:mod:`!socket` --- Low-level networking interface

.. module:: socket :synopsis: Low-level networking interface.

Source code: :source:Lib/socket.py

This module provides access to the BSD socket interface. It is available on all modern Unix systems, Windows, MacOS, and probably additional platforms.

.. note::

Some behavior may be platform dependent, since calls are made to the operating system socket APIs.

.. include:: ../includes/wasm-notavail.rst

.. index:: pair: object; socket

The Python interface is a straightforward transliteration of the Unix system call and library interface for sockets to Python's object-oriented style: the :func:~socket.socket function returns a :dfn:socket object whose methods implement the various socket system calls. Parameter types are somewhat higher-level than in the C interface: as with :meth:read and :meth:write operations on Python files, buffer allocation on receive operations is automatic, and buffer length is implicit on send operations.

.. seealso::

Module :mod:socketserver Classes that simplify writing network servers.

Module :mod:ssl A TLS/SSL wrapper for socket objects.

.. _socket-addresses:

Socket families

Depending on the system and the build options, various socket families are supported by this module.

The address format required by a particular socket object is automatically selected based on the address family specified when the socket object was created. Socket addresses are represented as follows:

The address of an :const:AF_UNIX socket bound to a file system node is represented as a string, using the file system encoding and the 'surrogateescape' error handler (see :pep:383). An address in Linux's abstract namespace is returned as a :term:bytes-like object with an initial null byte; note that sockets in this namespace can communicate with normal file system sockets, so programs intended to run on Linux may need to deal with both types of address. A string or bytes-like object can be used for either type of address when passing it as an argument.

.. versionchanged:: 3.3 Previously, :const:AF_UNIX socket paths were assumed to use UTF-8 encoding.

.. versionchanged:: 3.5 Writable :term:bytes-like object is now accepted.

.. _host_port:

A pair (host, port) is used for the :const:AF_INET address family, where host is a string representing either a hostname in internet domain notation like 'daring.cwi.nl' or an IPv4 address like '100.50.200.5', and port is an integer.
- For IPv4 addresses, two special forms are accepted instead of a host address: '' represents :const:INADDR_ANY, which is used to bind to all interfaces, and the string '<broadcast>' represents :const:INADDR_BROADCAST. This behavior is not compatible with IPv6, therefore, you may want to avoid these if you intend to support IPv6 with your Python programs.
For :const:AF_INET6 address family, a four-tuple (host, port, flowinfo, scope_id) is used, where flowinfo and scope_id represent the sin6_flowinfo and sin6_scope_id members in :const:struct sockaddr_in6 in C. For :mod:!socket module methods, flowinfo and scope_id can be omitted just for backward compatibility. Note, however, omission of scope_id can cause problems in manipulating scoped IPv6 addresses.

.. versionchanged:: 3.7 For multicast addresses (with scope_id meaningful) address may not contain %scope_id (or zone id) part. This information is superfluous and may be safely omitted (recommended).
:const:AF_NETLINK sockets are represented as pairs (pid, groups).
Linux-only support for TIPC is available using the :const:AF_TIPC address family. TIPC is an open, non-IP based networked protocol designed for use in clustered computer environments. Addresses are represented by a tuple, and the fields depend on the address type. The general tuple form is (addr_type, v1, v2, v3 [, scope]), where:
- addr_type is one of :const:TIPC_ADDR_NAMESEQ, :const:TIPC_ADDR_NAME, or :const:TIPC_ADDR_ID.
- scope is one of :const:TIPC_ZONE_SCOPE, :const:TIPC_CLUSTER_SCOPE, and :const:TIPC_NODE_SCOPE.
- If addr_type is :const:TIPC_ADDR_NAME, then v1 is the server type, v2 is the port identifier, and v3 should be 0.
  
  If addr_type is :const:TIPC_ADDR_NAMESEQ, then v1 is the server type, v2 is the lower port number, and v3 is the upper port number.
  
  If addr_type is :const:TIPC_ADDR_ID, then v1 is the node, v2 is the reference, and v3 should be set to 0.
A tuple (interface, ) is used for the :const:AF_CAN address family, where interface is a string representing a network interface name like 'can0'. The network interface name '' can be used to receive packets from all network interfaces of this family.
- :const:CAN_ISOTP protocol requires a tuple (interface, rx_addr, tx_addr) where both additional parameters are unsigned long integer that represent a CAN identifier (standard or extended).
- :const:CAN_J1939 protocol requires a tuple (interface, name, pgn, addr) where additional parameters are 64-bit unsigned integer representing the ECU name, a 32-bit unsigned integer representing the Parameter Group Number (PGN), and an 8-bit integer representing the address.
A string or a tuple (id, unit) is used for the :const:SYSPROTO_CONTROL protocol of the :const:PF_SYSTEM family. The string is the name of a kernel control using a dynamically assigned ID. The tuple can be used if ID and unit number of the kernel control are known or if a registered ID is used.

.. versionadded:: 3.3
:const:AF_BLUETOOTH supports the following protocols and address formats:
- :const:BTPROTO_L2CAP accepts a tuple (bdaddr, psm[, cid[, bdaddr_type]]) where:
  - bdaddr is a string specifying the Bluetooth address.
  - psm is an integer specifying the Protocol/Service Multiplexer.
  - cid is an optional integer specifying the Channel Identifier. If not given, defaults to zero.
  - bdaddr_type is an optional integer specifying the address type; one of :const:BDADDR_BREDR (default), :const:BDADDR_LE_PUBLIC, :const:BDADDR_LE_RANDOM.
  .. versionchanged:: 3.14 Added cid and bdaddr_type fields.
- :const:BTPROTO_RFCOMM accepts (bdaddr, channel) where bdaddr is the Bluetooth address as a string and channel is an integer.
- :const:BTPROTO_HCI accepts a format that depends on your OS.
  - On Linux it accepts an integer device_id or a tuple (device_id, [channel]) where device_id specifies the number of the Bluetooth device, and channel is an optional integer specifying the HCI channel (:const:HCI_CHANNEL_RAW by default).
  - On FreeBSD, NetBSD and DragonFly BSD it accepts bdaddr where bdaddr is the Bluetooth address as a string.
  .. versionchanged:: 3.2 NetBSD and DragonFlyBSD support added.
  
  .. versionchanged:: 3.13.3 FreeBSD support added.
  
  .. versionchanged:: 3.14 Added channel field. device_id not packed in a tuple is now accepted.
- :const:BTPROTO_SCO accepts bdaddr where bdaddr is the Bluetooth address as a string or a :class:bytes object. (ex. '12:23:34:45:56:67' or b'12:23:34:45:56:67')
  
  .. versionchanged:: 3.14 FreeBSD support added.
:const:AF_ALG is a Linux-only socket based interface to Kernel cryptography. An algorithm socket is configured with a tuple of two to four elements (type, name [, feat [, mask]]), where:
- type is the algorithm type as string, e.g. aead, hash, skcipher or rng.
- name is the algorithm name and operation mode as string, e.g. sha256, hmac(sha256), cbc(aes) or drbg_nopr_ctr_aes256.
- feat and mask are unsigned 32bit integers.
.. availability:: Linux >= 2.6.38.

Some algorithm types require more recent Kernels.

.. versionadded:: 3.6
:const:AF_VSOCK allows communication between virtual machines and their hosts. The sockets are represented as a (CID, port) tuple where the context ID or CID and port are integers.

.. availability:: Linux >= 3.9

See :manpage:vsock(7)

.. versionadded:: 3.7
:const:AF_PACKET is a low-level interface directly to network devices. The addresses are represented by the tuple (ifname, proto[, pkttype[, hatype[, addr]]]) where:
- ifname - String specifying the device name.
- proto - The Ethernet protocol number. May be :data:ETH_P_ALL to capture all protocols, one of the :ref:ETHERTYPE_* constants <socket-ethernet-types> or any other Ethernet protocol number.
- pkttype - Optional integer specifying the packet type:
  - PACKET_HOST (the default) - Packet addressed to the local host.
  - PACKET_BROADCAST - Physical-layer broadcast packet.
  - PACKET_MULTICAST - Packet sent to a physical-layer multicast address.
  - PACKET_OTHERHOST - Packet to some other host that has been caught by a device driver in promiscuous mode.
  - PACKET_OUTGOING - Packet originating from the local host that is looped back to a packet socket.
- hatype - Optional integer specifying the ARP hardware address type.
- addr - Optional bytes-like object specifying the hardware physical address, whose interpretation depends on the device.
.. availability:: Linux >= 2.2.
:const:AF_QIPCRTR is a Linux-only socket based interface for communicating with services running on co-processors in Qualcomm platforms. The address family is represented as a (node, port) tuple where the node and port are non-negative integers.

.. availability:: Linux >= 4.7.

.. versionadded:: 3.8
:const:IPPROTO_UDPLITE is a variant of UDP which allows you to specify what portion of a packet is covered with the checksum. It adds two socket options that you can change. self.setsockopt(IPPROTO_UDPLITE, UDPLITE_SEND_CSCOV, length) will change what portion of outgoing packets are covered by the checksum and self.setsockopt(IPPROTO_UDPLITE, UDPLITE_RECV_CSCOV, length) will filter out packets which cover too little of their data. In both cases length should be in range(8, 2**16, 8).

Such a socket should be constructed with socket(AF_INET, SOCK_DGRAM, IPPROTO_UDPLITE) for IPv4 or socket(AF_INET6, SOCK_DGRAM, IPPROTO_UDPLITE) for IPv6.

.. availability:: Linux >= 2.6.20, FreeBSD >= 10.1

.. versionadded:: 3.9
:const:AF_HYPERV is a Windows-only socket based interface for communicating with Hyper-V hosts and guests. The address family is represented as a (vm_id, service_id) tuple where the vm_id and service_id are UUID strings.

