README

Acrylic Case

This design is licensed under the GPL-2.0 license. Documentation is licensed under the GPL-2.0 license.

The vector graphic file provided in this repo was created with Inkscape.

The BOM

• 4 x 4.5 mm OD Hex Standoffs (Female-Female) / M3-0.5 x 6 mm / Aluminum
• 4 x 4.5 mm OD Hex Standoffs (Female-Female) / M3-0.5 x 5 mm / Aluminum
• 4 x M3-0.5 x 12 mm / Phillips Pan Head Machine Screw
• 4 x M3-0.5 x 5 mm / Phillips Pan Head Machine Screw

Optional:

• 4 (per neighbor) x 4.5 mm OD Hex Standoffs (Male-Female) / M3-0.5 x 11 mm / Aluminum

These standoffs are t### The BOM

• 4 x 4.5 mm OD Hex Standoffs (Female-Female) / M3-0.5 x 6 mm / Aluminum
• 4 x 4.5 mm OD Hex Standoffs (Female-Female) / M3-0.5 x 5 mm / Aluminum
• 4 x M3-0.5 x 12 mm / Phillips Pan Head Machine Screw
• 4 x M3-0.5 x 5 mm / Phillips Pan Head Machine Screw

Optional:

• 4 (per neighbor) x 4.5 mm OD Hex Standoffs (Male-Female) / M3-0.5 x 11 mm / Aluminum

These standoffs are to be used if a neighbor is stacked on your HackRF One and you want your case to be stacked above that neighbor.

Assembly Instructions

Assembly instructions can be found here.