Apollo 8.0 Quick Start Guide

This document is based on four typical scenarios, from simple to complex, to introduce how to use the package in a typical way, so that developers can quickly get started using Apollo.

Prerequisites

Before reading this document, make sure you have installed the Apollo environment manager tool and launch apollo env container successfully according to the installation documentation.

Demo

<video src="https://apollo-pkg-beta.cdn.bcebos.com/e2e/QuickStartDemo_v0.4_en.mp4" width="700px" height="400px" controls="controls"></video>

Scenario 1: Using Dreamview to View Records

This scenario describes how to use Dreamview to play records and provides a foundation for developers to become familiar with the Apollo platform. You can use Dreamview to play the records provided by Apollo to further observe and learn about Apollo autonomous driving.

This article explains the installation and simple usage steps of Dreamview. For the detailed documentation of Dreamview, see the Dreamview documentation.

Step 1: Enter the Apollo Docker environment

1. Create workspace

mkdir application-demo
cd application-demo

2. Start Apollo env container

aem start

3. Enter Apollo env container

aem enter

Note: If you want to force the container to be recreated you can specify the -f option and If you are using multiple containers at the same time, it is helpful to specify the container name with the --name option

4. Initialize workspace

aem init

Step 2: Install DreamView

In the same terminal, enter the following command to install Apollo's DreamView program.

sudo apt install apollo-neo-dreamview-dev apollo-neo-monitor-dev

Step 3: Launch Dreamview

In the same terminal, enter the following command to start Apollo's DreamView program.

aem bootstrap start

Step 4: Download the Apollo demo record

A file with .record suffix is what we call a record.

The Record file is used to record messages sent/received to/from channels in Cyber RT. Reply record files can help reproduce the behavior of previous operations of Cyber RT.

From the command line, type the following command to download the record package.

wget https://apollo-system.cdn.bcebos.com/dataset/6.0_edu/demo_3.5.record

Step 5: Play the Apollo demo record

cyber_recorder play -f demo_3.5.record --loop

Note: The --loop option is used to set the loop playback mode.

Step 6: Use DreamView to view the record

Enter https://localhost:8888 in your browser to access Apollo DreamView:

If all is well, you can see a car moving forward in DreamView. The car and road conditions you see now are simply a playback of the data from the record by DreamView, just like playing back a recorded video.

Step 7: Stop DreamView

Enter the following command to end the DreamView process:

aem bootstrap stop

Scenario 2: Cyber Component Extensions

This document describes how to develop and compile and run a Cyber component as a simple extension to example-component to provide a foundation for developers to become familiar with the Apollo platform. You can observe and learn more about the Apollo compilation process by compiling and running example-component.

The source code of example-component in the QuickStart Project is a demo based on Cyber RT extending Apollo functional components. If you are interested in how to write a component, dag file and launch file, you can find the full source code of example-component in the QuickStart Project.

The directory structure of demo/example-component is shown below:

demo/example_components/
|-- src
|   |-- common_component_example.cc
|   |-- common_component_example.h
|   |-- BUILD
|-- proto
|   |--examples.proto
|   |--BUILD
|-- BUILD
|-- cyberfile.xml
|-- example.dag
|-- example.launch

Step 1: Download quickstart project

Clone demo project

git clone https://github.com/ApolloAuto/application-demo.git

and enter project directory

cd application-demo

Step 2: Enter the Apollo Docker environment

Start apollo env container.

aem start

Note: If you want to force the container to be recreated you can specify the -f option and If you are using multiple containers at the same time, it is helpful to specify the container name with the --name option.

Enter apollo env container.

aem enter

Step 3: Compile the component

Enter the following command to compile the component.

buildtool build --packages example_components

The --packages argument specifies the path to the package specified in the compilation workspace, in this case example_components.

For more detailed usage of buildtool, please refer to the Apollo buildtool documentation

When you call the script build command, the current directory is the workspace directory, so be sure to use the script build command in the workspace.

Apollo's compilation tool will automatically analyze all the required dependencies, download and generate the necessary dependency information files automatically.

If the compiler needs to pass in arguments, you can use --builder_args to specify them.

Step 4: Run the component

Run the following command:

cyber_launch start example_components/example.launch

If everything works, the terminal will display as follows:

At this point, you can open another terminal, run cyber_monitor, and observe the data in channels:

cyber_monitor

Scenario 3: Learning and experimenting with the planning module

This scenario describes how to learn and adjust the planning module, compile and debug the planning module, and help developers get familiar with the Apollo 8.0 development model.

