third_party/libassimp/contrib/utf8cpp/doc/utf8cpp.html
Many C++ developers miss an easy and portable way of handling Unicode encoded strings. The original C++ Standard (known as C++98 or C++03) is Unicode agnostic. C++11 provides some support for Unicode on core language and library level: u8, u, and U character and string literals, char16_t and char32_t character types, u16string and u32string library classes, and codecvt support for conversions between Unicode encoding forms. In the meantime, developers use third party libraries like ICU, OS specific capabilities, or simply roll out their own solutions.
In order to easily handle UTF-8 encoded Unicode strings, I came up with a small generic library. For anybody used to work with STL algorithms and iterators, it should be easy and natural to use. The code is freely available for any purpose - check out the license at the beginning of the utf8.h file. If you run into bugs or performance issues, please let me know and I'll do my best to address them.
The purpose of this article is not to offer an introduction to Unicode in general, and UTF-8 in particular. If you are not familiar with Unicode, be sure to check out Unicode Home Page or some other source of information for Unicode. Also, it is not my aim to advocate the use of UTF-8 encoded strings in C++ programs; if you want to handle UTF-8 encoded strings from C++, I am sure you have good reasons for it.
To illustrate the use of the library, let's start with a small but complete program that opens a file containing UTF-8 encoded text, reads it line by line, checks each line for invalid UTF-8 byte sequences, and converts it to UTF-16 encoding and back to UTF-8:
#include \<fstream\>#include \<iostream\>#include \<string\>#include \<vector\>#include "utf8.h"using namespacestd;intmain(intargc,char** argv)
{if(argc !=2) {
cout <<"\nUsage: docsample filename\n";return0;
}const char* test_file_path = argv[1];// Open the test file (contains UTF-8 encoded text)ifstream fs8(test_file_path);if(!fs8.is_open()) {
cout <<"Could not open "<< test_file_path << endl;return0;
}unsignedline_count =1;
string line;// Play with all the lines in the filewhile(getline(fs8, line)) {// check for invalid utf-8 (for a simple yes/no check, there is also utf8::is\_valid function)string::iterator end_it = utf8::find_invalid(line.begin(), line.end());if(end_it != line.end()) {
cout <<"Invalid UTF-8 encoding detected at line "<< line_count <<"\n";
cout <<"This part is fine: "<< string(line.begin(), end_it) <<"\n";
}// Get the line length (at least for the valid part)intlength = utf8::distance(line.begin(), end_it);
cout <<"Length of line "<< line_count <<" is "<< length <<"\n";// Convert it to utf-16vector<unsigned short> utf16line;
utf8::utf8to16(line.begin(), end_it, back_inserter(utf16line));// And back to utf-8string utf8line;
utf8::utf16to8(utf16line.begin(), utf16line.end(), back_inserter(utf8line));// Confirm that the conversion went OK:if(utf8line != string(line.begin(), end_it))
cout <<"Error in UTF-16 conversion at line: "<< line_count <<"\n";
line_count++;
}return0;
}
In the previous code sample, for each line we performed a detection of invalid UTF-8 sequences with find_invalid; the number of characters (more precisely - the number of Unicode code points, including the end of line and even BOM if there is one) in each line was determined with a use of utf8::distance; finally, we have converted each line to UTF-16 encoding with utf8to16 and back to UTF-8 with utf16to8.
Here is a function that checks whether the content of a file is valid UTF-8 encoded text without reading the content into the memory:
boolvalid_utf8_file(iconst char* file_name)
{
ifstream ifs(file_name);if(!ifs)return false;// even better, throw hereistreambuf_iterator<char> it(ifs.rdbuf());
istreambuf_iterator<char> eos;returnutf8::is_valid(it, eos);
}
Because the function utf8::is_valid() works with input iterators, we were able to pass an istreambuf_iterator to it and read the content of the file directly without loading it to the memory first.
Note that other functions that take input iterator arguments can be used in a similar way. For instance, to read the content of a UTF-8 encoded text file and convert the text to UTF-16, just do something like:
utf8::utf8to16(it, eos, back_inserter(u16string));
If we have some text that "probably" contains UTF-8 encoded text and we want to replace any invalid UTF-8 sequence with a replacement character, something like the following function may be used:
voidfix_utf8_string(std::string& str)
{
std::string temp;
utf8::replace_invalid(str.begin(), str.end(), back_inserter(temp));
str = temp;
}
The function will replace any invalid UTF-8 sequence with a Unicode replacement character. There is an overloaded function that enables the caller to supply their own replacement character.
Available in version 1.0 and later.
Encodes a 32 bit code point as a UTF-8 sequence of octets and appends the sequence to a UTF-8 string.
template<typenameoctet_iterator>
octet_iterator append(uint32_t cp, octet_iterator result);
octet_iterator: an output iterator.
cp: a 32 bit integer representing a code point to append to the sequence.
result: an output iterator to the place in the sequence where to append the code point.
