Classic Actors

@@includeincludes.md { #actor-api }

Module info

@@@note The Akka dependencies are available from Akka’s secure library repository. To access them you need to use a secure, tokenized URL as specified at https://account.akka.io/token. @@@

To use Classic Actors, add the following dependency in your project:

@@dependency[sbt,Maven,Gradle] { bomGroup=com.typesafe.akka bomArtifact=akka-bom_$scala.binary.version$ bomVersionSymbols=AkkaVersion symbol1=AkkaVersion value1="$akka.version$" group="com.typesafe.akka" artifact="akka-actor_$scala.binary.version$" version=AkkaVersion group2="com.typesafe.akka" artifact2="akka-testkit_$scala.binary.version$" scope2=test version2=AkkaVersion }

@@project-info{ projectId="akka-actor" }

Introduction

The Actor Model provides a higher level of abstraction for writing concurrent and distributed systems. It alleviates the developer from having to deal with explicit locking and thread management, making it easier to write correct concurrent and parallel systems. Actors were defined in the 1973 paper by Carl Hewitt but have been popularized by the Erlang language and used for example at Ericsson with great success to build highly concurrent and reliable telecom systems.

The API of Akka’s Actors is similar to Scala Actors which has borrowed some of its syntax from Erlang.

Creating Actors

@@@ note

Since Akka enforces parental supervision every actor is supervised and (potentially) the supervisor of its children, it is advisable to familiarize yourself with @ref:Actor Systems, @ref:supervision and @ref:handling exceptions as well as @ref:Actor References, Paths and Addresses.

@@@

Defining an Actor class

@@@ div { .group-scala }

Actors are implemented by extending the @scaladocActor base trait and implementing the @scaladocreceive method. The receive method should define a series of case statements (which has the type PartialFunction[Any, Unit]) that define which messages your Actor can handle, using standard Scala pattern matching, along with the implementation of how the messages should be processed.

@@@

@@@ div { .group-java }

Actor classes are implemented by extending the @javadocAbstractActor class and setting the “initial behavior” in the @javadoccreateReceive method.

The createReceive method has no arguments and returns @javadocAbstractActor.Receive. It defines which messages your Actor can handle, along with the implementation of how the messages should be processed. You can build such behavior with a builder named @javadocReceiveBuilder. This build has a convenient factory in AbstractActor called @javadocreceiveBuilder.

@@@

Here is an example:

Scala : @@snip ActorDocSpec.scala { #imports1 #my-actor }

Java : @@snip MyActor.java { #imports #my-actor }

Please note that the Akka Actor @scala[receive] message loop is exhaustive, which is different compared to Erlang and the late Scala Actors. This means that you need to provide a pattern match for all messages that it can accept and if you want to be able to handle unknown messages then you need to have a default case as in the example above. Otherwise an @apidoc[akka.actor.UnhandledMessage] will be published to the @apidoc[akka.actor.ActorSystem]'s @apidoc[akka.event.EventStream].

Note further that the return type of the behavior defined above is @scaladocUnit; if the actor shall reply to the received message then this must be done explicitly as explained below.

The result of the @scala[@scaladocreceive method is a partial function object, which is] @java[@javadoccreateReceive method is @javadocAbstractActor.Receive which is a wrapper around partial scala function object. It is] stored within the actor as its “initial behavior”, see @ref:Become/Unbecome for further information on changing the behavior of an actor after its construction.

Props

@apidoc[akka.actor.Props] is a configuration class to specify options for the creation of actors, think of it as an immutable and thus freely shareable recipe for creating an actor including associated deployment information (e.g., which dispatcher to use, see more below). Here are some examples of how to create a Props instance.

Scala : @@snip ActorDocSpec.scala { #creating-props }

Java : @@snip ActorDocTest.java { #import-props #creating-props }

The second variant shows how to pass constructor arguments to the @apidoc[akka.actor.Actor] being created, but it should only be used outside of actors as explained below.

The last line shows a possibility to pass constructor arguments regardless of the context it is being used in. The presence of a matching constructor is verified during construction of the Props object, resulting in an @javadocIllegalArgumentException if no or multiple matching constructors are found.

@@@ note { .group-scala }

The recommended approach to create the actor @apidoc[akka.actor.Props] is not supported for cases when the actor constructor takes value classes as arguments.