The vm_id is the virtual machine identifier or a set of known VMID values if the target is not a specific virtual machine. Known VMID constants defined on socket are:
- HV_GUID_ZERO
- HV_GUID_BROADCAST
- HV_GUID_WILDCARD - Used to bind on itself and accept connections from all partitions.
- HV_GUID_CHILDREN - Used to bind on itself and accept connection from child partitions.
- HV_GUID_LOOPBACK - Used as a target to itself.
- HV_GUID_PARENT - When used as a bind accepts connection from the parent partition. When used as an address target it will connect to the parent partition.
The service_id is the service identifier of the registered service.

.. versionadded:: 3.12

If you use a hostname in the host portion of IPv4/v6 socket address, the program may show a nondeterministic behavior, as Python uses the first address returned from the DNS resolution. The socket address will be resolved differently into an actual IPv4/v6 address, depending on the results from DNS resolution and/or the host configuration. For deterministic behavior use a numeric address in host portion.

All errors raise exceptions. The normal exceptions for invalid argument types and out-of-memory conditions can be raised. Errors related to socket or address semantics raise :exc:OSError or one of its subclasses.

Non-blocking mode is supported through :meth:~socket.setblocking. A generalization of this based on timeouts is supported through :meth:~socket.settimeout.

Module contents

The module :mod:!socket exports the following elements.

Exceptions ^^^^^^^^^^

.. exception:: error

A deprecated alias of :exc:OSError.

.. versionchanged:: 3.3 Following :pep:3151, this class was made an alias of :exc:OSError.

.. exception:: herror

A subclass of :exc:OSError, this exception is raised for address-related errors, i.e. for functions that use h_errno in the POSIX C API, including :func:gethostbyname_ex and :func:gethostbyaddr. The accompanying value is a pair (h_errno, string) representing an error returned by a library call. h_errno is a numeric value, while string represents the description of h_errno, as returned by the :c:func:hstrerror C function.

.. versionchanged:: 3.3 This class was made a subclass of :exc:OSError.

.. exception:: gaierror

A subclass of :exc:OSError, this exception is raised for address-related errors by :func:getaddrinfo and :func:getnameinfo. The accompanying value is a pair (error, string) representing an error returned by a library call. string represents the description of error, as returned by the :c:func:gai_strerror C function. The numeric error value will match one of the :const:!EAI_\* constants defined in this module.

.. versionchanged:: 3.3 This class was made a subclass of :exc:OSError.

.. exception:: timeout

A deprecated alias of :exc:TimeoutError.

A subclass of :exc:OSError, this exception is raised when a timeout occurs on a socket which has had timeouts enabled via a prior call to :meth:~socket.settimeout (or implicitly through :func:~socket.setdefaulttimeout). The accompanying value is a string whose value is currently always "timed out".

.. versionchanged:: 3.3 This class was made a subclass of :exc:OSError.

.. versionchanged:: 3.10 This class was made an alias of :exc:TimeoutError.

Constants ^^^^^^^^^

The AF_* and SOCK_* constants are now :class:AddressFamily and :class:SocketKind :class:.IntEnum collections.

.. versionadded:: 3.4

.. data:: AF_UNIX AF_INET AF_INET6

These constants represent the address (and protocol) families, used for the first argument to :func:~socket.socket. If the :const:AF_UNIX constant is not defined then this protocol is unsupported. More constants may be available depending on the system.

.. data:: AF_UNSPEC

:const:AF_UNSPEC means that :func:getaddrinfo should return socket addresses for any address family (either IPv4, IPv6, or any other) that can be used.

.. data:: SOCK_STREAM SOCK_DGRAM SOCK_RAW SOCK_RDM SOCK_SEQPACKET

These constants represent the socket types, used for the second argument to :func:~socket.socket. More constants may be available depending on the system. (Only :const:SOCK_STREAM and :const:SOCK_DGRAM appear to be generally useful.)

.. data:: SOCK_CLOEXEC SOCK_NONBLOCK

These two constants, if defined, can be combined with the socket types and allow you to set some flags atomically (thus avoiding possible race conditions and the need for separate calls).

.. seealso::

  `Secure File Descriptor Handling <https://udrepper.livejournal.com/20407.html>`_
  for a more thorough explanation.

.. availability:: Linux >= 2.6.27.

.. versionadded:: 3.2

.. _socket-unix-constants:

.. data:: SO_* SOMAXCONN MSG_* SOL_* SCM_* IPPROTO_* IPPORT_* INADDR_* IP_* IPV6_* EAI_* AI_* NI_* TCP_*

Many constants of these forms, documented in the Unix documentation on sockets and/or the IP protocol, are also defined in the socket module. They are generally used in arguments to the :meth:~socket.setsockopt and :meth:~socket.getsockopt methods of socket objects. In most cases, only those symbols that are defined in the Unix header files are defined; for a few symbols, default values are provided.

.. versionchanged:: 3.6 SO_DOMAIN, SO_PROTOCOL, SO_PEERSEC, SO_PASSSEC, TCP_USER_TIMEOUT, TCP_CONGESTION were added.

.. versionchanged:: 3.6.5 Added support for TCP_FASTOPEN, TCP_KEEPCNT on Windows platforms when available.

.. versionchanged:: 3.7 TCP_NOTSENT_LOWAT was added.

  Added support for ``TCP_KEEPIDLE``, ``TCP_KEEPINTVL`` on Windows platforms
  when available.

.. versionchanged:: 3.10 IP_RECVTOS was added. Added TCP_KEEPALIVE. On MacOS this constant can be used in the same way that TCP_KEEPIDLE is used on Linux.

.. versionchanged:: 3.11 Added TCP_CONNECTION_INFO. On MacOS this constant can be used in the same way that TCP_INFO is used on Linux and BSD.

.. versionchanged:: 3.12 Added SO_RTABLE and SO_USER_COOKIE. On OpenBSD and FreeBSD respectively those constants can be used in the same way that SO_MARK is used on Linux. Also added missing TCP socket options from Linux: TCP_MD5SIG, TCP_THIN_LINEAR_TIMEOUTS, TCP_THIN_DUPACK, TCP_REPAIR, TCP_REPAIR_QUEUE, TCP_QUEUE_SEQ, TCP_REPAIR_OPTIONS, TCP_TIMESTAMP, TCP_CC_INFO, TCP_SAVE_SYN, TCP_SAVED_SYN, TCP_REPAIR_WINDOW, TCP_FASTOPEN_CONNECT, TCP_ULP, TCP_MD5SIG_EXT, TCP_FASTOPEN_KEY, TCP_FASTOPEN_NO_COOKIE, TCP_ZEROCOPY_RECEIVE, TCP_INQ, TCP_TX_DELAY. Added IP_PKTINFO, IP_UNBLOCK_SOURCE, IP_BLOCK_SOURCE, IP_ADD_SOURCE_MEMBERSHIP, IP_DROP_SOURCE_MEMBERSHIP.

.. versionchanged:: 3.13 Added SO_BINDTOIFINDEX. On Linux this constant can be used in the same way that SO_BINDTODEVICE is used, but with the index of a network interface instead of its name.

.. versionchanged:: 3.14 Added missing IP_FREEBIND, IP_RECVERR, IPV6_RECVERR, IP_RECVTTL, and IP_RECVORIGDSTADDR on Linux.

.. versionchanged:: 3.14 Added support for TCP_QUICKACK on Windows platforms when available.

.. versionchanged:: 3.15 IPV6_HDRINCL was added.

.. data:: AF_CAN PF_CAN SOL_CAN_* CAN_*

Many constants of these forms, documented in the Linux documentation, are also defined in the socket module.

.. availability:: Linux >= 2.6.25, NetBSD >= 8.

.. versionadded:: 3.3

.. versionchanged:: 3.11 NetBSD support was added.

.. versionchanged:: 3.14 Restored missing CAN_RAW_ERR_FILTER on Linux.

.. data:: CAN_BCM CAN_BCM_*

CAN_BCM, in the CAN protocol family, is the broadcast manager (BCM) protocol. Broadcast manager constants, documented in the Linux documentation, are also defined in the socket module.

.. availability:: Linux >= 2.6.25.

.. note:: The :data:CAN_BCM_CAN_FD_FRAME flag is only available on Linux >= 4.8.

.. versionadded:: 3.4

.. data:: CAN_RAW_FD_FRAMES

Enables CAN FD support in a CAN_RAW socket. This is disabled by default. This allows your application to send both CAN and CAN FD frames; however, you must accept both CAN and CAN FD frames when reading from the socket.

This constant is documented in the Linux documentation.

.. availability:: Linux >= 3.6.

.. versionadded:: 3.5

.. data:: CAN_RAW_JOIN_FILTERS

Joins the applied CAN filters such that only CAN frames that match all given CAN filters are passed to user space.

This constant is documented in the Linux documentation.

.. availability:: Linux >= 4.1.

.. versionadded:: 3.9

.. data:: CAN_ISOTP

CAN_ISOTP, in the CAN protocol family, is the ISO-TP (ISO 15765-2) protocol. ISO-TP constants, documented in the Linux documentation.

.. availability:: Linux >= 2.6.25.

.. versionadded:: 3.7

.. data:: CAN_J1939

CAN_J1939, in the CAN protocol family, is the SAE J1939 protocol. J1939 constants, documented in the Linux documentation.

.. availability:: Linux >= 5.4.

.. versionadded:: 3.9

.. data:: AF_DIVERT PF_DIVERT

These two constants, documented in the FreeBSD divert(4) manual page, are also defined in the socket module.

.. availability:: FreeBSD >= 14.0.