Return value: an iterator pointing to the place after the newly appended sequence.
Example of use:
unsigned charu[5] = {0,0,0,0,0};unsigned char* end = append(0x0448, u);
assert (u[0] ==0xd1&& u[1] ==0x88&& u[2] ==0&& u[3] ==0&& u[4] ==0);
Note that append does not allocate any memory - it is the burden of the caller to make sure there is enough memory allocated for the operation. To make things more interesting, append can add anywhere between 1 and 4 octets to the sequence. In practice, you would most often want to use std::back_inserter to ensure that the necessary memory is allocated.
In case of an invalid code point, a utf8::invalid_code_point exception is thrown.
Available in version 1.0 and later.
Given the iterator to the beginning of the UTF-8 sequence, it returns the code point and moves the iterator to the next position.
template<typenameoctet_iterator>
uint32_t next(octet_iterator& it, octet_iterator end);
octet_iterator: an input iterator.
it: a reference to an iterator pointing to the beginning of an UTF-8 encoded code point. After the function returns, it is incremented to point to the beginning of the next code point.
end: end of the UTF-8 sequence to be processed. If it gets equal to end during the extraction of a code point, an utf8::not_enough_room exception is thrown.
Return value: the 32 bit representation of the processed UTF-8 code point.
Example of use:
char* twochars ="\xe6\x97\xa5\xd1\x88";char* w = twochars;intcp = next(w, twochars +6);
assert (cp ==0x65e5);
assert (w == twochars +3);
This function is typically used to iterate through a UTF-8 encoded string.
In case of an invalid UTF-8 seqence, a utf8::invalid_utf8 exception is thrown.
Available in version 2.1 and later.
Given the iterator to the beginning of the UTF-8 sequence, it returns the code point for the following sequence without changing the value of the iterator.
template<typenameoctet_iterator>
uint32_t peek_next(octet_iterator it, octet_iterator end);
octet_iterator: an input iterator.
it: an iterator pointing to the beginning of an UTF-8 encoded code point.
end: end of the UTF-8 sequence to be processed. If it gets equal to end during the extraction of a code point, an utf8::not_enough_room exception is thrown.
Return value: the 32 bit representation of the processed UTF-8 code point.
Example of use:
char* twochars ="\xe6\x97\xa5\xd1\x88";char* w = twochars;intcp = peek_next(w, twochars +6);
assert (cp ==0x65e5);
assert (w == twochars);
In case of an invalid UTF-8 seqence, a utf8::invalid_utf8 exception is thrown.
Available in version 1.02 and later.
Given a reference to an iterator pointing to an octet in a UTF-8 sequence, it decreases the iterator until it hits the beginning of the previous UTF-8 encoded code point and returns the 32 bits representation of the code point.
template<typenameoctet_iterator>
uint32_t prior(octet_iterator& it, octet_iterator start);
octet_iterator: a bidirectional iterator.
it: a reference pointing to an octet within a UTF-8 encoded string. After the function returns, it is decremented to point to the beginning of the previous code point.
start: an iterator to the beginning of the sequence where the search for the beginning of a code point is performed. It is a safety measure to prevent passing the beginning of the string in the search for a UTF-8 lead octet.
Return value: the 32 bit representation of the previous code point.
Example of use:
char* twochars ="\xe6\x97\xa5\xd1\x88";unsigned char* w = twochars +3;intcp = prior (w, twochars);
assert (cp ==0x65e5);
assert (w == twochars);
This function has two purposes: one is two iterate backwards through a UTF-8 encoded string. Note that it is usually a better idea to iterate forward instead, since utf8::next is faster. The second purpose is to find a beginning of a UTF-8 sequence if we have a random position within a string. Note that in that case utf8::prior may not detect an invalid UTF-8 sequence in some scenarios: for instance if there are superfluous trail octets, it will just skip them.
it will typically point to the beginning of a code point, and start will point to the beginning of the string to ensure we don't go backwards too far. it is decreased until it points to a lead UTF-8 octet, and then the UTF-8 sequence beginning with that octet is decoded to a 32 bit representation and returned.
In case start is reached before a UTF-8 lead octet is hit, or if an invalid UTF-8 sequence is started by the lead octet, an invalid_utf8 exception is thrown.
In case start equals it, a not_enough_room exception is thrown.
Deprecated in version 1.02 and later.