@@@

Dangerous Variants

Scala : @@snip ActorDocSpec.scala { #creating-props-deprecated }

Java : @@snip ActorDocTest.java { #creating-props-deprecated }

This method is not recommended being used within another actor because it encourages to close over the enclosing scope, resulting in non-serializable Props and possibly race conditions (breaking the actor encapsulation). On the other hand, using this variant in a Props factory in the actor’s companion object as documented under “Recommended Practices” below is completely fine.

There were two use-cases for these methods: passing constructor arguments to the actor—which is solved by the newly introduced @scala[@scaladocProps.apply(clazz, args)] @java[@javadocProps.create(clazz, args)] method above or the recommended practice below—and creating actors “on the spot” as anonymous classes. The latter should be solved by making these actors named classes instead (if they are not declared within a top-level object then the enclosing instance’s this reference needs to be passed as the first argument).

@@@ warning

Declaring one actor within another is very dangerous and breaks actor encapsulation. Never pass an actor’s this reference into Props!

@@@

@@@ div { .group-scala }

Edge cases

There are two edge cases in actor creation with @scaladocakka.actor.Props:

An actor with @scaladocAnyVal arguments.

@@snip PropsEdgeCaseSpec.scala { #props-edge-cases-value-class }

@@snip PropsEdgeCaseSpec.scala { #props-edge-cases-value-class-example }

An actor with default constructor values.

@@snip PropsEdgeCaseSpec.scala { #props-edge-cases-default-values }

In both cases, an @javadocIllegalArgumentException will be thrown stating no matching constructor could be found.

The next section explains the recommended ways to create @scaladocActor props in a way, which simultaneously safe-guards against these edge cases.

@@@

Recommended Practices

It is a good idea to provide @scala[factory methods on the companion object of each @apidocActor] @java[static factory methods for each @apidocActor] which help keeping the creation of suitable Props as close to the actor definition as possible. This also avoids the pitfalls associated with using the @scala[@scaladocProps.apply(...) method which takes a by-name argument, since within a companion object] @java[ @javadocProps.create(...) method which takes arguments as constructor parameters, since within static method] the given code block will not retain a reference to its enclosing scope:

Scala : @@snip ActorDocSpec.scala { #props-factory }

Java : @@snip ActorDocTest.java { #props-factory }

Another good practice is to declare what messages an Actor can receive @scala[in the companion object of the Actor] @java[as close to the actor definition as possible (e.g. as static classes inside the Actor or using other suitable class)], which makes easier to know what it can receive:

Scala : @@snip ActorDocSpec.scala { #messages-in-companion }

Java : @@snip ActorDocTest.java { #messages-in-companion }

Creating Actors with Props

Actors are created by passing a @apidoc[akka.actor.Props] instance into the actorOf factory method which is available on @apidoc[akka.actor.ActorSystem] and @apidoc[akka.actor.ActorContext].

Scala : @@snip ActorDocSpec.scala { #system-actorOf }

Java : @@snip ActorDocTest.java { #import-actorRef }

Using the ActorSystem will create top-level actors, supervised by the actor system’s provided guardian actor while using an actor’s context will create a child actor.

Scala : @@snip ActorDocSpec.scala { #context-actorOf }

Java : @@snip ActorDocTest.java { #context-actorOf }

It is recommended to create a hierarchy of children, grand-children and so on such that it fits the logical failure-handling structure of the application, see @ref:Actor Systems.

The call to actorOf returns an instance of @apidoc[akka.actor.ActorRef]. This is a handle to the actor instance and the only way to interact with it. The ActorRef is immutable and has a one to one relationship with the Actor it represents. The ActorRef is also serializable and network-aware. This means that you can serialize it, send it over the wire and use it on a remote host, and it will still be representing the same Actor on the original node, across the network.

The name parameter is optional, but you should preferably name your actors, since that is used in log messages and for identifying actors. The name must not be empty or start with $, but it may contain URL encoded characters (eg., %20 for a blank space). If the given name is already in use by another child to the same parent an @apidoc[akka.actor.InvalidActorNameException] is thrown.

Actors are automatically started asynchronously when created.