.. versionadded:: 3.12

.. data:: AF_PACKET PF_PACKET PACKET_*

Many constants of these forms, documented in the Linux documentation, are also defined in the socket module.

.. availability:: Linux >= 2.2.

.. data:: ETH_P_ALL

:data:!ETH_P_ALL can be used in the :class:~socket.socket constructor as proto for the :const:AF_PACKET family in order to capture every packet, regardless of protocol.

For more information, see the :manpage:packet(7) manpage.

.. availability:: Linux.

.. versionadded:: 3.12

.. data:: AF_RDS PF_RDS SOL_RDS RDS_*

Many constants of these forms, documented in the Linux documentation, are also defined in the socket module.

.. availability:: Linux >= 2.6.30.

.. versionadded:: 3.3

.. data:: SIO_RCVALL SIO_KEEPALIVE_VALS SIO_LOOPBACK_FAST_PATH RCVALL_*

Constants for Windows' WSAIoctl(). The constants are used as arguments to the :meth:~socket.socket.ioctl method of socket objects.

.. versionchanged:: 3.6 SIO_LOOPBACK_FAST_PATH was added.

.. data:: TIPC_*

TIPC related constants, matching the ones exported by the C socket API. See the TIPC documentation for more information.

.. data:: AF_ALG SOL_ALG ALG_*

Constants for Linux Kernel cryptography.

.. availability:: Linux >= 2.6.38.

.. versionadded:: 3.6

.. data:: AF_VSOCK IOCTL_VM_SOCKETS_GET_LOCAL_CID VMADDR* SO_VM*

Constants for Linux host/guest communication.

.. availability:: Linux >= 4.8.

.. versionadded:: 3.7

.. data:: AF_LINK

.. availability:: BSD, macOS.

.. versionadded:: 3.4

.. data:: has_ipv6

This constant contains a boolean value which indicates if IPv6 is supported on this platform.

.. data:: AF_BLUETOOTH BTPROTO_L2CAP BTPROTO_RFCOMM BTPROTO_HCI BTPROTO_SCO

Integer constants for use with Bluetooth addresses.

.. data:: BDADDR_ANY BDADDR_LOCAL

These are string constants containing Bluetooth addresses with special meanings. For example, :const:BDADDR_ANY can be used to indicate any address when specifying the binding socket with :const:BTPROTO_RFCOMM.

.. data:: BDADDR_BREDR BDADDR_LE_PUBLIC BDADDR_LE_RANDOM

These constants describe the Bluetooth address type when binding or connecting a :const:BTPROTO_L2CAP socket.

.. availability:: Linux, FreeBSD

.. versionadded:: 3.14

.. data:: SOL_RFCOMM SOL_L2CAP SOL_HCI SOL_SCO SOL_BLUETOOTH

Used in the level argument to the :meth:~socket.setsockopt and :meth:~socket.getsockopt methods of Bluetooth socket objects.

:const:SOL_BLUETOOTH is only available on Linux. Other constants are available if the corresponding protocol is supported.

.. data:: SO_L2CAP_* L2CAP_LM L2CAP_LM_* SO_RFCOMM_* RFCOMM_LM_* SO_SCO_* SO_BTH_* BT_*

Used in the option name and value argument to the :meth:~socket.setsockopt and :meth:~socket.getsockopt methods of Bluetooth socket objects.

:const:!BT_* and :const:L2CAP_LM are only available on Linux. :const:!SO_BTH_* are only available on Windows. Other constants may be available on Linux and various BSD platforms.

.. versionadded:: 3.14

.. data:: HCI_FILTER HCI_TIME_STAMP HCI_DATA_DIR SO_HCI_EVT_FILTER SO_HCI_PKT_FILTER

Option names for use with :const:BTPROTO_HCI. Availability and format of the option values depend on platform.

.. versionchanged:: 3.14 Added :const:!SO_HCI_EVT_FILTER and :const:!SO_HCI_PKT_FILTER on NetBSD and DragonFly BSD. Added :const:!HCI_DATA_DIR on FreeBSD, NetBSD and DragonFly BSD.

.. data:: HCI_DEV_NONE

The device_id value used to create an HCI socket that isn't specific to a single Bluetooth adapter.

.. availability:: Linux

.. versionadded:: 3.14

.. data:: HCI_CHANNEL_RAW HCI_CHANNEL_USER HCI_CHANNEL_MONITOR HCI_CHANNEL_CONTROL HCI_CHANNEL_LOGGING

Possible values for channel field in the :const:BTPROTO_HCI address.

.. availability:: Linux

.. versionadded:: 3.14

.. data:: AF_QIPCRTR

Constant for Qualcomm's IPC router protocol, used to communicate with service providing remote processors.

.. availability:: Linux >= 4.7.

.. data:: SCM_CREDS2 LOCAL_CREDS LOCAL_CREDS_PERSISTENT

LOCAL_CREDS and LOCAL_CREDS_PERSISTENT can be used with SOCK_DGRAM, SOCK_STREAM sockets, equivalent to Linux/DragonFlyBSD SO_PASSCRED, while LOCAL_CREDS sends the credentials at first read, LOCAL_CREDS_PERSISTENT sends for each read, SCM_CREDS2 must be then used for the latter for the message type.

.. versionadded:: 3.11

.. availability:: FreeBSD.

.. data:: SO_INCOMING_CPU

Constant to optimize CPU locality, to be used in conjunction with :data:SO_REUSEPORT.

.. versionadded:: 3.11

.. availability:: Linux >= 3.9

.. data:: SO_REUSEPORT_LB

Constant to enable duplicate address and port bindings with load balancing.

.. versionadded:: 3.14

.. availability:: FreeBSD >= 12.0

.. data:: AF_HYPERV HV_PROTOCOL_RAW HVSOCKET_CONNECT_TIMEOUT HVSOCKET_CONNECT_TIMEOUT_MAX HVSOCKET_CONNECTED_SUSPEND HVSOCKET_ADDRESS_FLAG_PASSTHRU HV_GUID_ZERO HV_GUID_WILDCARD HV_GUID_BROADCAST HV_GUID_CHILDREN HV_GUID_LOOPBACK HV_GUID_PARENT

Constants for Windows Hyper-V sockets for host/guest communications.

.. availability:: Windows.

.. versionadded:: 3.12

.. _socket-ethernet-types:

.. data:: ETHERTYPE_ARP ETHERTYPE_IP ETHERTYPE_IPV6 ETHERTYPE_VLAN

IEEE 802.3 protocol number <https://www.iana.org/assignments/ieee-802-numbers/ieee-802-numbers.txt>_. constants.

.. availability:: Linux, FreeBSD, macOS.

.. versionadded:: 3.12

.. data:: SHUT_RD SHUT_WR SHUT_RDWR

These constants are used by the :meth:~socket.socket.shutdown method of socket objects.

.. availability:: not WASI.

Functions ^^^^^^^^^

Creating sockets ''''''''''''''''

The following functions all create :ref:socket objects <socket-objects>.

.. class:: socket(family=AF_INET, type=SOCK_STREAM, proto=0, fileno=None)

Create a new socket using the given address family, socket type and protocol number. The address family should be :const:AF_INET (the default), :const:AF_INET6, :const:AF_UNIX, :const:AF_CAN, :const:AF_PACKET, or :const:AF_RDS. The socket type should be :const:SOCK_STREAM (the default), :const:SOCK_DGRAM, :const:SOCK_RAW or perhaps one of the other SOCK_ constants. The protocol number is usually zero and may be omitted or in the case where the address family is :const:AF_CAN the protocol should be one of :const:CAN_RAW, :const:CAN_BCM, :const:CAN_ISOTP or :const:CAN_J1939.

If fileno is specified, the values for family, type, and proto are auto-detected from the specified file descriptor. Auto-detection can be overruled by calling the function with explicit family, type, or proto arguments. This only affects how Python represents e.g. the return value of :meth:socket.getpeername but not the actual OS resource. Unlike :func:socket.fromfd, fileno will return the same socket and not a duplicate. This may help close a detached socket using :meth:socket.close.

The newly created socket is :ref:non-inheritable <fd_inheritance>.

.. audit-event:: socket.new self,family,type,protocol socket.socket

.. versionchanged:: 3.3 The AF_CAN family was added. The AF_RDS family was added.

.. versionchanged:: 3.4 The CAN_BCM protocol was added.

.. versionchanged:: 3.4 The returned socket is now non-inheritable.

.. versionchanged:: 3.7 The CAN_ISOTP protocol was added.

.. versionchanged:: 3.7 When :const:SOCK_NONBLOCK or :const:SOCK_CLOEXEC bit flags are applied to type they are cleared, and :attr:socket.type will not reflect them. They are still passed to the underlying system socket() call. Therefore,

  ::

      sock = socket.socket(
          socket.AF_INET,
          socket.SOCK_STREAM | socket.SOCK_NONBLOCK)

  will still create a non-blocking socket on OSes that support
  ``SOCK_NONBLOCK``, but ``sock.type`` will be set to
  ``socket.SOCK_STREAM``.

.. versionchanged:: 3.9 The CAN_J1939 protocol was added.

.. versionchanged:: 3.10 The IPPROTO_MPTCP protocol was added.

.. function:: socketpair([family[, type[, proto]]])

Build a pair of connected socket objects using the given address family, socket type, and protocol number. Address family, socket type, and protocol number are as for the :func:~socket.socket function. The default family is :const:AF_UNIX if defined on the platform; otherwise, the default is :const:AF_INET.

The newly created sockets are :ref:non-inheritable <fd_inheritance>.

.. versionchanged:: 3.2 The returned socket objects now support the whole socket API, rather than a subset.

.. versionchanged:: 3.4 The returned sockets are now non-inheritable.