Given a reference to an iterator pointing to an octet in a UTF-8 seqence, it decreases the iterator until it hits the beginning of the previous UTF-8 encoded code point and returns the 32 bits representation of the code point.
template<typenameoctet_iterator>
uint32_t previous(octet_iterator& it, octet_iterator pass_start);
octet_iterator: a random access iterator.
it: a reference pointing to an octet within a UTF-8 encoded string. After the function returns, it is decremented to point to the beginning of the previous code point.
pass_start: an iterator to the point in the sequence where the search for the beginning of a code point is aborted if no result was reached. It is a safety measure to prevent passing the beginning of the string in the search for a UTF-8 lead octet.
Return value: the 32 bit representation of the previous code point.
Example of use:
char* twochars ="\xe6\x97\xa5\xd1\x88";unsigned char* w = twochars +3;intcp = previous (w, twochars -1);
assert (cp ==0x65e5);
assert (w == twochars);
utf8::previous is deprecated, and utf8::prior should be used instead, although the existing code can continue using this function. The problem is the parameter pass_start that points to the position just before the beginning of the sequence. Standard containers don't have the concept of "pass start" and the function can not be used with their iterators.
it will typically point to the beginning of a code point, and pass_start will point to the octet just before the beginning of the string to ensure we don't go backwards too far. it is decreased until it points to a lead UTF-8 octet, and then the UTF-8 sequence beginning with that octet is decoded to a 32 bit representation and returned.
In case pass_start is reached before a UTF-8 lead octet is hit, or if an invalid UTF-8 sequence is started by the lead octet, an invalid_utf8 exception is thrown
Available in version 1.0 and later.
Advances an iterator by the specified number of code points within an UTF-8 sequence.
template<typenameoctet_iterator, typename distance_type>voidadvance (octet_iterator& it, distance_type n, octet_iterator end);
octet_iterator: an input iterator.
distance_type: an integral type convertible to octet_iterator's difference type.
it: a reference to an iterator pointing to the beginning of an UTF-8 encoded code point. After the function returns, it is incremented to point to the nth following code point.
n: a positive integer that shows how many code points we want to advance.
end: end of the UTF-8 sequence to be processed. If it gets equal to end during the extraction of a code point, an utf8::not_enough_room exception is thrown.
Example of use:
char* twochars ="\xe6\x97\xa5\xd1\x88";unsigned char* w = twochars;
advance (w,2, twochars +6);
assert (w == twochars +5);
This function works only "forward". In case of a negative n, there is no effect.
In case of an invalid code point, a utf8::invalid_code_point exception is thrown.
Available in version 1.0 and later.
Given the iterators to two UTF-8 encoded code points in a seqence, returns the number of code points between them.
template<typenameoctet_iterator>typenamestd::iterator_traits<octet_iterator>::difference_type distance (octet_iterator first, octet_iterator last);
octet_iterator: an input iterator.
first: an iterator to a beginning of a UTF-8 encoded code point.
last: an iterator to a "post-end" of the last UTF-8 encoded code point in the sequence we are trying to determine the length. It can be the beginning of a new code point, or not.
Return value the distance between the iterators, in code points.
Example of use:
char* twochars ="\xe6\x97\xa5\xd1\x88";
size_t dist = utf8::distance(twochars, twochars +5);
assert (dist ==2);
This function is used to find the length (in code points) of a UTF-8 encoded string. The reason it is called distance, rather than, say, length is mainly because developers are used that length is an O(1) function. Computing the length of an UTF-8 string is a linear operation, and it looked better to model it after std::distance algorithm.
In case of an invalid UTF-8 seqence, a utf8::invalid_utf8 exception is thrown. If last does not point to the past-of-end of a UTF-8 seqence, a utf8::not_enough_room exception is thrown.
Available in version 1.0 and later.
Converts a UTF-16 encoded string to UTF-8.
template<typenameu16bit_iterator,typenameoctet_iterator>
octet_iterator utf16to8 (u16bit_iterator start, u16bit_iterator end, octet_iterator result);
u16bit_iterator: an input iterator.
octet_iterator: an output iterator.
start: an iterator pointing to the beginning of the UTF-16 encoded string to convert.
end: an iterator pointing to pass-the-end of the UTF-16 encoded string to convert.
result: an output iterator to the place in the UTF-8 string where to append the result of conversion.
Return value: An iterator pointing to the place after the appended UTF-8 string.
Example of use:
unsigned shortutf16string[] = {0x41,0x0448,0x65e5,0xd834,0xdd1e};
vector<unsigned char> utf8result;
utf16to8(utf16string, utf16string +5, back_inserter(utf8result));
assert (utf8result.size() ==10);
In case of invalid UTF-16 sequence, a utf8::invalid_utf16 exception is thrown.
Available in version 1.0 and later.
Converts an UTF-8 encoded string to UTF-16
template<typenameu16bit_iterator, typename octet_iterator>
u16bit_iterator utf8to16 (octet_iterator start, octet_iterator end, u16bit_iterator result);
octet_iterator: an input iterator.
u16bit_iterator: an output iterator.
start: an iterator pointing to the beginning of the UTF-8 encoded string to convert. < br /> end: an iterator pointing to pass-the-end of the UTF-8 encoded string to convert.
result: an output iterator to the place in the UTF-16 string where to append the result of conversion.