The planning_customization module is an End-2-End solution (i.e. you can run through the entire contents of Routing Request within the simulation environment), but it does not contain any source code but a cyberfile.xml file. The cyberfile.xml file describes all the component packages (planning-dev, dreamview-dev, routing-dev, task_manager, and monitor-dev) that are dependent on the scenario and how they have been imported. Since the planning source code needs to be extended, the planning-dev package is introduced as "src", and the planning source code is automatically downloaded and copied to the workspace when the module is compiled.

The cyberfile for planning_customization is shown as follows:

<package>
  <name>planning-customization</name>
  <version>1.0.0</version>
  <description>
   planning_customization
  </description>
  <maintainer email="[email protected]">apollo-support</maintainer>
  <type>module</type>
  <src_path>//planning_customization</src_path>
  <license>BSD</license>
  <author>Apollo</author>
  <depend>bazel-extend-tools-dev</depend>
  <depend type="binary" repo_name="dreamview">dreamview-dev</depend>
  <depend type="binary" repo_name="routing">routing-dev</depend>
  <depend type="binary" repo_name="task-manager">task-manager-dev</depend>
  <depend type="binary" repo_name="monitor">monitor-dev</depend>
  <depend type="src" repo_name="planning">planning-dev</depend>

  <depend expose="False">3rd-rules-python-dev</depend>
  <depend expose="False">3rd-grpc-dev</depend>
  <depend expose="False">3rd-bazel-skylib-dev</depend>
  <depend expose="False">3rd-rules-proto-dev</depend>
  <depend expose="False">3rd-py-dev</depend>
  <depend expose="False">3rd-gpus-dev</depend>

  <builder>bazel</builder>
</package>

Step 1: Download quickstart project

Clone demo project

git clone https://github.com/ApolloAuto/application-demo.git

and enter project directory

cd application-demo

Step 2: Enter the Apollo Docker environment

Start apollo env container.

aem start

Note: If you want to force the container to be recreated you can specify the -f option and If you are using multiple containers at the same time, it is helpful to specify the container name with the --name option.

Enter apollo env container.

aem enter

Step 3: Compile the planning source code package

buildtool build --packages planning_customization

The --packages argument specifies the path to the package specified in the compilation workspace, in this case planning_customization, and defaults to all packages in the workspace if not specified.

When script compile command is called, the current directory is the workspace directory, so be sure to use the script compile command under the workspace.

Apollo's compilation tool will automatically analyze all the required dependencies, download and generate the necessary dependency information files automatically. The first time you build, you need to pull some dependency packages from the Internet, which takes about 13 minutes depending on the speed and configuration of your computer.

Step 4: Debug planning

Enter the following command to run dreamview:

aem bootstrap start

If you have already started Dreamview, enter the following command to restart the Dreamview process:

aem bootstrap restart

At this point, DreamView and monitor will be started automatically, and you can enter localhost:8888 in your browser to open DreamView:

Step 5: Enter sim control simulation mode for debugging

1. Select the mode, model and map.

   • Select MKz Standard Debug in the upper menu bar.
   • Select MkzExample for the vehicle model.
   • Select Sunnyvale Big Loop for the map.

2. Click Tasks, and in the Others module, select Sim Control to enter the simulation control, as shown in the following figure.

3. Click the Module Controller column on the left to start the process of the module to be debugged, and select the Planning, Routing modules.

4. Set the vehicle simulation driving path, click Route Editing on the left side, drag and click the mouse to set the vehicle driving path in the map, as shown in the following figure:

5. After you set the point position, click Send Routing Request. As shown in the following figure, the red path is found in the map by the Routing module, and the blue path is the local path planned by the Planning module at real time.

6. At this point, if you want to debug the planning module, you can directly modify the planning source code in the workspace, which is located in the modules/planning directory, and re-run the compilation script after the changes are made:

buildtool build --packages planning_customization

7. Re-run the planning module in Dreamview.

Scenario 4: Awareness LIDAR Functionality Testing

This scenario describes how to start the Lidar Perception module using a package to help developers get familiar with the Apollo Perception module. You can observe the results of the Lidar Perception run by playing the record provided by Apollo.

Prerequisites

This document assumes that you have followed the Installation - Package Method > Installing Apollo environment manager tool to complete Steps 1 and 2. Compared to the three examples above, testing the sensing module functionality requires the use of the GPU, so you should obtain the GPU image of the package for testing and verification.

Step 1: Start Apollo Docker environment and enter

1. Create workspace

mkdir application-demo
cd application-demo

2. Enter the following command to start in GPU mode:

aem start_gpu -f

3. Enter the following command to access the container:

aem enter

4. Initialize workspace

aem init

Step 2: Download the record

1. Enter the following command to download the record:

wget https://apollo-system.bj.bcebos.com/dataset/6.0_edu/sensor_rgb.tar.xz

2. Create a directory and extract the downloaded record to the directory:

sudo mkdir -p ./data/bag/
sudo tar -xzvf sensor_rgb.tar.xz -C ./data/bag/

Step 3: Install DreamView

Note: Apollo core can only be installed inside the container, do not perform this step on the host!