.. versionchanged:: 3.5 Windows support added.

.. function:: create_connection(address, timeout=GLOBAL_DEFAULT, source_address=None, *, all_errors=False)

Connect to a TCP service listening on the internet address (a 2-tuple (host, port)), and return the socket object. This is a higher-level function than :meth:socket.connect: if host is a non-numeric hostname, it will try to resolve it for both :data:AF_INET and :data:AF_INET6, and then try to connect to all possible addresses in turn until a connection succeeds. This makes it easy to write clients that are compatible to both IPv4 and IPv6.

Passing the optional timeout parameter will set the timeout on the socket instance before attempting to connect. If no timeout is supplied, the global default timeout setting returned by :func:getdefaulttimeout is used.

If supplied, source_address must be a 2-tuple (host, port) for the socket to bind to as its source address before connecting. If host or port are '' or 0 respectively the OS default behavior will be used.

When a connection cannot be created, an exception is raised. By default, it is the exception from the last address in the list. If all_errors is True, it is an :exc:ExceptionGroup containing the errors of all attempts.

.. versionchanged:: 3.2 source_address was added.

.. versionchanged:: 3.11 all_errors was added.

.. function:: create_server(address, *, family=AF_INET, backlog=None, reuse_port=False, dualstack_ipv6=False)

Convenience function which creates a TCP socket bound to address (a 2-tuple (host, port)) and returns the socket object.

family should be either :data:AF_INET or :data:AF_INET6. backlog is the queue size passed to :meth:socket.listen; if not specified , a default reasonable value is chosen. reuse_port dictates whether to set the :data:SO_REUSEPORT socket option.

If dualstack_ipv6 is true, family is :data:AF_INET6 and the platform supports it the socket will be able to accept both IPv4 and IPv6 connections, else it will raise :exc:ValueError. Most POSIX platforms and Windows are supposed to support this functionality. When this functionality is enabled the address returned by :meth:socket.getpeername when an IPv4 connection occurs will be an IPv6 address represented as an IPv4-mapped IPv6 address. If dualstack_ipv6 is false it will explicitly disable this functionality on platforms that enable it by default (e.g. Linux). This parameter can be used in conjunction with :func:has_dualstack_ipv6:

 import socket

 addr = ("", 8080)  # all interfaces, port 8080
 if socket.has_dualstack_ipv6():
     s = socket.create_server(addr, family=socket.AF_INET6, dualstack_ipv6=True)
 else:
     s = socket.create_server(addr)

.. note:: On POSIX platforms the :data:SO_REUSEADDR socket option is set in order to immediately reuse previous sockets which were bound on the same address and remained in TIME_WAIT state.

.. versionadded:: 3.8

.. function:: has_dualstack_ipv6()

Return True if the platform supports creating a TCP socket which can handle both IPv4 and IPv6 connections.

.. versionadded:: 3.8

.. function:: fromfd(fd, family, type, proto=0)

Duplicate the file descriptor fd (an integer as returned by a file object's :meth:~io.IOBase.fileno method) and build a socket object from the result. Address family, socket type and protocol number are as for the :func:~socket.socket function. The file descriptor should refer to a socket, but this is not checked --- subsequent operations on the object may fail if the file descriptor is invalid. This function is rarely needed, but can be used to get or set socket options on a socket passed to a program as standard input or output (such as a server started by the Unix inet daemon). The socket is assumed to be in blocking mode.

The newly created socket is :ref:non-inheritable <fd_inheritance>.

.. versionchanged:: 3.4 The returned socket is now non-inheritable.

.. function:: fromshare(data)

Instantiate a socket from data obtained from the :meth:socket.share method. The socket is assumed to be in blocking mode.

.. availability:: Windows.

.. versionadded:: 3.3

.. data:: SocketType

This is a Python type object that represents the socket object type. It is the same as type(socket(...)).

Other functions '''''''''''''''

The :mod:!socket module also offers various network-related services:

.. function:: close(fd)

Close a socket file descriptor. This is like :func:os.close, but for sockets. On some platforms (most notably Windows) :func:os.close does not work for socket file descriptors.

.. versionadded:: 3.7

.. function:: getaddrinfo(host, port, family=AF_UNSPEC, type=0, proto=0, flags=0)

This function wraps the C function getaddrinfo of the underlying system.

Translate the host/port argument into a sequence of 5-tuples that contain all the necessary arguments for creating a socket connected to that service. host is a domain name, a string representation of an IPv4/v6 address or None. port is a string service name such as 'http', a numeric port number or None. By passing None as the value of host and port, you can pass NULL to the underlying C API.

The family, type and proto arguments can be optionally specified in order to provide options and limit the list of addresses returned. Pass their default values (:data:AF_UNSPEC, 0, and 0, respectively) to not limit the results. See the note below for details.

The flags argument can be one or several of the AI_* constants, and will influence how results are computed and returned. For example, :const:AI_NUMERICHOST will disable domain name resolution and will raise an error if host is a domain name.

The function returns a list of 5-tuples with the following structure:

(family, type, proto, canonname, sockaddr)

In these tuples, family, type, proto are all integers and are meant to be passed to the :func:~socket.socket function. canonname will be a string representing the canonical name of the host if :const:AI_CANONNAME is part of the flags argument; else canonname will be empty. sockaddr is a tuple describing a socket address, whose format depends on the returned family and flags Python was compiled with, and is meant to be passed to the :meth:socket.connect method.

sockaddr can be one of the following:

a (address, port) 2-tuple for :const:AF_INET
a (address, port, flowinfo, scope_id) 4-tuple for :const:AF_INET6 if Python was compiled with --enable-ipv6 (the default)
a 2-tuple containing raw data for :const:AF_INET6 if Python was compiled with --disable-ipv6

.. note::

  If you intend to use results from :func:`!getaddrinfo` to create a socket
  (rather than, for example, retrieve *canonname*),
  consider limiting the results by *type* (e.g. :data:`SOCK_STREAM` or
  :data:`SOCK_DGRAM`) and/or *proto* (e.g. :data:`IPPROTO_TCP` or
  :data:`IPPROTO_UDP`) that your application can handle.

  The behavior with default values of *family*, *type*, *proto*
  and *flags* is system-specific.

  Many systems (for example, most Linux configurations) will return a sorted
  list of all matching addresses.
  These addresses should generally be tried in order until a connection succeeds
  (possibly tried in parallel, for example, using a `Happy Eyeballs`_ algorithm).
  In these cases, limiting the *type* and/or *proto* can help eliminate
  unsuccessful or unusable connection attempts.

  Some systems will, however, only return a single address.
  (For example, this was reported on Solaris and AIX configurations.)
  On these systems, limiting the *type* and/or *proto* helps ensure that
  this address is usable.

.. audit-event:: socket.getaddrinfo host,port,family,type,protocol socket.getaddrinfo

The following example fetches address information for a hypothetical TCP connection to example.org on port 80 (results may differ on your system if IPv6 isn't enabled)::

  >>> socket.getaddrinfo("example.org", 80, proto=socket.IPPROTO_TCP)
  [(socket.AF_INET6, socket.SOCK_STREAM,
   6, '', ('2606:2800:220:1:248:1893:25c8:1946', 80, 0, 0)),
   (socket.AF_INET, socket.SOCK_STREAM,
   6, '', ('93.184.216.34', 80))]

.. versionchanged:: 3.2 parameters can now be passed using keyword arguments.

.. versionchanged:: 3.7 for IPv6 multicast addresses, string representing an address will not contain %scope_id part.

.. _Happy Eyeballs: https://en.wikipedia.org/wiki/Happy_Eyeballs

.. function:: getfqdn([name])

Return a fully qualified domain name for name. If name is omitted or empty, it is interpreted as the local host. To find the fully qualified name, the hostname returned by :func:gethostbyaddr is checked, followed by aliases for the host, if available. The first name which includes a period is selected. In case no fully qualified domain name is available and name was provided, it is returned unchanged. If name was empty or equal to '0.0.0.0', the hostname from :func:gethostname is returned.

.. function:: gethostbyname(hostname)

Translate a host name to IPv4 address format. The IPv4 address is returned as a string, such as '100.50.200.5'. If the host name is an IPv4 address itself it is returned unchanged. See :func:gethostbyname_ex for a more complete interface. :func:gethostbyname does not support IPv6 name resolution, and :func:getaddrinfo should be used instead for IPv4/v6 dual stack support.

.. audit-event:: socket.gethostbyname hostname socket.gethostbyname

.. availability:: not WASI.

.. function:: gethostbyname_ex(hostname)

Translate a host name to IPv4 address format, extended interface. Return a 3-tuple (hostname, aliaslist, ipaddrlist) where hostname is the host's primary host name, aliaslist is a (possibly empty) list of alternative host names for the same address, and ipaddrlist is a list of IPv4 addresses for the same interface on the same host (often but not always a single address). :func:gethostbyname_ex does not support IPv6 name resolution, and :func:getaddrinfo should be used instead for IPv4/v6 dual stack support.

.. audit-event:: socket.gethostbyname hostname socket.gethostbyname_ex

.. availability:: not WASI.

.. function:: gethostname()

Return a string containing the hostname of the machine where the Python interpreter is currently executing.

.. audit-event:: socket.gethostname "" socket.gethostname

Note: :func:gethostname doesn't always return the fully qualified domain name; use :func:getfqdn for that.

.. availability:: not WASI.

.. function:: gethostbyaddr(ip_address)

Return a 3-tuple (hostname, aliaslist, ipaddrlist) where hostname is the primary host name responding to the given ip_address, aliaslist is a (possibly empty) list of alternative host names for the same address, and ipaddrlist is a list of IPv4/v6 addresses for the same interface on the same host (most likely containing only a single address). To find the fully qualified domain name, use the function :func:getfqdn. :func:gethostbyaddr supports both IPv4 and IPv6.