Return value: An iterator pointing to the place after the appended UTF-16 string.
Example of use:
charutf8_with_surrogates[] ="\xe6\x97\xa5\xd1\x88\xf0\x9d\x84\x9e";
vector <unsigned short> utf16result;
utf8to16(utf8_with_surrogates, utf8_with_surrogates +9, back_inserter(utf16result));
assert (utf16result.size() ==4);
assert (utf16result[2] ==0xd834);
assert (utf16result[3] ==0xdd1e);
In case of an invalid UTF-8 seqence, a utf8::invalid_utf8 exception is thrown. If end does not point to the past-of-end of a UTF-8 seqence, a utf8::not_enough_room exception is thrown.
Available in version 1.0 and later.
Converts a UTF-32 encoded string to UTF-8.
template<typenameoctet_iterator, typename u32bit_iterator>
octet_iterator utf32to8 (u32bit_iterator start, u32bit_iterator end, octet_iterator result);
octet_iterator: an output iterator.
u32bit_iterator: an input iterator.
start: an iterator pointing to the beginning of the UTF-32 encoded string to convert.
end: an iterator pointing to pass-the-end of the UTF-32 encoded string to convert.
result: an output iterator to the place in the UTF-8 string where to append the result of conversion.
Return value: An iterator pointing to the place after the appended UTF-8 string.
Example of use:
intutf32string[] = {0x448,0x65E5,0x10346,0};
vector<unsigned char> utf8result;
utf32to8(utf32string, utf32string +3, back_inserter(utf8result));
assert (utf8result.size() ==9);
In case of invalid UTF-32 string, a utf8::invalid_code_point exception is thrown.
Available in version 1.0 and later.
Converts a UTF-8 encoded string to UTF-32.
template<typenameoctet_iterator,typenameu32bit_iterator>
u32bit_iterator utf8to32 (octet_iterator start, octet_iterator end, u32bit_iterator result);
octet_iterator: an input iterator.
u32bit_iterator: an output iterator.
start: an iterator pointing to the beginning of the UTF-8 encoded string to convert.
end: an iterator pointing to pass-the-end of the UTF-8 encoded string to convert.
result: an output iterator to the place in the UTF-32 string where to append the result of conversion.
Return value: An iterator pointing to the place after the appended UTF-32 string.
Example of use:
char* twochars ="\xe6\x97\xa5\xd1\x88";
vector<int> utf32result;
utf8to32(twochars, twochars +5, back_inserter(utf32result));
assert (utf32result.size() ==2);
In case of an invalid UTF-8 seqence, a utf8::invalid_utf8 exception is thrown. If end does not point to the past-of-end of a UTF-8 seqence, a utf8::not_enough_room exception is thrown.
Available in version 1.0 and later.
Detects an invalid sequence within a UTF-8 string.
template<typenameoctet_iterator>
octet_iterator find_invalid(octet_iterator start, octet_iterator end);
octet_iterator: an input iterator.
start: an iterator pointing to the beginning of the UTF-8 string to test for validity.
end: an iterator pointing to pass-the-end of the UTF-8 string to test for validity.
Return value: an iterator pointing to the first invalid octet in the UTF-8 string. In case none were found, equals end.
Example of use:
charutf_invalid[] ="\xe6\x97\xa5\xd1\x88\xfa";char* invalid = find_invalid(utf_invalid, utf_invalid +6);
assert (invalid == utf_invalid +5);
This function is typically used to make sure a UTF-8 string is valid before processing it with other functions. It is especially important to call it if before doing any of the unchecked operations on it.
Available in version 1.0 and later.
Checks whether a sequence of octets is a valid UTF-8 string.
template<typenameoctet_iterator>boolis_valid(octet_iterator start, octet_iterator end);
octet_iterator: an input iterator.
start: an iterator pointing to the beginning of the UTF-8 string to test for validity.
end: an iterator pointing to pass-the-end of the UTF-8 string to test for validity.
Return value: true if the sequence is a valid UTF-8 string; false if not.
Example of use:
charutf_invalid[] ="\xe6\x97\xa5\xd1\x88\xfa";boolbvalid = is_valid(utf_invalid, utf_invalid +6);
assert (bvalid == false);
is_valid is a shorthand for find_invalid(start, end) == end;. You may want to use it to make sure that a byte seqence is a valid UTF-8 string without the need to know where it fails if it is not valid.
Available in version 2.0 and later.