@@@ div { .group-scala }

Value classes as constructor arguments

The recommended way to instantiate actor props uses reflection at runtime to determine the correct actor constructor to be invoked and due to technical limitations it is not supported when said constructor takes arguments that are value classes. In these cases you should either unpack the arguments or create the props by calling the constructor manually:

@@snip ActorDocSpec.scala { #actor-with-value-class-argument }

@@@

Dependency Injection

If your @apidoc[akka.actor.Actor] has a constructor that takes parameters then those need to be part of the @apidoc[akka.actor.Props] as well, as described @ref:above. But there are cases when a factory method must be used, for example when the actual constructor arguments are determined by a dependency injection framework.

Scala : @@snip ActorDocSpec.scala { #creating-indirectly }

Java : @@snip DependencyInjectionDocTest.java { #import #creating-indirectly }

@@@ warning

You might be tempted at times to offer an @apidoc[akka.actor.IndirectActorProducer] which always returns the same instance, e.g. by using a @scala[lazy val.] @java[static field.] This is not supported, as it goes against the meaning of an actor restart, which is described here: @ref:What Restarting Means.

When using a dependency injection framework, actor beans MUST NOT have singleton scope.

@@@

Techniques for dependency injection and integration with dependency injection frameworks are described in more depth in the Using Akka with Dependency Injection guideline and the Akka Java Spring tutorial.

Actor API

@scala[The @apidoc[akka.actor.Actor] trait defines only one abstract method, the above mentioned receive, which implements the behavior of the actor.] @java[The @apidoc[akka.actor.AbstractActor] class defines a method called createReceive, that is used to set the “initial behavior” of the actor.]

If the current actor behavior does not match a received message, unhandled is called, which by default publishes an @apidocakka.actor.UnhandledMessage(message, sender, recipient) on the actor system’s event stream (set configuration item akka.actor.debug.unhandled to on to have them converted into actual Debug messages).

In addition, it offers:

@scala[@scaladocself] @java[@javadocgetSelf()] reference to the @apidoc[akka.actor.ActorRef] of the actor
@scala[@scaladocsender] @java[@javadocgetSender()] reference sender Actor of the last received message, typically used as described in @scala[Actor.Reply] @java[LambdaActor.Reply]
@scala[@scaladocsupervisorStrategy] @java[@javadocsupervisorStrategy()] user overridable definition the strategy to use for supervising child actors

This strategy is typically declared inside the actor to have access to the actor’s internal state within the decider function: since failure is communicated as a message sent to the supervisor and processed like other messages (albeit outside the normal behavior), all values and variables within the actor are available, as is the sender reference (which will be the immediate child reporting the failure; if the original failure occurred within a distant descendant it is still reported one level up at a time).
@scala[@scaladoccontext] @java[@javadocgetContext()] exposes contextual information for the actor and the current message, such as:
- factory methods to create child actors (actorOf)
- system that the actor belongs to
- parent supervisor
- supervised children
- lifecycle monitoring
- hotswap behavior stack as described in @scala[Actor.HotSwap] @java[Become/Unbecome]

@@@ div { .group-scala }

You can import the members in the context to avoid prefixing access with context.

@@snip ActorDocSpec.scala { #import-context }

@@@

The remaining visible methods are user-overridable life-cycle hooks which are described in the following:

Scala : @@snip Actor.scala { #lifecycle-hooks }

Java : @@snip ActorDocTest.java { #lifecycle-callbacks }

The implementations shown above are the defaults provided by the @scala[@scaladocActor trait.] @java[@javadocAbstractActor class.]

Actor Lifecycle

A path in an actor system represents a "place" that might be occupied by a living actor. Initially (apart from system initialized actors) a path is empty. When actorOf() is called it assigns an incarnation of the actor described by the passed @apidoc[akka.actor.Props] to the given path. An actor incarnation is identified by the path and a UID.

It is worth noting about the difference between:

restart
stop, followed by a re-creation of the actor

as explained below.

A restart only swaps the @apidoc[akka.actor.Actor] instance defined by the @apidoc[akka.actor.Props] but the incarnation and hence the UID remains the same. As long as the incarnation is the same, you can keep using the same @apidoc[akka.actor.ActorRef]. Restart is handled by the @ref:Supervision Strategy of actor's parent actor, and there is more discussion about @ref:what restart means.

