doc/rbd/nvmeof-target-configure.rst
A working Ceph Tentacle or later storage cluster, deployed with cephadm
NVMe-oF gateways, which can either be colocated with OSD nodes or on dedicated nodes
Separate network subnets for NVME-oF front-end traffic and Ceph back-end traffic
The Ceph NVMe-oF gateway is both an NVMe-oF target and a Ceph client. Think of it as a "translator" between Ceph's RBD interface and the NVME-oF protocol. The Ceph NVMe-oF gateway can run on a standalone node or be colocated with other daemons, for example on an OSD node. When colocating the Ceph NVMe-oF gateway with other daemons, ensure that sufficient CPU and memory are available. The steps below explain how to install and configure the Ceph NVMe/TCP gateway for basic operation.
Complete the following steps to install the Ceph NVME-oF gateway:
#. Create a pool in which the gateways configuration can be managed:
.. prompt:: bash #
ceph osd pool create NVME-OF_POOL_NAME
#. Enable RBD on the NVMe-oF pool:
.. prompt:: bash #
rbd pool init NVME-OF_POOL_NAME
#. Deploy the NVMe-oF gateway daemons on a specific set of nodes:
.. prompt:: bash #
ceph orch apply nvmeof NVME-OF_POOL_NAME --placement="host01, host02"
Download the nvmeof-cli container before first use.
To download it use the following command:
.. prompt:: bash #
podman pull quay.io/ceph/nvmeof-cli:latest
#. Create an NVMe subsystem:
.. prompt:: bash #
podman run -it --rm quay.io/ceph/nvmeof-cli:latest --server-address GATEWAY_IP --server-port GATEWAY_PORT 5500 subsystem add --subsystem SUSYSTEM_NQN
The subsystem NQN is a user defined string, for example nqn.2016-06.io.spdk:cnode1.
#. Define the IP port on the gateway that will process the NVME/TCP commands and I/O:
a. On the install node, get the NVME-oF Gateway name:
.. prompt:: bash #
ceph orch ps | grep nvme
b. Define the IP port for the gateway:
.. prompt:: bash #
podman run -it --rm quay.io/ceph/nvmeof-cli:latest --server-address GATEWAY_IP --server-port GATEWAY_PORT 5500 listener add --subsystem SUBSYSTEM_NQN --host-name HOST_NAME --traddr GATEWAY_IP --trsvcid 4420
#. Get the host NQN (NVME Qualified Name) for each host:
.. prompt:: bash #
cat /etc/nvme/hostnqn
.. prompt:: bash #
esxcli nvme info get
#. Allow the initiator host to connect to the newly-created NVMe subsystem:
.. prompt:: bash #
podman run -it --rm quay.io/ceph/nvmeof-cli:latest --server-address GATEWAY_IP --server-port GATEWAY_PORT 5500 host add --subsystem SUBSYSTEM_NQN --host "HOST_NQN1 HOST_NQN2"
#. List all subsystems configured in the gateway:
.. prompt:: bash #
podman run -it --rm quay.io/ceph/nvmeof-cli:latest --server-address GATEWAY_IP --server-port GATEWAY_PORT 5500 subsystem list
#. Create a new NVMe namespace:
.. prompt:: bash #
podman run -it quay.io/ceph/nvmeof-cli:latest --server-address GATEWAY_IP --server-port GATEWAY_PORT 5500 namespace add --subsystem SUBSYSTEM_NQN --rbd-pool POOL_NAME --rbd-image IMAGE_NAME
#. List all namespaces in the subsystem:
.. prompt:: bash #
podman run -it quay.io/ceph/nvmeof-cli:latest --server-address GATEWAY_IP --server-port GATEWAY_PORT 5500 namespace list --subsystem SUBSYSTEM_NQN