Replaces all invalid UTF-8 sequences within a string with a replacement marker.
template<typenameoctet_iterator,typenameoutput_iterator>
output_iterator replace_invalid(octet_iterator start, octet_iterator end, output_iterator out, uint32_t replacement);template<typenameoctet_iterator,typenameoutput_iterator>
output_iterator replace_invalid(octet_iterator start, octet_iterator end, output_iterator out);
octet_iterator: an input iterator.
output_iterator: an output iterator.
start: an iterator pointing to the beginning of the UTF-8 string to look for invalid UTF-8 sequences.
end: an iterator pointing to pass-the-end of the UTF-8 string to look for invalid UTF-8 sequences.
out: An output iterator to the range where the result of replacement is stored.
replacement: A Unicode code point for the replacement marker. The version without this parameter assumes the value 0xfffd
Return value: An iterator pointing to the place after the UTF-8 string with replaced invalid sequences.
Example of use:
charinvalid_sequence[] ="a\x80\xe0\xa0\xc0\xaf\xed\xa0\x80z";
vector<char> replace_invalid_result;
replace_invalid (invalid_sequence, invalid_sequence + sizeof(invalid_sequence), back_inserter(replace_invalid_result),'?');
bvalid = is_valid(replace_invalid_result.begin(), replace_invalid_result.end());
assert (bvalid);char* fixed_invalid_sequence ="a????z";
assert (std::equal(replace_invalid_result.begin(), replace_invalid_result.end(), fixed_invalid_sequence));
replace_invalid does not perform in-place replacement of invalid sequences. Rather, it produces a copy of the original string with the invalid sequences replaced with a replacement marker. Therefore, out must not be in the [start, end] range.
If end does not point to the past-of-end of a UTF-8 sequence, a utf8::not_enough_room exception is thrown.
Available in version 2.3 and later. Relaces deprecated is_bom() function.
Checks whether an octet sequence starts with a UTF-8 byte order mark (BOM)
template<typenameoctet_iterator>boolstarts_with_bom (octet_iterator it, octet_iterator end);
octet_iterator: an input iterator.
it: beginning of the octet sequence to check
end: pass-end of the sequence to check
Return value: true if the sequence starts with a UTF-8 byte order mark; false if not.
Example of use:
unsigned charbyte_order_mark[] = {0xef,0xbb,0xbf};boolbbom = starts_with_bom(byte_order_mark, byte_order_mark +sizeof(byte_order_mark));
assert (bbom ==true);
The typical use of this function is to check the first three bytes of a file. If they form the UTF-8 BOM, we want to skip them before processing the actual UTF-8 encoded text.
Available in version 1.0 and later. Deprecated in version 2.3. starts_with_bom() should be used instead.
Checks whether a sequence of three octets is a UTF-8 byte order mark (BOM)
template<typenameoctet_iterator>boolis_bom (octet_iterator it); // Deprecated
octet_iterator: an input iterator.
it: beginning of the 3-octet sequence to check
Return value: true if the sequence is UTF-8 byte order mark; false if not.
Example of use:
unsigned charbyte_order_mark[] = {0xef,0xbb,0xbf};boolbbom = is_bom(byte_order_mark);
assert (bbom ==true);
The typical use of this function is to check the first three bytes of a file. If they form the UTF-8 BOM, we want to skip them before processing the actual UTF-8 encoded text.
If a sequence is shorter than three bytes, an invalid iterator will be dereferenced. Therefore, this function is deprecated in favor of starts_with_bom()that takes the end of sequence as an argument.
Available in version 2.3 and later.
Base class for the exceptions thrown by UTF CPP library functions.
classexception :publicstd::exception {};
Example of use:
try{
code_that_uses_utf_cpp_library();
}catch(constutf8::exception& utfcpp_ex) {
cerr << utfcpp_ex.what();
}
Available in version 1.0 and later.
Thrown by UTF8 CPP functions such as advance and next if an UTF-8 sequence represents and invalid code point.
classinvalid_code_point :publicexception {public:
uint32_t code_point()const;
};
Member function code_point() can be used to determine the invalid code point that caused the exception to be thrown.
Available in version 1.0 and later.
Thrown by UTF8 CPP functions such as next and prior if an invalid UTF-8 sequence is detected during decoding.
classinvalid_utf8 :publicexception {public:
uint8_t utf8_octet()const;
};
Member function utf8_octet() can be used to determine the beginning of the byte sequence that caused the exception to be thrown.
Available in version 1.0 and later.
Thrown by UTF8 CPP function utf16to8 if an invalid UTF-16 sequence is detected during decoding.
classinvalid_utf16 :publicexception {public:
uint16_t utf16_word()const;
};
Member function utf16_word() can be used to determine the UTF-16 code unit that caused the exception to be thrown.
Available in version 1.0 and later.
Thrown by UTF8 CPP functions such as next if the end of the decoded UTF-8 sequence was reached before the code point was decoded.
classnot_enough_room :publicexception {};
Available in version 2.0 and later.