The lifecycle of an incarnation ends when the actor is stopped. At that point, the appropriate lifecycle events are called and watching actors are notified of the termination. After the incarnation is stopped, the path can be reused again by creating an actor with actorOf(). In this case, the name of the new incarnation will be the same as the previous one, but the UIDs will differ. An actor can be stopped by the actor itself, another actor or the @apidocActorSystem (see @ref:Stopping actors).

@@@ note

It is important to note that Actors do not stop automatically when no longer referenced, every Actor that is created must also explicitly be destroyed. The only simplification is that stopping a parent Actor will also recursively stop all the child Actors that this parent has created.

@@@

An @apidoc[akka.actor.ActorRef] always represents an incarnation (path and UID) not just a given path. Therefore, if an actor is stopped, and a new one with the same name is created then an ActorRef of the old incarnation will not point to the new one.

@apidoc[akka.actor.ActorSelection] on the other hand points to the path (or multiple paths if wildcards are used) and is completely oblivious to which incarnation is currently occupying it. ActorSelection cannot be watched for this reason. It is possible to resolve the current incarnation's ActorRef living under the path by sending an @apidoc[akka.actor.Identify] message to the ActorSelection which will be replied to with an @apidoc[akka.actor.ActorIdentity] containing the correct reference (see @ref:ActorSelection). This can also be done with the @apidocresolveOne {scala="#resolveOne(timeout:scala.concurrent.duration.FiniteDuration):scala.concurrent.Future[akka.actor.ActorRef]" java="#resolveOne(java.time.Duration)"} method of the ActorSelection, which returns a @scala[@scaladocFuture]@java[@javadocCompletionStage] of the matching ActorRef.

Lifecycle Monitoring aka DeathWatch

To be notified when another actor terminates (i.e., stops permanently, not a temporary failure and restart), an actor may register itself for reception of the @apidoc[akka.actor.Terminated] message dispatched by the other actor upon termination (see @ref:Stopping Actors). This service is provided by the DeathWatch component of the actor system.

Registering a monitor is easy:

Scala : @@snip ActorDocSpec.scala { #watch }

Java : @@snip ActorDocTest.java { #import-terminated #watch }

It should be noted that the @apidoc[akka.actor.Terminated] message is generated independently of the order in which registration and termination occur. In particular, the watching actor will receive a Terminated message even if the watched actor has already been terminated at the time of registration.

Registering multiple times does not necessarily lead to multiple messages being generated, but there is no guarantee that only exactly one such message is received: if termination of the watched actor has generated and queued the message, and another registration is done before this message has been processed, then a second message will be queued because registering for monitoring of an already terminated actor leads to the immediate generation of the Terminated message.

It is also possible to deregister from watching another actor’s liveliness using @apidoccontext.unwatch(target) {scala="#unwatch(subject:akka.actor.ActorRef):akka.actor.ActorRef" java="#unwatch(akka.actor.ActorRef)"}. This works even if the Terminated message has already been enqueued in the mailbox; after calling unwatch no Terminated message for that actor will be processed anymore.

Start Hook

Right after starting the actor, its @scala[@scaladocpreStart]@java[@javadocpreStart] method is invoked.

Scala : @@snip ActorDocSpec.scala { #preStart }

Java : @@snip ActorDocTest.java { #preStart }

This method is called when the actor is first created. During restarts, it is called by the default implementation of @scala[@scaladocpostRestart]@java[@javadocpostRestart], which means that by overriding that method you can choose whether the initialization code in this method is called only exactly once for this actor or every restart. Initialization code which is part of the actor’s constructor will always be called when an instance of the actor class is created, which happens at every restart.

Restart Hooks

All actors are supervised, i.e., linked to another actor with a fault handling strategy. Actors may be restarted in case an exception is thrown while processing a message (see @ref:supervision). This restart involves the hooks mentioned above:

The old actor is informed by calling @scala[@scaladocpreRestart]@java[@javadocpreRestart] with the exception which caused the restart, and the message which triggered that exception; the latter may be None if the restart was not caused by processing a message, e.g. when a supervisor does not trap the exception and is restarted in turn by its supervisor, or if an actor is restarted due to a sibling’s failure. If the message is available, then that message’s sender is also accessible in the usual way (i.e. by calling @scala[@scaladocsender] @java[@javadocgetSender()]). This method is the best place for cleaning up, preparing hand-over to the fresh actor instance, etc. By default, it stops all children and calls @scala[@scaladocpostStop]@java[@javadocpostStop].
The initial factory from the actorOf call is used to produce the fresh instance.
The new actor’s postRestart method is invoked with the exception which caused the restart. By default the preStart is called, just as in the normal start-up case.

