Back to Mongoose

Wifi Examples Readme

tutorials/nxp/frdm-rw612-xpresso-freertos-lwip/doc/wifi_examples_readme.md

7.21579 B
Original Source

Hardware requirements

  • Micro USB cable
  • FRDM-RW612 board
  • Personal Computer

Board settings

No special settings are required.

Prepare the Demo

  1. Connect a micro USB cable between the PC host and the MCU-Link USB port (J10) on the board.
  2. Open a serial terminal with the following settings:
    • 115200 baud rate
    • 8 data bits
    • No parity
    • One stop bit
    • No flow control
  3. Download the program to the target board.
  4. Launch the debugger in your IDE to begin running the example.