Adapts the underlying octet iterator to iterate over the sequence of code points, rather than raw octets.
template<typenameoctet_iterator>classiterator;
iterator(); the deafult constructor; the underlying octet_iterator is constructed with its default constructor. explicit iterator (const octet_iterator& octet_it, const octet_iterator& range_start, const octet_iterator& range_end); a constructor that initializes the underlying octet_iterator with octet_it and sets the range in which the iterator is considered valid. octet_iterator base () const; returns the underlying octet_iterator. uint32_t operator * () const; decodes the utf-8 sequence the underlying octet_iterator is pointing to and returns the code point. bool operator == (const iterator& rhs) const; returns true if the two underlaying iterators are equal. bool operator != (const iterator& rhs) const; returns true if the two underlaying iterators are not equal. iterator& operator ++ (); the prefix increment - moves the iterator to the next UTF-8 encoded code point. iterator operator ++ (int); the postfix increment - moves the iterator to the next UTF-8 encoded code point and returns the current one. iterator& operator -- (); the prefix decrement - moves the iterator to the previous UTF-8 encoded code point. iterator operator -- (int); the postfix decrement - moves the iterator to the previous UTF-8 encoded code point and returns the current one.
Example of use:
char* threechars ="\xf0\x90\x8d\x86\xe6\x97\xa5\xd1\x88";
utf8::iterator<char*> it(threechars, threechars, threechars +9);
utf8::iterator<char*> it2 = it;
assert (it2 == it);
assert (*it ==0x10346);
assert (*(++it) ==0x65e5);
assert ((*it++) ==0x65e5);
assert (*it ==0x0448);
assert (it != it2);
utf8::iterator<char*> endit (threechars +9, threechars, threechars +9);
assert (++it == endit);
assert (*(--it) ==0x0448);
assert ((*it--) ==0x0448);
assert (*it ==0x65e5);
assert (--it == utf8::iterator<char*>(threechars, threechars, threechars +9));
assert (*it ==0x10346);
The purpose of utf8::iterator adapter is to enable easy iteration as well as the use of STL algorithms with UTF-8 encoded strings. Increment and decrement operators are implemented in terms of utf8::next() and utf8::prior() functions.
Note that utf8::iterator adapter is a checked iterator. It operates on the range specified in the constructor; any attempt to go out of that range will result in an exception. Even the comparison operators require both iterator object to be constructed against the same range - otherwise an exception is thrown. Typically, the range will be determined by sequence container functions begin and end, i.e.:
std::string s ="example";
utf8::iterator i (s.begin(), s.begin(), s.end());
Available in version 1.0 and later.
Encodes a 32 bit code point as a UTF-8 sequence of octets and appends the sequence to a UTF-8 string.
template<typenameoctet_iterator>
octet_iterator append(uint32_t cp, octet_iterator result);
cp: A 32 bit integer representing a code point to append to the sequence.
result: An output iterator to the place in the sequence where to append the code point.
Return value: An iterator pointing to the place after the newly appended sequence.
Example of use:
unsigned charu[5] = {0,0,0,0,0};unsigned char* end = unchecked::append(0x0448, u);
assert (u[0] ==0xd1&& u[1] ==0x88&& u[2] ==0&& u[3] ==0&& u[4] ==0);
This is a faster but less safe version of utf8::append. It does not check for validity of the supplied code point, and may produce an invalid UTF-8 sequence.
Available in version 1.0 and later.
Given the iterator to the beginning of a UTF-8 sequence, it returns the code point and moves the iterator to the next position.
template<typenameoctet_iterator>
uint32_t next(octet_iterator& it);
it: a reference to an iterator pointing to the beginning of an UTF-8 encoded code point. After the function returns, it is incremented to point to the beginning of the next code point.
Return value: the 32 bit representation of the processed UTF-8 code point.
Example of use:
char* twochars ="\xe6\x97\xa5\xd1\x88";char* w = twochars;intcp = unchecked::next(w);
assert (cp ==0x65e5);
assert (w == twochars +3);
This is a faster but less safe version of utf8::next. It does not check for validity of the supplied UTF-8 sequence.
Available in version 2.1 and later.
Given the iterator to the beginning of a UTF-8 sequence, it returns the code point.
template<typenameoctet_iterator>
uint32_t peek_next(octet_iterator it);
it: an iterator pointing to the beginning of an UTF-8 encoded code point.
Return value: the 32 bit representation of the processed UTF-8 code point.
Example of use:
char* twochars ="\xe6\x97\xa5\xd1\x88";char* w = twochars;intcp = unchecked::peek_next(w);
assert (cp ==0x65e5);
assert (w == twochars);
This is a faster but less safe version of utf8::peek_next. It does not check for validity of the supplied UTF-8 sequence.