An actor restart replaces only the actual actor object; the contents of the mailbox are unaffected by the restart, so the processing of messages will resume after the postRestart hook returns. The message that triggered the exception will not be received again. Any message sent to an actor while it is being restarted will be queued to its mailbox as usual.

@@@ warning

Be aware that the ordering of failure notifications relative to user messages is not deterministic. In particular, a parent might restart its child before it has processed the last messages sent by the child before the failure. See @ref:Discussion: Message Ordering for details.

@@@

Stop Hook

After stopping an actor, its @scala[@scaladocpostStop]@java[@javadocpostStop] hook is called, which may be used e.g. for deregistering this actor from other services. This hook is guaranteed to run after message queuing has been disabled for this actor, i.e. messages sent to a stopped actor will be redirected to the @apidocdeadLetters {scala="#deadLetters:akka.actor.ActorRef" java="#deadLetters()"} of the @apidoc[akka.actor.ActorSystem].

Identifying Actors via Actor Selection

As described in @ref:Actor References, Paths and Addresses, each actor has a unique logical path, which is obtained by following the chain of actors from child to parent until reaching the root of the actor system, and it has a physical path, which may differ if the supervision chain includes any remote supervisors. These paths are used by the system to look up actors, e.g. when a remote message is received and the recipient is searched, but they are also useful more directly: actors may look up other actors by specifying absolute or relative paths—logical or physical—and receive back an @apidoc[akka.actor.ActorSelection] with the result:

Scala : @@snip ActorDocSpec.scala { #selection-local }

Java : @@snip ActorDocTest.java { #selection-local }

@@@ note

It is always preferable to communicate with other Actors using their ActorRef instead of relying upon ActorSelection. Exceptions are

sending messages using the @ref:At-Least-Once Delivery facility
initiating the first contact with a remote system

In all other cases, ActorRefs can be provided during Actor creation or initialization, passing them from parent to child or introducing Actors by sending their ActorRefs to other Actors within messages.

@@@

The supplied path is parsed as a @javadocjava.net.URI, which means that it is split on / into path elements. If the path starts with /, it is absolute and the look-up starts at the root guardian (which is the parent of "/user"); otherwise it starts at the current actor. If a path element equals .., the look-up will take a step “up” towards the supervisor of the currently traversed actor, otherwise it will step “down” to the named child. It should be noted that the .. in actor paths here always means the logical structure, i.e. the supervisor.

The path elements of an actor selection may contain wildcard patterns allowing for broadcasting of messages to that section:

Scala : @@snip ActorDocSpec.scala { #selection-wildcard }

Java : @@snip ActorDocTest.java { #selection-wildcard }

Messages can be sent via the @apidoc[akka.actor.ActorSelection] and the path of the ActorSelection is looked up when delivering each message. If the selection does not match any actors the message will be dropped.

To acquire an @apidoc[akka.actor.ActorRef] for an ActorSelection you need to send a message to the selection and use the @scala[@scaladocsender] @java[@javadocgetSender()]) reference of the reply from the actor. There is a built-in @apidoc[akka.actor.Identify] message that all Actors will understand and automatically reply to with an @apidoc[akka.actor.ActorIdentity] message containing the @apidoc[akka.actor.ActorRef]. This message is handled specially by the actors which are traversed in the sense that if a concrete name lookup fails (i.e. a non-wildcard path element does not correspond to a live actor) then a negative result is generated. Please note that this does not mean that delivery of that reply is guaranteed, it still is a normal message.

