ztunnel pod on OpenShift where default CNIs do not create routes for each veth interface.
Fixed an issue where installing with Stackdriver and having custom configs would lead to Stackdriver not being enabled.
Fixed an issue where Endpoint and Service in the istiod-remote chart did not respect the revision value. (Issue #47552)
Removed support for .Values.cni.psp_cluster_role as part of installation, as PodSecurityPolicy
was deprecated.
Removed the istioctl experimental revision command. Revisions can be inspected by the stable istioctl tag list command.
Removed the installed-state IstioOperator that was created when running istioctl install.
This previously provided only a snapshot of what was installed.
However, it was a common source of confusion (as users would change it and nothing would happen), and did not reliably represent the current state.
As there is no IstioOperator needed for these usages anymore, istioctl install and helm install no longer install the IstioOperator CRD.
Note this only impacts istioctl install, not the in-cluster operator.
Improved injector list to exclude ambient namespaces.
Improved bug-report performance by reducing the amount of calls to the k8s API.
The pod/node details included in the report will look different, but contain the same information.
Improved istioctl bug-report to sort gathered events by creation date.
Updated verify-install to not require a IstioOperator file, since it is now removed from the installation process.
Added support for deleting multiple waypoints at once via istioctl experimental waypoint delete <waypoint1> <waypoint2> ....
Added the --all flag to istioctl experimental waypoint delete to delete all waypoint resources in a given namespace.
Added an analyzer to warn users if they set the selector field instead of the targetRef field for
specific Istio resources, which will cause the resource to be ineffective.
(Issue #48273)
Added message IST0167 to warn users that policies, such as Sidecar, will have no impact when applied to ambient namespaces. (Issue #48105)
Added bootstrap summary to all config dumps' summary.
Added completion for Kubernetes pods for some commands that can select pods, such as istioctl proxy-status <pod>.
Added --wait option to the istioctl experimental waypoint apply command.
(Issue #46297)
Added path_separated_prefix to the MATCH column in the output of proxy-config routes command.
Fixed an issue where sometimes control plane revisions and proxy versions were not obtained in the bug report.
Fixed an issue where istioctl tag list command didn't accept --output flag.
(Issue #47696)
Fixed an issue where the default namespace of Envoy and proxy dashboard command was not set to the actual default namespace.
Fixed an issue where the IST0158 message was incorrectly reported when the imageType field was set to distroless in mesh config.
(Issue #47964)
Fixed an issue where istioctl experimental version has no proxy info shown.
Fixed an issue where the IST0158 message was incorrectly reported when the imageType field was
set by the ProxyConfig resource, or the resource annotation proxy.istio.io/config.
Fixed an issue where proxy-config ecds didn't show all of EcdsConfigDump.
Fixed injector list having duplicated namespaces shown for the same injector hook.
Fixed analyze not working correctly when analyzing files containing resources that already exist in the cluster.
(Issue #44844)
Fixed analyze where it was reporting errors for empty files.
(Issue #45653)
Fixed an issue where the External Control Plane Analyzer was not working in some remote control plane setups.
Fixed an issue where istioctl precheck inaccurately reports the IST0141 message related to resource permissions.
(Issue #49379)
Removed the --rps-limit flag for istioctl bug-report and added the --rq-concurrency flag.
The bug reporter will now limit request concurrency instead of limiting request rate to the Kube API.
httpbin sample manifests to deploy correctly on OpenShift.