.. audit-event:: socket.gethostbyaddr ip_address socket.gethostbyaddr

.. availability:: not WASI.

.. function:: getnameinfo(sockaddr, flags)

Translate a socket address sockaddr into a 2-tuple (host, port). Depending on the settings of flags, the result can contain a fully qualified domain name or numeric address representation in host. Similarly, port can contain a string port name or a numeric port number.

For IPv6 addresses, %scope_id is appended to the host part if sockaddr contains meaningful scope_id. Usually this happens for multicast addresses.

For more information about flags you can consult :manpage:getnameinfo(3).

.. audit-event:: socket.getnameinfo sockaddr socket.getnameinfo

.. availability:: not WASI.

.. function:: getprotobyname(protocolname)

Translate an internet protocol name (for example, 'icmp') to a constant suitable for passing as the (optional) third argument to the :func:~socket.socket function. This is usually only needed for sockets opened in "raw" mode (:const:SOCK_RAW); for the normal socket modes, the correct protocol is chosen automatically if the protocol is omitted or zero.

.. availability:: not WASI.

.. function:: getservbyname(servicename[, protocolname])

Translate an internet service name and protocol name to a port number for that service. The optional protocol name, if given, should be 'tcp' or 'udp', otherwise any protocol will match.

.. audit-event:: socket.getservbyname servicename,protocolname socket.getservbyname

.. availability:: not WASI.

.. function:: getservbyport(port[, protocolname])

Translate an internet port number and protocol name to a service name for that service. The optional protocol name, if given, should be 'tcp' or 'udp', otherwise any protocol will match.

.. audit-event:: socket.getservbyport port,protocolname socket.getservbyport

.. availability:: not WASI.

.. function:: ntohl(x)

Convert 32-bit positive integers from network to host byte order. On machines where the host byte order is the same as network byte order, this is a no-op; otherwise, it performs a 4-byte swap operation.

.. function:: ntohs(x)

Convert 16-bit positive integers from network to host byte order. On machines where the host byte order is the same as network byte order, this is a no-op; otherwise, it performs a 2-byte swap operation.

.. versionchanged:: 3.10 Raises :exc:OverflowError if x does not fit in a 16-bit unsigned integer.

.. function:: htonl(x)

Convert 32-bit positive integers from host to network byte order. On machines where the host byte order is the same as network byte order, this is a no-op; otherwise, it performs a 4-byte swap operation.

.. function:: htons(x)

Convert 16-bit positive integers from host to network byte order. On machines where the host byte order is the same as network byte order, this is a no-op; otherwise, it performs a 2-byte swap operation.

.. versionchanged:: 3.10 Raises :exc:OverflowError if x does not fit in a 16-bit unsigned integer.

.. function:: inet_aton(ip_string)

Convert an IPv4 address from dotted-quad string format (for example, '123.45.67.89') to 32-bit packed binary format, as a bytes object four characters in length. This is useful when conversing with a program that uses the standard C library and needs objects of type :c:struct:in_addr, which is the C type for the 32-bit packed binary this function returns.

:func:inet_aton also accepts strings with less than three dots; see the Unix manual page :manpage:inet(3) for details.

If the IPv4 address string passed to this function is invalid, :exc:OSError will be raised. Note that exactly what is valid depends on the underlying C implementation of :c:func:inet_aton.

:func:inet_aton does not support IPv6, and :func:inet_pton should be used instead for IPv4/v6 dual stack support.

.. function:: inet_ntoa(packed_ip)

Convert a 32-bit packed IPv4 address (a :term:bytes-like object four bytes in length) to its standard dotted-quad string representation (for example, '123.45.67.89'). This is useful when conversing with a program that uses the standard C library and needs objects of type :c:struct:in_addr, which is the C type for the 32-bit packed binary data this function takes as an argument.

If the byte sequence passed to this function is not exactly 4 bytes in length, :exc:OSError will be raised. :func:inet_ntoa does not support IPv6, and :func:inet_ntop should be used instead for IPv4/v6 dual stack support.

.. versionchanged:: 3.5 Writable :term:bytes-like object is now accepted.

.. function:: inet_pton(address_family, ip_string)

Convert an IP address from its family-specific string format to a packed, binary format. :func:inet_pton is useful when a library or network protocol calls for an object of type :c:struct:in_addr (similar to :func:inet_aton) or :c:struct:in6_addr.

Supported values for address_family are currently :const:AF_INET and :const:AF_INET6. If the IP address string ip_string is invalid, :exc:OSError will be raised. Note that exactly what is valid depends on both the value of address_family and the underlying implementation of :c:func:inet_pton.

.. availability:: Unix, Windows.

.. versionchanged:: 3.4 Windows support added

.. function:: inet_ntop(address_family, packed_ip)

Convert a packed IP address (a :term:bytes-like object of some number of bytes) to its standard, family-specific string representation (for example, '7.10.0.5' or '5aef:2b::8'). :func:inet_ntop is useful when a library or network protocol returns an object of type :c:struct:in_addr (similar to :func:inet_ntoa) or :c:struct:in6_addr.

Supported values for address_family are currently :const:AF_INET and :const:AF_INET6. If the bytes object packed_ip is not the correct length for the specified address family, :exc:ValueError will be raised. :exc:OSError is raised for errors from the call to :func:inet_ntop.

.. availability:: Unix, Windows.

.. versionchanged:: 3.4 Windows support added

.. versionchanged:: 3.5 Writable :term:bytes-like object is now accepted.

.. XXX: Are sendmsg(), recvmsg() and CMSG_*() available on any non-Unix platforms? The old (obsolete?) 4.2BSD form of the interface, in which struct msghdr has no msg_control or msg_controllen members, is not currently supported.

.. function:: CMSG_LEN(length)

Return the total length, without trailing padding, of an ancillary data item with associated data of the given length. This value can often be used as the buffer size for :meth:~socket.recvmsg to receive a single item of ancillary data, but :rfc:3542 requires portable applications to use :func:CMSG_SPACE and thus include space for padding, even when the item will be the last in the buffer. Raises :exc:OverflowError if length is outside the permissible range of values.

.. availability:: Unix, not WASI.

  Most Unix platforms.

.. versionadded:: 3.3

.. function:: CMSG_SPACE(length)

Return the buffer size needed for :meth:~socket.recvmsg to receive an ancillary data item with associated data of the given length, along with any trailing padding. The buffer space needed to receive multiple items is the sum of the :func:CMSG_SPACE values for their associated data lengths. Raises :exc:OverflowError if length is outside the permissible range of values.

Note that some systems might support ancillary data without providing this function. Also note that setting the buffer size using the results of this function may not precisely limit the amount of ancillary data that can be received, since additional data may be able to fit into the padding area.

.. availability:: Unix, not WASI.

  most Unix platforms.

.. versionadded:: 3.3

.. function:: getdefaulttimeout()

Return the default timeout in seconds (float) for new socket objects. A value of None indicates that new socket objects have no timeout. When the socket module is first imported, the default is None.

.. function:: setdefaulttimeout(timeout)

Set the default timeout in seconds (real number) for new socket objects. When the socket module is first imported, the default is None. See :meth:~socket.settimeout for possible values and their respective meanings.

.. versionchanged:: 3.15 Accepts any real number, not only integer or float.

.. function:: sethostname(name)

Set the machine's hostname to name. This will raise an :exc:OSError if you don't have enough rights.

.. audit-event:: socket.sethostname name socket.sethostname

.. availability:: Unix, not Android.

.. versionadded:: 3.3

.. function:: if_nameindex()

Return a list of network interface information (index int, name string) tuples. :exc:OSError if the system call fails.

.. availability:: Unix, Windows, not WASI.

.. versionadded:: 3.3

.. versionchanged:: 3.8 Windows support was added.

.. note::

  On Windows network interfaces have different names in different contexts
  (all names are examples):

  * UUID: ``{FB605B73-AAC2-49A6-9A2F-25416AEA0573}``
  * name: ``ethernet_32770``
  * friendly name: ``vEthernet (nat)``
  * description: ``Hyper-V Virtual Ethernet Adapter``

  This function returns names of the second form from the list, ``ethernet_32770``
  in this example case.

.. function:: if_nametoindex(if_name)

Return a network interface index number corresponding to an interface name. :exc:OSError if no interface with the given name exists.

.. availability:: Unix, Windows, not WASI.

.. versionadded:: 3.3

.. versionchanged:: 3.8 Windows support was added.

.. seealso:: "Interface name" is a name as documented in :func:if_nameindex.

.. function:: if_indextoname(if_index)

Return a network interface name corresponding to an interface index number. :exc:OSError if no interface with the given index exists.

.. availability:: Unix, Windows, not WASI.

.. versionadded:: 3.3

.. versionchanged:: 3.8 Windows support was added.

.. seealso:: "Interface name" is a name as documented in :func:if_nameindex.

.. function:: send_fds(sock, buffers, fds[, flags[, address]])

Send the list of file descriptors fds over an :const:AF_UNIX socket sock. The fds parameter is a sequence of file descriptors. Consult :meth:~socket.sendmsg for the documentation of these parameters.

.. availability:: Unix, not WASI.

  Unix platforms supporting :meth:`~socket.sendmsg`
  and :const:`SCM_RIGHTS` mechanism.

.. versionadded:: 3.9

.. function:: recv_fds(sock, bufsize, maxfds[, flags])

Receive up to maxfds file descriptors from an :const:AF_UNIX socket sock. Return (msg, list(fds), flags, addr). Consult :meth:~socket.recvmsg for the documentation of these parameters.

.. availability:: Unix, not WASI.