Available in version 1.02 and later.
Given a reference to an iterator pointing to an octet in a UTF-8 seqence, it decreases the iterator until it hits the beginning of the previous UTF-8 encoded code point and returns the 32 bits representation of the code point.
template<typenameoctet_iterator>
uint32_t prior(octet_iterator& it);
it: a reference pointing to an octet within a UTF-8 encoded string. After the function returns, it is decremented to point to the beginning of the previous code point.
Return value: the 32 bit representation of the previous code point.
Example of use:
char* twochars ="\xe6\x97\xa5\xd1\x88";char* w = twochars +3;intcp = unchecked::prior (w);
assert (cp ==0x65e5);
assert (w == twochars);
This is a faster but less safe version of utf8::prior. It does not check for validity of the supplied UTF-8 sequence and offers no boundary checking.
Deprecated in version 1.02 and later.
Given a reference to an iterator pointing to an octet in a UTF-8 seqence, it decreases the iterator until it hits the beginning of the previous UTF-8 encoded code point and returns the 32 bits representation of the code point.
template<typenameoctet_iterator>
uint32_t previous(octet_iterator& it);
it: a reference pointing to an octet within a UTF-8 encoded string. After the function returns, it is decremented to point to the beginning of the previous code point.
Return value: the 32 bit representation of the previous code point.
Example of use:
char* twochars ="\xe6\x97\xa5\xd1\x88";char* w = twochars +3;intcp = unchecked::previous (w);
assert (cp ==0x65e5);
assert (w == twochars);
The reason this function is deprecated is just the consistency with the "checked" versions, where prior should be used instead of previous. In fact, unchecked::previous behaves exactly the same as unchecked::prior
This is a faster but less safe version of utf8::previous. It does not check for validity of the supplied UTF-8 sequence and offers no boundary checking.
Available in version 1.0 and later.
Advances an iterator by the specified number of code points within an UTF-8 sequence.
template<typenameoctet_iterator, typename distance_type>voidadvance (octet_iterator& it, distance_type n);
it: a reference to an iterator pointing to the beginning of an UTF-8 encoded code point. After the function returns, it is incremented to point to the nth following code point.
n: a positive integer that shows how many code points we want to advance.
Example of use:
char* twochars ="\xe6\x97\xa5\xd1\x88";char* w = twochars;
unchecked::advance (w,2);
assert (w == twochars +5);
This function works only "forward". In case of a negative n, there is no effect.
This is a faster but less safe version of utf8::advance. It does not check for validity of the supplied UTF-8 sequence and offers no boundary checking.
Available in version 1.0 and later.
Given the iterators to two UTF-8 encoded code points in a seqence, returns the number of code points between them.
template<typenameoctet_iterator>typenamestd::iterator_traits<octet_iterator>::difference_type distance (octet_iterator first, octet_iterator last);
first: an iterator to a beginning of a UTF-8 encoded code point.
last: an iterator to a "post-end" of the last UTF-8 encoded code point in the sequence we are trying to determine the length. It can be the beginning of a new code point, or not.
Return value the distance between the iterators, in code points.
Example of use:
char* twochars ="\xe6\x97\xa5\xd1\x88";
size_t dist = utf8::unchecked::distance(twochars, twochars +5);
assert (dist ==2);
This is a faster but less safe version of utf8::distance. It does not check for validity of the supplied UTF-8 sequence.
Available in version 1.0 and later.
Converts a UTF-16 encoded string to UTF-8.
template<typenameu16bit_iterator,typenameoctet_iterator>
octet_iterator utf16to8 (u16bit_iterator start, u16bit_iterator end, octet_iterator result);
start: an iterator pointing to the beginning of the UTF-16 encoded string to convert.
end: an iterator pointing to pass-the-end of the UTF-16 encoded string to convert.
result: an output iterator to the place in the UTF-8 string where to append the result of conversion.
Return value: An iterator pointing to the place after the appended UTF-8 string.
Example of use:
unsigned shortutf16string[] = {0x41,0x0448,0x65e5,0xd834,0xdd1e};
vector<unsigned char> utf8result;
unchecked::utf16to8(utf16string, utf16string +5, back_inserter(utf8result));
assert (utf8result.size() ==10);
This is a faster but less safe version of utf8::utf16to8. It does not check for validity of the supplied UTF-16 sequence.
Available in version 1.0 and later.
Converts an UTF-8 encoded string to UTF-16
template<typenameu16bit_iterator, typename octet_iterator>
u16bit_iterator utf8to16 (octet_iterator start, octet_iterator end, u16bit_iterator result);
start: an iterator pointing to the beginning of the UTF-8 encoded string to convert. < br /> end: an iterator pointing to pass-the-end of the UTF-8 encoded string to convert.
result: an output iterator to the place in the UTF-16 string where to append the result of conversion.
