RP2040 / RP2350 Mongoose example

This example can be built for both RP2040 and RP2350 targets.

Set target board

By default, it builds for RP2040 target. If you want to change the target board, edit CMakeKists.txt and set the board, for example:

set(PICO_BOARD pico2_w)

Edit WiFi credentials

For WiFi examples, edit wifi.c and set WiFi network name and password.

Build and run

Make sure you have picotool installed. Then run:

make build flash

Start serial console to see the debug output.

See detailed documentation at https://mongoose.ws/docs/guides/rp-tcpip-stack/