  Unix platforms supporting :meth:`~socket.recvmsg`
  and :const:`SCM_RIGHTS` mechanism.

.. versionadded:: 3.9

.. note::

  Any truncated integers at the end of the list of file descriptors.

.. _socket-objects:

Socket Objects

Socket objects have the following methods. Except for :meth:~socket.makefile, these correspond to Unix system calls applicable to sockets.

.. versionchanged:: 3.2 Support for the :term:context manager protocol was added. Exiting the context manager is equivalent to calling :meth:~socket.close.

.. method:: socket.accept()

Accept a connection. The socket must be bound to an address and listening for connections. The return value is a pair (conn, address) where conn is a new socket object usable to send and receive data on the connection, and address is the address bound to the socket on the other end of the connection.

The newly created socket is :ref:non-inheritable <fd_inheritance>.

.. versionchanged:: 3.4 The socket is now non-inheritable.

.. versionchanged:: 3.5 If the system call is interrupted and the signal handler does not raise an exception, the method now retries the system call instead of raising an :exc:InterruptedError exception (see :pep:475 for the rationale).

.. method:: socket.bind(address)

Bind the socket to address. The socket must not already be bound. The format of address depends on the address family --- see :ref:socket-addresses.

.. audit-event:: socket.bind self,address socket.socket.bind

.. availability:: not WASI.

.. method:: socket.close()

Mark the socket closed. The underlying system resource (e.g. a file descriptor) is also closed when all file objects from :meth:makefile are closed. Once that happens, all future operations on the socket object will fail. The remote end will receive no more data (after queued data is flushed).

Sockets are automatically closed when they are garbage-collected, but it is recommended to :meth:close them explicitly, or to use a :keyword:with statement around them.

.. versionchanged:: 3.6 :exc:OSError is now raised if an error occurs when the underlying :c:func:close call is made.

.. note::

  :meth:`close` releases the resource associated with a connection but
  does not necessarily close the connection immediately.  If you want
  to close the connection in a timely fashion, call :meth:`shutdown`
  before :meth:`close`.

.. method:: socket.connect(address)

Connect to a remote socket at address. The format of address depends on the address family --- see :ref:socket-addresses.

If the connection is interrupted by a signal, the method waits until the connection completes, or raises a :exc:TimeoutError on timeout, if the signal handler doesn't raise an exception and the socket is blocking or has a timeout. For non-blocking sockets, the method raises an :exc:InterruptedError exception if the connection is interrupted by a signal (or the exception raised by the signal handler).

.. audit-event:: socket.connect self,address socket.socket.connect

.. versionchanged:: 3.5 The method now waits until the connection completes instead of raising an :exc:InterruptedError exception if the connection is interrupted by a signal, the signal handler doesn't raise an exception and the socket is blocking or has a timeout (see the :pep:475 for the rationale).

.. availability:: not WASI.

.. method:: socket.connect_ex(address)

Like connect(address), but return an error indicator instead of raising an exception for errors returned by the C-level :c:func:connect call (other problems, such as "host not found," can still raise exceptions). The error indicator is 0 if the operation succeeded, otherwise the value of the :c:data:errno variable. This is useful to support, for example, asynchronous connects.

.. audit-event:: socket.connect self,address socket.socket.connect_ex

.. availability:: not WASI.

.. method:: socket.detach()

Put the socket object into closed state without actually closing the underlying file descriptor. The file descriptor is returned, and can be reused for other purposes.

.. versionadded:: 3.2

.. method:: socket.dup()

Duplicate the socket.

The newly created socket is :ref:non-inheritable <fd_inheritance>.

.. versionchanged:: 3.4 The socket is now non-inheritable.

.. availability:: not WASI.

.. method:: socket.fileno()

Return the socket's file descriptor (a small integer), or -1 on failure. This is useful with :func:select.select.

Under Windows the small integer returned by this method cannot be used where a file descriptor can be used (such as :func:os.fdopen). Unix does not have this limitation.

.. method:: socket.get_inheritable()

Get the :ref:inheritable flag <fd_inheritance> of the socket's file descriptor or socket's handle: True if the socket can be inherited in child processes, False if it cannot.

.. versionadded:: 3.4

.. method:: socket.getpeername()

Return the remote address to which the socket is connected. This is useful to find out the port number of a remote IPv4/v6 socket, for instance. The format of the address returned depends on the address family --- see :ref:socket-addresses. On some systems this function is not supported.

.. method:: socket.getsockname()

Return the socket's own address. This is useful to find out the port number of an IPv4/v6 socket, for instance. The format of the address returned depends on the address family --- see :ref:socket-addresses.

.. method:: socket.getsockopt(level, optname[, buflen])

Return the value of the given socket option (see the Unix man page :manpage:getsockopt(2)). The needed symbolic constants (:ref:SO_\* etc. <socket-unix-constants>) are defined in this module. If buflen is absent, an integer option is assumed and its integer value is returned by the function. If buflen is present, it specifies the maximum length of the buffer used to receive the option in, and this buffer is returned as a bytes object. It is up to the caller to decode the contents of the buffer (see the optional built-in module :mod:struct for a way to decode C structures encoded as byte strings).

.. availability:: not WASI.

.. method:: socket.getblocking()

Return True if socket is in blocking mode, False if in non-blocking.

This is equivalent to checking socket.gettimeout() != 0.

.. versionadded:: 3.7

.. method:: socket.gettimeout()

Return the timeout in seconds (float) associated with socket operations, or None if no timeout is set. This reflects the last call to :meth:setblocking or :meth:settimeout.

.. method:: socket.ioctl(control, option)

The :meth:ioctl method is a limited interface to the WSAIoctl system interface. Please refer to the Win32 documentation <https://msdn.microsoft.com/en-us/library/ms741621%28VS.85%29.aspx>_ for more information.

On other platforms, the generic :func:fcntl.fcntl and :func:fcntl.ioctl functions may be used; they accept a socket object as their first argument.

Currently only the following control codes are supported: SIO_RCVALL, SIO_KEEPALIVE_VALS, and SIO_LOOPBACK_FAST_PATH.

.. availability:: Windows

.. versionchanged:: 3.6 SIO_LOOPBACK_FAST_PATH was added.

.. method:: socket.listen([backlog])

Enable a server to accept connections. If backlog is specified, it must be at least 0 (if it is lower, it is set to 0); it specifies the number of unaccepted connections that the system will allow before refusing new connections. If not specified, a default reasonable value is chosen.

.. availability:: not WASI.

.. versionchanged:: 3.5 The backlog parameter is now optional.

.. method:: socket.makefile(mode='r', buffering=None, *, encoding=None,
errors=None, newline=None)

.. index:: single: I/O control; buffering

Return a :term:file object associated with the socket. The exact returned type depends on the arguments given to :meth:makefile. These arguments are interpreted the same way as by the built-in :func:open function, except the only supported mode values are 'r' (default), 'w', 'b', or a combination of those.

The socket must be in blocking mode; it can have a timeout, but the file object's internal buffer may end up in an inconsistent state if a timeout occurs.

Closing the file object returned by :meth:makefile won't close the original socket unless all other file objects have been closed and :meth:socket.close has been called on the socket object.

.. note::

  On Windows, the file-like object created by :meth:`makefile` cannot be
  used where a file object with a file descriptor is expected, such as the
  stream arguments of :meth:`subprocess.Popen`.

.. method:: socket.recv(bufsize[, flags])

Receive data from the socket. The return value is a bytes object representing the data received. The maximum amount of data to be received at once is specified by bufsize. A returned empty bytes object indicates that the client has disconnected. See the Unix manual page :manpage:recv(2) for the meaning of the optional argument flags; it defaults to zero.

.. method:: socket.recvfrom(bufsize[, flags])

Receive data from the socket. The return value is a pair (bytes, address) where bytes is a bytes object representing the data received and address is the address of the socket sending the data. See the Unix manual page :manpage:recv(2) for the meaning of the optional argument flags; it defaults to zero. The format of address depends on the address family --- see :ref:socket-addresses.

.. versionchanged:: 3.7 For multicast IPv6 address, first item of address does not contain %scope_id part anymore. In order to get full IPv6 address use :func:getnameinfo.

.. method:: socket.recvmsg(bufsize[, ancbufsize[, flags]])

Receive normal data (up to bufsize bytes) and ancillary data from the socket. The ancbufsize argument sets the size in bytes of the internal buffer used to receive the ancillary data; it defaults to 0, meaning that no ancillary data will be received. Appropriate buffer sizes for ancillary data can be calculated using :func:CMSG_SPACE or :func:CMSG_LEN, and items which do not fit into the buffer might be truncated or discarded. The flags argument defaults to 0 and has the same meaning as for :meth:recv.

The return value is a 4-tuple: (data, ancdata, msg_flags, address). The data item is a :class:bytes object holding the non-ancillary data received. The ancdata item is a list of zero or more tuples (cmsg_level, cmsg_type, cmsg_data) representing the ancillary data (control messages) received: cmsg_level and cmsg_type are integers specifying the protocol level and protocol-specific type respectively, and cmsg_data is a :class:bytes object holding the associated data. The msg_flags item is the bitwise OR of various flags indicating conditions on the received message; see your system documentation for details. If the receiving socket is unconnected, address is the address of the sending socket, if available; otherwise, its value is unspecified.

On some systems, :meth:sendmsg and :meth:recvmsg can be used to pass file descriptors between processes over an :const:AF_UNIX socket. When this facility is used (it is often restricted to :const:SOCK_STREAM sockets), :meth:recvmsg will return, in its ancillary data, items of the form (socket.SOL_SOCKET, socket.SCM_RIGHTS, fds), where fds is a :class:bytes object representing the new file descriptors as a binary array of the native C :c:expr:int type. If :meth:recvmsg raises an exception after the system call returns, it will first attempt to close any file descriptors received via this mechanism.

