docs/content/docs/dev/datastream/fault-tolerance/checkpointing.md
Every function and operator in Flink can be stateful (see [working with state]({{< ref "docs/concepts/stateful-stream-processing" >}}) for details). Stateful functions store data across the processing of individual elements/events, making state a critical building block for any type of more elaborate operation.
In order to make state fault tolerant, Flink needs to checkpoint the state. Checkpoints allow Flink to recover state and positions in the streams to give the application the same semantics as a failure-free execution.
The [documentation on streaming fault tolerance]({{< ref "docs/learn-flink/fault_tolerance" >}}) describes in detail the technique behind Flink's streaming fault tolerance mechanism.
Flink's checkpointing mechanism interacts with durable storage for streams and state. In general, it requires:
By default, checkpointing is disabled. To enable checkpointing, call enableCheckpointing(n) on the StreamExecutionEnvironment, where n is the [checkpoint interval]({{< ref "docs/ops/production_ready#choose-the-right-checkpoint-interval" >}}) in milliseconds.
Other parameters for checkpointing include:
checkpoint storage: You can set the location where checkpoint snapshots are made durable. By default Flink will use the JobManager's heap. For production deployments it is recommended to instead use a durable filesystem. See [checkpoint storage]({{< ref "docs/ops/state/checkpoints#checkpoint-storage" >}}) for more details on the available options for job-wide and cluster-wide configuration.
exactly-once vs. at-least-once: You can optionally pass a mode to the enableCheckpointing(n) method to choose between the two guarantee levels.
Exactly-once is preferable for most applications. At-least-once may be relevant for certain super-low-latency (consistently few milliseconds) applications.
checkpoint timeout: The time after which a checkpoint-in-progress is aborted, if it did not complete by then.
minimum time between checkpoints: To make sure that the streaming application makes a certain amount of progress between checkpoints, one can define how much time needs to pass between checkpoints. If this value is set for example to 5000, the next checkpoint will be started no sooner than 5 seconds after the previous checkpoint completed, regardless of the checkpoint duration and the checkpoint interval. Note that this implies that the checkpoint interval will never be smaller than this parameter.
It is often easier to configure applications by defining the "time between checkpoints" than the checkpoint interval, because the "time between checkpoints" is not susceptible to the fact that checkpoints may sometimes take longer than on average (for example if the target storage system is temporarily slow).
Note that this value also implies that the number of concurrent checkpoints is one.
tolerable checkpoint failure number: This defines how many consecutive checkpoint failures will
be tolerated, before the whole job is failed over. The default value is 0, which means no
checkpoint failures will be tolerated, and the job will fail on first reported checkpoint failure.
This only applies to the following failure reasons: IOException on the Job Manager, failures in
the async phase on the Task Managers and checkpoint expiration due to a timeout. Failures
originating from the sync phase on the Task Managers are always forcing failover of an affected
task. Other types of checkpoint failures (such as checkpoint being subsumed) are being ignored.
number of concurrent checkpoints: By default, the system will not trigger another checkpoint while one is still in progress. This ensures that the topology does not spend too much time on checkpoints and not make progress with processing the streams. It is possible to allow for multiple overlapping checkpoints, which is interesting for pipelines that have a certain processing delay (for example because the functions call external services that need some time to respond) but that still want to do very frequent checkpoints (100s of milliseconds) to re-process very little upon failures.
This option cannot be used when a minimum time between checkpoints is defined.
externalized checkpoints: You can configure periodic checkpoints to be persisted externally. Externalized checkpoints write their meta data out to persistent storage and are not automatically cleaned up when the job fails. This way, you will have a checkpoint around to resume from if your job fails. There are more details in the [deployment notes on externalized checkpoints]({{< ref "docs/ops/state/checkpoints" >}}#retained-checkpoints).
unaligned checkpoints: You can enable [unaligned checkpoints]({{< ref "docs/ops/state/checkpointing_under_backpressure" >}}#unaligned-checkpoints) to greatly reduce checkpointing times under backpressure. This only works for exactly-once checkpoints and with one concurrent checkpoint.
checkpoints with finished tasks: By default Flink will continue performing checkpoints even if parts of the DAG have finished processing all of their records. Please refer to important considerations for details.