In the same terminal, enter the following command to install the DreamView program.

buildtool install --legacy dreamview-dev monitor-dev

Step 4: Install transform, perception and localization

1. In the same terminal, enter the following command to install the perception program.

buildtool install --legacy perception-dev

2. Enter the following command to install localization, v2x and transform programs.

buildtool install --legacy localization-dev v2x-dev transform-dev

Step 5: Run the module

1. Modify the pointcloud_topic flag in /apollo/modules/common/data/global_flagfile.txt (or add the pointcloud_topic flag if it doesn't exist) to specify the channel for point cloud data.

--pointcloud_topic=/apollo/sensor/velodyne64/compensator/PointCloud2

2. In the same terminal, enter the following command to start Apollo's DreamView program.

aem bootstrap

Enter localhost:8888 in the browser to open the DreamView page, then select the correct mode, model, and map.

Click the Module Controller module in the status bar on the left side of the page to start the transform module.

3. Start the LIDAR module using the mainboard method:

mainboard -d /apollo/modules/perception/production/dag/dag_streaming_perception_lidar.dag

Step 6: Result verification

1. Play the record: you need to mask out the perception channel data contained in the record with -k parameter.

cyber_recorder play -f ./data/bag/sensor_rgb.record -k /perception/vehicle/obstacles /apollo/perception/obstacles /apollo/perception/traffic_light /apollo/perception

2. Verify the detection result: click the LayerMenu in the left toolbar of DreamView and turn on Point Cloud in Perception.

To view the results.

Step 7: Model Replacement

The following describes the parameter configuration and replacement process for the MASK_PILLARS_DETECTION, CNN_SEGMENTATION, and CENTER_POINT_DETECTION models in the lidar detection process. You can easily replace these in lidar_detection_pipeline.pb.txt configuration to load and run a different model.

MASK_PILLARS_DETECTION Model Replacement

Modify the contents of the configuration file in lidar_detection_pipeline.pb.txt

vim /apollo/modules/perception/pipeline/config/lidar_detection_pipeline.pb.txt

Replace stage_type with MASK_PILLARS_DETECTION

stage_type: MASK_PILLARS_DETECTION

and change the content of the configuration file information of the corresponding stage to

stage_config: {
    stage_type: MASK_PPILLARS_DETECTION
    enabled: true
}

After saving the configuration file changes, start the LIDAR module and play the record to verify the detection results.

CNN_SEGMENTATION model replacement

Modify the content of the configuration file in lidar_detection_pipeline.pb.txt: replace stage_type with CNN_SEGMENTATION and modify the content of the configuration file of the corresponding stage.

stage_type: CNN_SEGMENTATION

stage_config: {
  stage_type: CNN_SEGMENTATION
  enabled: true

  cnnseg_config: {
    sensor_name: "velodyne128"
    param_file: "/apollo/modules/perception/production/data/perception/lidar/models/cnnseg/velodyne64/cnnseg_param.conf"
    proto_file: "/apollo/modules/perception/production/data/perception/lidar/models/cnnseg/velodyne64/deploy.prototxt"
    weight_file: "/apollo/modules/perception/production/data/perception/lidar/models/cnnseg/velodyne64/deploy.caffemodel"
    engine_file: "/apollo/modules/perception/production/data/perception/lidar/models/cnnseg/velodyne64/engine.conf"
  }
}

Start the lidar module and play the record to verify the detection result.

CENTER_POINT_DETECTION model replacement

Replace stage_type with CENTER_POINT_DETECTION:

stage_type: CENTER_POINT_DETECTION

and change the content of the configuration file information of the corresponding stage to

stage_config: {
  stage_type: CENTER_POINT_DETECTION
  enabled: true
}

Start the LIDAR module and play the record to verify the detection result:

Install Apollo module source code

This section describes how to install the Apollo modules' source code under the workspace after installing the package.

Step 1: Start and enter apollo env container

Download demo project

git clone https://github.com/ApolloAuto/application-demo.git

Enter project directory

cd application-demo

the folder will be mounted to /apollo_workspace

Start apollo env container

aem start

Enter apollo env container

aem enter

Step 2: Install source code

Execute the following command to install the source code

buildtool install cyber-dev audio-dev bridge-dev canbus-dev canbus-vehicle-lincoln-dev common-dev control-dev dreamview-dev drivers-dev guardian-dev localization-dev map-dev monitor-dev perception-dev planning-gpu-dev prediction-dev routing-dev storytelling-dev task-manager-dev third-party-perception-dev transform-dev v2x-dev

A series of warnings may appear during the installation process, which is normal and can be ignored.