Return value: An iterator pointing to the place after the appended UTF-16 string.
Example of use:
charutf8_with_surrogates[] ="\xe6\x97\xa5\xd1\x88\xf0\x9d\x84\x9e";
vector <unsigned short> utf16result;
unchecked::utf8to16(utf8_with_surrogates, utf8_with_surrogates +9, back_inserter(utf16result));
assert (utf16result.size() ==4);
assert (utf16result[2] ==0xd834);
assert (utf16result[3] ==0xdd1e);
This is a faster but less safe version of utf8::utf8to16. It does not check for validity of the supplied UTF-8 sequence.
Available in version 1.0 and later.
Converts a UTF-32 encoded string to UTF-8.
template<typenameoctet_iterator,typenameu32bit_iterator>
octet_iterator utf32to8 (u32bit_iterator start, u32bit_iterator end, octet_iterator result);
start: an iterator pointing to the beginning of the UTF-32 encoded string to convert.
end: an iterator pointing to pass-the-end of the UTF-32 encoded string to convert.
result: an output iterator to the place in the UTF-8 string where to append the result of conversion.
Return value: An iterator pointing to the place after the appended UTF-8 string.
Example of use:
intutf32string[] = {0x448,0x65e5,0x10346,0};
vector<unsigned char> utf8result;
utf32to8(utf32string, utf32string +3, back_inserter(utf8result));
assert (utf8result.size() ==9);
This is a faster but less safe version of utf8::utf32to8. It does not check for validity of the supplied UTF-32 sequence.
Available in version 1.0 and later.
Converts a UTF-8 encoded string to UTF-32.
template<typenameoctet_iterator, typename u32bit_iterator>
u32bit_iterator utf8to32 (octet_iterator start, octet_iterator end, u32bit_iterator result);
start: an iterator pointing to the beginning of the UTF-8 encoded string to convert.
end: an iterator pointing to pass-the-end of the UTF-8 encoded string to convert.
result: an output iterator to the place in the UTF-32 string where to append the result of conversion.
Return value: An iterator pointing to the place after the appended UTF-32 string.
Example of use:
char* twochars ="\xe6\x97\xa5\xd1\x88";
vector<int> utf32result;
unchecked::utf8to32(twochars, twochars +5, back_inserter(utf32result));
assert (utf32result.size() ==2);
This is a faster but less safe version of utf8::utf8to32. It does not check for validity of the supplied UTF-8 sequence.
Available in version 2.0 and later.
Adapts the underlying octet iterator to iterate over the sequence of code points, rather than raw octets.
template<typenameoctet_iterator>classiterator;
iterator(); the deafult constructor; the underlying octet_iterator is constructed with its default constructor. explicit iterator (const octet_iterator& octet_it); a constructor that initializes the underlying octet_iterator with octet_it``octet_iterator base () const; returns the underlying octet_iterator. uint32_t operator * () const; decodes the utf-8 sequence the underlying octet_iterator is pointing to and returns the code point. bool operator == (const iterator& rhs) const; returns true if the two underlaying iterators are equal. bool operator != (const iterator& rhs) const; returns true if the two underlaying iterators are not equal. iterator& operator ++ (); the prefix increment - moves the iterator to the next UTF-8 encoded code point. iterator operator ++ (int); the postfix increment - moves the iterator to the next UTF-8 encoded code point and returns the current one. iterator& operator -- (); the prefix decrement - moves the iterator to the previous UTF-8 encoded code point. iterator operator -- (int); the postfix decrement - moves the iterator to the previous UTF-8 encoded code point and returns the current one.
Example of use:
char* threechars ="\xf0\x90\x8d\x86\xe6\x97\xa5\xd1\x88";
utf8::unchecked::iterator<char*> un_it(threechars);
utf8::unchecked::iterator<char*> un_it2 = un_it;
assert (un_it2 == un_it);
assert (*un_it ==0x10346);
assert (*(++un_it) ==0x65e5);
assert ((*un_it++) ==0x65e5);
assert (*un_it ==0x0448);
assert (un_it != un_it2);
utf8::::unchecked::iterator<char*> un_endit (threechars +9);
assert (++un_it == un_endit);
assert (*(--un_it) ==0x0448);
assert ((*un_it--) ==0x0448);
assert (*un_it ==0x65e5);
assert (--un_it == utf8::unchecked::iterator<char*>(threechars));
assert (*un_it ==0x10346);
This is an unchecked version of utf8::iterator. It is faster in many cases, but offers no validity or range checks.
The library was designed to be:
In case you want to look into other means of working with UTF-8 strings from C++, here is the list of solutions I am aware of:
std::string. If you prefer to have yet another string class in your code, it may be worth a look. Be aware of the licensing issues, though.