Some systems do not indicate the truncated length of ancillary data items which have been only partially received. If an item appears to extend beyond the end of the buffer, :meth:recvmsg will issue a :exc:RuntimeWarning, and will return the part of it which is inside the buffer provided it has not been truncated before the start of its associated data.

On systems which support the :const:SCM_RIGHTS mechanism, the following function will receive up to maxfds file descriptors, returning the message data and a list containing the descriptors (while ignoring unexpected conditions such as unrelated control messages being received). See also :meth:sendmsg. ::

  import socket, array

  def recv_fds(sock, msglen, maxfds):
      fds = array.array("i")   # Array of ints
      msg, ancdata, flags, addr = sock.recvmsg(msglen, socket.CMSG_LEN(maxfds * fds.itemsize))
      for cmsg_level, cmsg_type, cmsg_data in ancdata:
          if cmsg_level == socket.SOL_SOCKET and cmsg_type == socket.SCM_RIGHTS:
              # Append data, ignoring any truncated integers at the end.
              fds.frombytes(cmsg_data[:len(cmsg_data) - (len(cmsg_data) % fds.itemsize)])
      return msg, list(fds)

.. availability:: Unix.

  Most Unix platforms.

.. versionadded:: 3.3

.. method:: socket.recvmsg_into(buffers[, ancbufsize[, flags]])

Receive normal data and ancillary data from the socket, behaving as :meth:recvmsg would, but scatter the non-ancillary data into a series of buffers instead of returning a new bytes object. The buffers argument must be an iterable of objects that export writable buffers (e.g. :class:bytearray objects); these will be filled with successive chunks of the non-ancillary data until it has all been written or there are no more buffers. The operating system may set a limit (:func:~os.sysconf value SC_IOV_MAX) on the number of buffers that can be used. The ancbufsize and flags arguments have the same meaning as for :meth:recvmsg.

The return value is a 4-tuple: (nbytes, ancdata, msg_flags, address), where nbytes is the total number of bytes of non-ancillary data written into the buffers, and ancdata, msg_flags and address are the same as for :meth:recvmsg.

Example::

  >>> import socket
  >>> s1, s2 = socket.socketpair()
  >>> b1 = bytearray(b'----')
  >>> b2 = bytearray(b'0123456789')
  >>> b3 = bytearray(b'--------------')
  >>> s1.send(b'Mary had a little lamb')
  22
  >>> s2.recvmsg_into([b1, memoryview(b2)[2:9], b3])
  (22, [], 0, None)
  >>> [b1, b2, b3]
  [bytearray(b'Mary'), bytearray(b'01 had a 9'), bytearray(b'little lamb---')]

.. availability:: Unix.

  Most Unix platforms.

.. versionadded:: 3.3

.. method:: socket.recvfrom_into(buffer[, nbytes[, flags]])

Receive data from the socket, writing it into buffer instead of creating a new bytestring. The return value is a pair (nbytes, address) where nbytes is the number of bytes received and address is the address of the socket sending the data. See the Unix manual page :manpage:recv(2) for the meaning of the optional argument flags; it defaults to zero. The format of address depends on the address family --- see :ref:socket-addresses.

.. method:: socket.recv_into(buffer[, nbytes[, flags]])

Receive up to nbytes bytes from the socket, storing the data into a buffer rather than creating a new bytestring. If nbytes is not specified (or 0), receive up to the size available in the given buffer. Returns the number of bytes received. See the Unix manual page :manpage:recv(2) for the meaning of the optional argument flags; it defaults to zero.

.. method:: socket.send(bytes[, flags])

Send data to the socket. The socket must be connected to a remote socket. The optional flags argument has the same meaning as for :meth:recv. Returns the number of bytes sent. Applications are responsible for checking that all data has been sent; if only some of the data was transmitted, the application needs to attempt delivery of the remaining data. For further information on this topic, consult the :ref:socket-howto.

.. method:: socket.sendall(bytes[, flags])

Send data to the socket. The socket must be connected to a remote socket. The optional flags argument has the same meaning as for :meth:recv. Unlike :meth:send, this method continues to send data from bytes until either all data has been sent or an error occurs. None is returned on success. On error, an exception is raised, and there is no way to determine how much data, if any, was successfully sent.

.. versionchanged:: 3.5 The socket timeout is no longer reset each time data is sent successfully. The socket timeout is now the maximum total duration to send all data.

.. method:: socket.sendto(bytes, address) socket.sendto(bytes, flags, address)

Send data to the socket. The socket should not be connected to a remote socket, since the destination socket is specified by address. The optional flags argument has the same meaning as for :meth:recv. Return the number of bytes sent. The format of address depends on the address family --- see :ref:socket-addresses.

.. audit-event:: socket.sendto self,address socket.socket.sendto

.. method:: socket.sendmsg(buffers[, ancdata[, flags[, address]]])

Send normal and ancillary data to the socket, gathering the non-ancillary data from a series of buffers and concatenating it into a single message. The buffers argument specifies the non-ancillary data as an iterable of :term:bytes-like objects <bytes-like object> (e.g. :class:bytes objects); the operating system may set a limit (:func:~os.sysconf value SC_IOV_MAX) on the number of buffers that can be used. The ancdata argument specifies the ancillary data (control messages) as an iterable of zero or more tuples (cmsg_level, cmsg_type, cmsg_data), where cmsg_level and cmsg_type are integers specifying the protocol level and protocol-specific type respectively, and cmsg_data is a bytes-like object holding the associated data. Note that some systems (in particular, systems without :func:CMSG_SPACE) might support sending only one control message per call. The flags argument defaults to 0 and has the same meaning as for :meth:send. If address is supplied and not None, it sets a destination address for the message. The return value is the number of bytes of non-ancillary data sent.

The following function sends the list of file descriptors fds over an :const:AF_UNIX socket, on systems which support the :const:SCM_RIGHTS mechanism. See also :meth:recvmsg. ::

  import socket, array

  def send_fds(sock, msg, fds):
      return sock.sendmsg([msg], [(socket.SOL_SOCKET, socket.SCM_RIGHTS, array.array("i", fds))])

.. availability:: Unix, not WASI.

  Most Unix platforms.

.. audit-event:: socket.sendmsg self,address socket.socket.sendmsg

.. versionadded:: 3.3

.. method:: socket.sendmsg_afalg([msg], *, op[, iv[, assoclen[, flags]]])

Specialized version of :meth:~socket.sendmsg for :const:AF_ALG socket. Set mode, IV, AEAD associated data length and flags for :const:AF_ALG socket.

.. availability:: Linux >= 2.6.38.

.. versionadded:: 3.6

.. method:: socket.sendfile(file, offset=0, count=None)

Send a file until EOF is reached by using high-performance :mod:os.sendfile and return the total number of bytes which were sent. file must be a regular file object opened in binary mode. If :mod:os.sendfile is not available (e.g. Windows) or file is not a regular file :meth:send will be used instead. offset tells from where to start reading the file. If specified, count is the total number of bytes to transmit as opposed to sending the file until EOF is reached. File position is updated on return or also in case of error in which case :meth:file.tell() <io.IOBase.tell> can be used to figure out the number of bytes which were sent. The socket must be of :const:SOCK_STREAM type. Non-blocking sockets are not supported.

.. versionadded:: 3.5

.. method:: socket.set_inheritable(inheritable)

Set the :ref:inheritable flag <fd_inheritance> of the socket's file descriptor or socket's handle.

.. versionadded:: 3.4

.. method:: socket.setblocking(flag)

Set blocking or non-blocking mode of the socket: if flag is false, the socket is set to non-blocking, else to blocking mode.

This method is a shorthand for certain :meth:~socket.settimeout calls:

sock.setblocking(True) is equivalent to sock.settimeout(None)
sock.setblocking(False) is equivalent to sock.settimeout(0.0)

.. versionchanged:: 3.7 The method no longer applies :const:SOCK_NONBLOCK flag on :attr:socket.type.

.. method:: socket.settimeout(value)

Set a timeout on blocking socket operations. The value argument can be a nonnegative real number expressing seconds, or None. If a non-zero value is given, subsequent socket operations will raise a :exc:timeout exception if the timeout period value has elapsed before the operation has completed. If zero is given, the socket is put in non-blocking mode. If None is given, the socket is put in blocking mode.

For further information, please consult the :ref:notes on socket timeouts <socket-timeouts>.

.. versionchanged:: 3.7 The method no longer toggles :const:SOCK_NONBLOCK flag on :attr:socket.type.

.. versionchanged:: 3.15 Accepts any real number, not only integer or float.

.. method:: socket.setsockopt(level, optname, value: int | Buffer) socket.setsockopt(level, optname, None, optlen: int)

.. index:: pair: module; struct

Set the value of the given socket option (see the Unix manual page :manpage:setsockopt(2)). The needed symbolic constants are defined in this module (:ref:!SO_\* etc. <socket-unix-constants>). The value can be an integer, None or a :term:bytes-like object representing a buffer. In the latter case it is up to the caller to ensure that the bytestring contains the proper bits (see the optional built-in module :mod:struct for a way to encode C structures as bytestrings). When value is set to None, optlen argument is required. It's equivalent to calling :c:func:setsockopt C function with optval=NULL and optlen=optlen.

.. versionchanged:: 3.5 Writable :term:bytes-like object is now accepted.

.. versionchanged:: 3.6 setsockopt(level, optname, None, optlen: int) form added.

.. availability:: not WASI.

.. method:: socket.shutdown(how)

Shut down one or both halves of the connection. If how is :const:SHUT_RD, further receives are disallowed. If how is :const:SHUT_WR, further sends are disallowed. If how is :const:SHUT_RDWR, further sends and receives are disallowed.