{{< tabs "4b9c6a74-8a45-4ad2-9e80-52fe44a85991" >}} {{< tab "Java" >}}
StreamExecutionEnvironment env = StreamExecutionEnvironment.getExecutionEnvironment();
// start a checkpoint every 1000 ms
env.enableCheckpointing(1000);
// advanced options:
// set mode to exactly-once (this is the default)
env.getCheckpointConfig().setCheckpointingMode(CheckpointingMode.EXACTLY_ONCE);
// make sure 500 ms of progress happen between checkpoints
env.getCheckpointConfig().setMinPauseBetweenCheckpoints(500);
// checkpoints have to complete within one minute, or are discarded
env.getCheckpointConfig().setCheckpointTimeout(60000);
// only two consecutive checkpoint failures are tolerated
env.getCheckpointConfig().setTolerableCheckpointFailureNumber(2);
// allow only one checkpoint to be in progress at the same time
env.getCheckpointConfig().setMaxConcurrentCheckpoints(1);
// enable externalized checkpoints which are retained
// after job cancellation
env.getCheckpointConfig().setExternalizedCheckpointRetention(
ExternalizedCheckpointRetention.RETAIN_ON_CANCELLATION);
// enables the unaligned checkpoints
env.getCheckpointConfig().enableUnalignedCheckpoints();
// sets the checkpoint storage where checkpoint snapshots will be written
Configuration config = new Configuration();
config.set(CheckpointingOptions.CHECKPOINT_STORAGE, "filesystem");
config.set(CheckpointingOptions.CHECKPOINTS_DIRECTORY, "hdfs:///my/checkpoint/dir");
env.configure(config);
// enable checkpointing with finished tasks
Configuration config = new Configuration();
config.set(CheckpointingOptions.ENABLE_CHECKPOINTS_AFTER_TASKS_FINISH, true);
env.configure(config);
{{< /tab >}} {{< tab "Python" >}}
env = StreamExecutionEnvironment.get_execution_environment()
# start a checkpoint every 1000 ms
env.enable_checkpointing(1000)
# advanced options:
# set mode to exactly-once (this is the default)
env.get_checkpoint_config().set_checkpointing_mode(CheckpointingMode.EXACTLY_ONCE)
# make sure 500 ms of progress happen between checkpoints
env.get_checkpoint_config().set_min_pause_between_checkpoints(500)
# checkpoints have to complete within one minute, or are discarded
env.get_checkpoint_config().set_checkpoint_timeout(60000)
# only two consecutive checkpoint failures are tolerated
env.get_checkpoint_config().set_tolerable_checkpoint_failure_number(2)
# allow only one checkpoint to be in progress at the same time
env.get_checkpoint_config().set_max_concurrent_checkpoints(1)
# enable externalized checkpoints which are retained after job cancellation
env.get_checkpoint_config().set_externalized_checkpoint_retention(ExternalizedCheckpointRetention.RETAIN_ON_CANCELLATION)
# enables the unaligned checkpoints
env.get_checkpoint_config().enable_unaligned_checkpoints()
{{< /tab >}} {{< /tabs >}}
Some more parameters and/or defaults may be set via Flink configuration file (see [configuration]({{< ref "docs/deployment/config" >}}) for a full guide):
{{< generated/checkpointing_configuration >}}
{{< top >}}
Flink's [checkpointing mechanism]({{< ref "docs/learn-flink/fault_tolerance" >}}) stores consistent snapshots of all the state in timers and stateful operators, including connectors, windows, and any [user-defined state]({{< ref "docs/dev/datastream/fault-tolerance/state" >}}). Where the checkpoints are stored (e.g., JobManager memory, file system, database) depends on the configured Checkpoint Storage.
By default, checkpoints are stored in memory in the JobManager. For proper persistence of large state, Flink supports various approaches for checkpointing state in other locations. The choice of checkpoint storage can be configured like the following code snippet.
Configuration config = new Configuration();
config.set(CheckpointingOptions.CHECKPOINT_STORAGE, "filesystem");
config.set(CheckpointingOptions.CHECKPOINTS_DIRECTORY, "...");
env.configure(config);
It is strongly encouraged that checkpoints be stored in a highly-available filesystem for production deployments.
See [checkpoint storage]({{< ref "docs/ops/state/checkpoints#checkpoint-storage" >}}) for more details on the available options for job-wide and cluster-wide configuration.
