Documentation/History.md
ws2812b LED mod for Pinecil V2 (Must be hand compiled).The Sequre S60 uses JBC tips, which makes it quite useful for the smaller tip types and extra options available.
The TS101 is the evolution of the TS100, picking up USB-PD. It has otherwise similar tip support to the TS100/Pinecil/PinecilV2.
Absolutely massive kudos goes to @VioletEternity for her work on the reverse engineering of this. If you at all are helped by IronOS running on this device more credit goes to her than to I. Also big thanks to @whitequark for organising + supporting + magic.
This lets you define a heat profile and run this profile akin to a proper reflow device. This can be used on the MHP30 by long-holding the A button (aka start button). Profile can be edited in settings.
To prevent this release being held up forever, the TS101 and S60 are being released with a limitation on the OLED screen. The current code will only draw to the upper left corner of the screen. Assets have been made for rendering this at full size, but the code is not complete yet.
For Pinecil V2 users blisp is currently my recommended CLI tool for updating the device. It is built for all main OS's automatically. This does not apply to V1 devices. If your iron came with a blue grip, its a V1 and update the same as always. If your device came with a green silicone grip its a V2 device.
Alternatively you can use Spagett1's PineFlash tool that should provide a GUI interface for PinecilV1 & PinecilV2.
For a small number of V2 Pinecil devices there appears to be an interference issue between the Bluetooth Low Energy and some devices; more information here. If this occurs to you, please let us know in the issue and rollback to 2.20 for now.
.dfu files for ease of use with Pinecilmetadata.zip file to allow the Pine Updater to automatically fetch information on releasesmetadata.zip is only designed for use by automatic software, ignore it for normal usee065be3 after one bug with the BMA223 was found..dfu files from .bin to make flashing commands easierThe MHP30 is a small reflow station from Miniware. Thanks to a massive amount of help from @g3gg0 this firmware brings the beginnings of support for this unit. Also kudo's to @Vinigas and @GoJian for helping with testing. This is not a final version I'm sure, but this is a working, usable version of firmware support. Programs the same as any one Miniware unit using drag and drop. Note: The boot logo scripts will need updates for this unit, so not supported yet.
The flood doors are now open for feature requests for this unit :)
Fixing auto rotation bug in the LIS accelerometer in the TS80/TS80P
Adds support for two new accelerometers -- SC7A20 (Future Pinecil batch) #786 -- MSA301 (Newer TS80P) #761
Add warnings if accelerometer or USB-PD IC's are not detected #752 -- Only shows for first few boots, to help catch unsupported models
Fixed cooling down blink to be sane speed #769
Cleanup of threads and slightly faster power negotiation #790
Updates to flashing scripts #775
Documentation updates all over the place (and the wiki was given a cleanup)|
Updates to makefile #792 #787
Cleanup the folder name of the source code #800
clang-format spec setup #801