.. availability:: not WASI.

.. method:: socket.share(process_id)

Duplicate a socket and prepare it for sharing with a target process. The target process must be provided with process_id. The resulting bytes object can then be passed to the target process using some form of interprocess communication and the socket can be recreated there using :func:fromshare. Once this method has been called, it is safe to close the socket since the operating system has already duplicated it for the target process.

.. availability:: Windows.

.. versionadded:: 3.3

Note that there are no methods :meth:read or :meth:write; use :meth:~socket.recv and :meth:~socket.send without flags argument instead.

Socket objects also have these (read-only) attributes that correspond to the values given to the :class:~socket.socket constructor.

.. attribute:: socket.family

The socket family.

.. attribute:: socket.type

The socket type.

.. attribute:: socket.proto

The socket protocol.

.. _socket-timeouts:

Notes on socket timeouts

A socket object can be in one of three modes: blocking, non-blocking, or timeout. Sockets are by default always created in blocking mode, but this can be changed by calling :func:setdefaulttimeout.

In blocking mode, operations block until complete or the system returns an error (such as connection timed out).
In non-blocking mode, operations fail (with an error that is unfortunately system-dependent) if they cannot be completed immediately: functions from the :mod:select module can be used to know when and whether a socket is available for reading or writing.
In timeout mode, operations fail if they cannot be completed within the timeout specified for the socket (they raise a :exc:timeout exception) or if the system returns an error.

.. note:: At the operating system level, sockets in timeout mode are internally set in non-blocking mode. Also, the blocking and timeout modes are shared between file descriptors and socket objects that refer to the same network endpoint. This implementation detail can have visible consequences if e.g. you decide to use the :meth:~socket.fileno of a socket.

Timeouts and the connect method ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

The :meth:~socket.connect operation is also subject to the timeout setting, and in general it is recommended to call :meth:~socket.settimeout before calling :meth:~socket.connect or pass a timeout parameter to :meth:create_connection. However, the system network stack may also return a connection timeout error of its own regardless of any Python socket timeout setting.

Timeouts and the accept method ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

If :func:getdefaulttimeout is not :const:None, sockets returned by the :meth:~socket.accept method inherit that timeout. Otherwise, the behaviour depends on settings of the listening socket:

if the listening socket is in blocking mode or in timeout mode, the socket returned by :meth:~socket.accept is in blocking mode;
if the listening socket is in non-blocking mode, whether the socket returned by :meth:~socket.accept is in blocking or non-blocking mode is operating system-dependent. If you want to ensure cross-platform behaviour, it is recommended you manually override this setting.

.. _socket-example:

Example

Here are four minimal example programs using the TCP/IP protocol: a server that echoes all data that it receives back (servicing only one client), and a client using it. Note that a server must perform the sequence :func:~socket.socket, :meth:~socket.bind, :meth:~socket.listen, :meth:~socket.accept (possibly repeating the :meth:~socket.accept to service more than one client), while a client only needs the sequence :func:~socket.socket, :meth:~socket.connect. Also note that the server does not :meth:~socket.sendall/:meth:~socket.recv on the socket it is listening on but on the new socket returned by :meth:~socket.accept.

The first two examples support IPv4 only. ::

Echo server program

import socket

HOST = '' # Symbolic name meaning all available interfaces PORT = 50007 # Arbitrary non-privileged port with socket.socket(socket.AF_INET, socket.SOCK_STREAM) as s: s.bind((HOST, PORT)) s.listen(1) conn, addr = s.accept() with conn: print('Connected by', addr) while True: data = conn.recv(1024) if not data: break conn.sendall(data)

Echo client program

import socket

HOST = 'daring.cwi.nl' # The remote host PORT = 50007 # The same port as used by the server with socket.socket(socket.AF_INET, socket.SOCK_STREAM) as s: s.connect((HOST, PORT)) s.sendall(b'Hello, world') data = s.recv(1024) print('Received', repr(data))

The next two examples are identical to the above two, but support both IPv4 and IPv6. The server side will listen to the first address family available (it should listen to both instead). On most of IPv6-ready systems, IPv6 will take precedence and the server may not accept IPv4 traffic. The client side will try to connect to all the addresses returned as a result of the name resolution, and sends traffic to the first one connected successfully. ::

Echo server program

import socket import sys

HOST = None # Symbolic name meaning all available interfaces PORT = 50007 # Arbitrary non-privileged port s = None for res in socket.getaddrinfo(HOST, PORT, socket.AF_UNSPEC, socket.SOCK_STREAM, 0, socket.AI_PASSIVE): af, socktype, proto, canonname, sa = res try: s = socket.socket(af, socktype, proto) except OSError as msg: s = None continue try: s.bind(sa) s.listen(1) except OSError as msg: s.close() s = None continue break if s is None: print('could not open socket') sys.exit(1) conn, addr = s.accept() with conn: print('Connected by', addr) while True: data = conn.recv(1024) if not data: break conn.send(data)

Echo client program

import socket import sys

HOST = 'daring.cwi.nl' # The remote host PORT = 50007 # The same port as used by the server s = None for res in socket.getaddrinfo(HOST, PORT, socket.AF_UNSPEC, socket.SOCK_STREAM): af, socktype, proto, canonname, sa = res try: s = socket.socket(af, socktype, proto) except OSError as msg: s = None continue try: s.connect(sa) except OSError as msg: s.close() s = None continue break if s is None: print('could not open socket') sys.exit(1) with s: s.sendall(b'Hello, world') data = s.recv(1024) print('Received', repr(data))

The next example shows how to write a very simple network sniffer with raw sockets on Windows. The example requires administrator privileges to modify the interface::

import socket

the public network interface

HOST = socket.gethostbyname(socket.gethostname())

create a raw socket and bind it to the public interface

s = socket.socket(socket.AF_INET, socket.SOCK_RAW, socket.IPPROTO_IP) s.bind((HOST, 0))

Include IP headers

s.setsockopt(socket.IPPROTO_IP, socket.IP_HDRINCL, 1)

receive all packets

s.ioctl(socket.SIO_RCVALL, socket.RCVALL_ON)

receive a packet

print(s.recvfrom(65565))

disabled promiscuous mode

s.ioctl(socket.SIO_RCVALL, socket.RCVALL_OFF)

The next example shows how to use the socket interface to communicate to a CAN network using the raw socket protocol. To use CAN with the broadcast manager protocol instead, open a socket with::

socket.socket(socket.AF_CAN, socket.SOCK_DGRAM, socket.CAN_BCM)

After binding (:const:CAN_RAW) or connecting (:const:CAN_BCM) the socket, you can use the :meth:socket.send and :meth:socket.recv operations (and their counterparts) on the socket object as usual.

This last example might require special privileges::

import socket import struct

CAN frame packing/unpacking (see 'struct can_frame' in <linux/can.h>)

can_frame_fmt = "=IB3x8s" can_frame_size = struct.calcsize(can_frame_fmt)

def build_can_frame(can_id, data): can_dlc = len(data) data = data.ljust(8, b'\x00') return struct.pack(can_frame_fmt, can_id, can_dlc, data)

def dissect_can_frame(frame): can_id, can_dlc, data = struct.unpack(can_frame_fmt, frame) return (can_id, can_dlc, data[:can_dlc])

create a raw socket and bind it to the 'vcan0' interface

s = socket.socket(socket.AF_CAN, socket.SOCK_RAW, socket.CAN_RAW) s.bind(('vcan0',))

while True: cf, addr = s.recvfrom(can_frame_size)

   print('Received: can_id=%x, can_dlc=%x, data=%s' % dissect_can_frame(cf))

   try:
       s.send(cf)
   except OSError:
       print('Error sending CAN frame')

   try:
       s.send(build_can_frame(0x01, b'\x01\x02\x03'))
   except OSError:
       print('Error sending CAN frame')

Running an example several times with too small delay between executions, could lead to this error::

OSError: [Errno 98] Address already in use

This is because the previous execution has left the socket in a TIME_WAIT state, and can't be immediately reused.

There is a :mod:!socket flag to set, in order to prevent this, :const:socket.SO_REUSEADDR::

s = socket.socket(socket.AF_INET, socket.SOCK_STREAM) s.setsockopt(socket.SOL_SOCKET, socket.SO_REUSEADDR, 1) s.bind((HOST, PORT))

the :data:SO_REUSEADDR flag tells the kernel to reuse a local socket in TIME_WAIT state, without waiting for its natural timeout to expire.

.. seealso::

For an introduction to socket programming (in C), see the following papers:

An Introductory 4.3BSD Interprocess Communication Tutorial, by Stuart Sechrest
An Advanced 4.3BSD Interprocess Communication Tutorial, by Samuel J. Leffler et al,

both in the UNIX Programmer's Manual, Supplementary Documents 1 (sections PS1:7 and PS1:8). The platform-specific reference material for the various socket-related system calls are also a valuable source of information on the details of socket semantics. For Unix, refer to the manual pages; for Windows, see the WinSock (or Winsock 2) specification. For IPv6-ready APIs, readers may want to refer to :rfc:3493 titled Basic Socket Interface Extensions for IPv6.

:mod:`!socket` --- Low-level networking interface

:mod:!socket --- Low-level networking interface

Socket families

Module contents

Socket Objects

Notes on socket timeouts

Example

Echo server program

Echo client program

Echo server program

Echo client program

the public network interface

create a raw socket and bind it to the public interface

Include IP headers

receive all packets

receive a packet

disabled promiscuous mode

CAN frame packing/unpacking (see 'struct can_frame' in <linux/can.h>)

create a raw socket and bind it to the 'vcan0' interface

:mod:`!socket` --- Low-level networking interface