Flink currently only provides processing guarantees for jobs without iterations. Enabling checkpointing on an iterative job causes an exception. In order to force checkpointing on an iterative program the user needs to set a special flag when enabling checkpointing: env.enableCheckpointing(interval, CheckpointingMode.EXACTLY_ONCE, force = true).
Please note that records in flight in the loop edges (and the state changes associated with them) will be lost during failure.
Starting from Flink 1.14 it is possible to continue performing checkpoints even if parts of the job graph have finished processing all data, which might happen if it contains bounded sources. This feature is enabled by default since 1.15, and it could be disabled via a feature flag:
Configuration config = new Configuration();
config.set(CheckpointingOptions.ENABLE_CHECKPOINTS_AFTER_TASKS_FINISH, false);
StreamExecutionEnvironment env = StreamExecutionEnvironment.getExecutionEnvironment(config);
Once the tasks/subtasks are finished, they do not contribute to the checkpoints any longer. This is an important consideration when implementing any custom operators or UDFs (User-Defined Functions).
In order to support checkpointing with tasks that finished, we adjusted the [task lifecycle]({{<ref "docs/internals/task_lifecycle" >}})
and introduced the {{< javadoc file="org/apache/flink/streaming/api/operators/StreamOperator.html#finish--" name="StreamOperator#finish" >}} method.
This method is expected to be a clear cutoff point for flushing
any remaining buffered state. All checkpoints taken after the finish method has been called should
be empty (in most cases) and should not contain any buffered data since there will be no way to emit
this data. One notable exception is if your operator has some pointers to transactions in external
systems (i.e. order to implement the exactly-once semantic). In such a case, checkpoints taken after
invoking the finish() method should keep a pointer to the last transaction(s) that will be committed
in the final checkpoint before the operator is closed. A good built-in example of this are
exactly-once sinks and the TwoPhaseCommitSinkFunction.
There is a special handling for UnionListState, which has often been used to implement a global
view over offsets in an external system (i.e. storing current offsets of Kafka partitions). If we
had discarded a state for a single subtask that had its close method called, we would have lost
the offsets for partitions that it had been assigned. In order to work around this problem, we let
checkpoints succeed only if none or all subtasks that use UnionListState are finished.
We have not seen ListState used in a similar way, but you should be aware that any state
checkpointed after the close method will be discarded and not be available after a restore.
Any operator that is prepared to be rescaled should work well with tasks that partially finish. Restoring from a checkpoint where only a subset of tasks finished is equivalent to restoring such a task with the number of new subtasks equal to the number of running tasks.
To ensure all the records could be committed for operators using the two-phase commit, the tasks would wait for the final checkpoint completed successfully after all the operators finished. The final checkpoint would be triggered immediately after all operators have reached end of data, without waiting for periodic triggering, but the job will need to wait for this final checkpoint to be completed.
The unified file merging mechanism for checkpointing is introduced to Flink 1.20 as an MVP ("minimum viable product") feature,
which allows scattered small checkpoint files to be written into larger files, reducing the number of file creations
and file deletions, which alleviates the pressure of file system metadata management raised by the file flooding problem during checkpoints.
The mechanism can be enabled by setting execution.checkpointing.file-merging.enabled to true.
Note that as a trade-off, enabling this mechanism may lead to space amplification, that is, the actual occupation on the file system
will be larger than actual state size. execution.checkpointing.file-merging.max-space-amplification
can be used to limit the upper bound of space amplification.
This mechanism is applicable to keyed state, operator state and channel state in Flink. Merging at subtask level is
provided for shared scope state; Merging at TaskManager level is provided for private scope state. The maximum number of subtasks
allowed to be written to a single file can be configured through the execution.checkpointing.file-merging.max-subtasks-per-file option.
This feature also supports merging files across checkpoints. To enable this, set
execution.checkpointing.file-merging.across-checkpoint-boundary to true.
This mechanism introduces a file pool to handle concurrent writing scenarios. There are two modes, the non-blocking mode will
always provide usable physical file without blocking when receive a file request, it may create many physical files if poll
file frequently; while the blocking mode will be blocked until there are returned files available in the file pool. This can be configured via
setting execution.checkpointing.file-merging.pool-blocking as true for blocking or false for non-blocking.
{{< top >}}