Scala : @@snip ActorDocSpec.scala { #identify }

Java : @@snip ActorDocTest.java { #import-identify #identify }

You can also acquire an ActorRef for an ActorSelection with the @apidocresolveOne {scala="#resolveOne(timeout:scala.concurrent.duration.FiniteDuration):scala.concurrent.Future[akka.actor.ActorRef]" java="#resolveOne(java.time.Duration)"} method of the ActorSelection. It returns a @scala[@scaladocFuture]@java[@javadocCompletionStage] of the matching ActorRef if such an actor exists. It is completed with failure @apidoc[akka.actor.ActorNotFound] if no such actor exists or the identification didn't complete within the supplied timeout.

Remote actor addresses may also be looked up, if @ref:remoting is enabled:

Scala : @@snip ActorDocSpec.scala { #selection-remote }

Java : @@snip ActorDocTest.java { #selection-remote }

An example demonstrating actor look-up is given in @ref:Remoting Sample.

Messages and immutability

@@@ warning { title=IMPORTANT }

Messages can be any kind of object but have to be immutable. @scala[Scala] @java[Akka] can’t enforce immutability (yet) so this has to be by convention. @scala[Primitives like String, Int, Boolean are always immutable. Apart from these the recommended approach is to use Scala case classes that are immutable (if you don’t explicitly expose the state) and works great with pattern matching at the receiver side.]

@@@

Here is an @scala[example:] @java[example of an immutable message:]

Scala : @@snip ActorDocSpec.scala { #immutable-message-definition #immutable-message-instantiation }

Java : @@snip ImmutableMessage.java { #immutable-message }

Send messages

Messages are sent to an Actor through one of the following methods.

@scala[@scaladoc!] @java[@javadoctell] means “fire-and-forget”, e.g. send a message asynchronously and return immediately. @scala[Also known as tell.]
@scala[?] @java[ask] sends a message asynchronously and returns a @scala[@scaladocFuture]@java[@javadocCompletionStage] representing a possible reply. @scala[Also known as ask.]

Message ordering is guaranteed on a per-sender basis.

@@@ note

There are performance implications of using ask since something needs to keep track of when it times out, there needs to be something that bridges a Promise into an @apidoc[akka.actor.ActorRef] and it also needs to be reachable through remoting. So always prefer tell for performance, and only ask if you must.

@@@

@@@ div { .group-java }

In all these methods you have the option of passing along your own @apidoc[akka.actor.ActorRef]. Make it a practice of doing so because it will allow the receiver actors to be able to respond to your message since the sender reference is sent along with the message.

@@@

Tell: Fire-forget

This is the preferred way of sending messages. No blocking waiting for a message. This gives the best concurrency and scalability characteristics.

Scala : @@snip ActorDocSpec.scala { #tell }

Java : @@snip ActorDocTest.java { #tell }

@@@ div { .group-scala }

If invoked from within an Actor, then the sending actor reference will be implicitly passed along with the message and available to the receiving Actor in its sender(): ActorRef member method. The target actor can use this to reply to the original sender, by using sender() ! replyMsg.

If invoked from an instance that is not an Actor the sender will be @scaladocdeadLetters actor reference by default.

@@@

@@@ div { .group-java }

The sender reference is passed along with the message and available within the receiving actor via its @javadocgetSender() method while processing this message. Inside of an actor it is usually @javadocgetSelf() who shall be the sender, but there can be cases where replies shall be routed to some other actor—e.g. the parent—in which the second argument to @javadoctell would be a different one. Outside of an actor and if no reply is needed the second argument can be null; if a reply is needed outside of an actor you can use the ask-pattern described next.

@@@

Ask: Send-And-Receive-Future

The ask pattern involves actors as well as futures, hence it is offered as a use pattern rather than a method on @apidoc[akka.actor.ActorRef]:

Scala : @@snip ActorDocSpec.scala { #ask-pipeTo }

Java : @@snip ActorDocTest.java { #import-ask #ask-pipe }

This example demonstrates ask together with the @scala[@scaladocpipeTo]@java[@javadocpipeTo] pattern on futures, because this is likely to be a common combination. Please note that all of the above is completely non-blocking and asynchronous: ask produces a @scala[@scaladocFuture]@java[@javadocCompletionStage], @scala[three] @java[two] of which are composed into a new future using the @scala[for-comprehension and then pipeTo installs an onComplete-handler on the Future to affect] @java[@javadocCompletableFuture.allOf and @javadocthenApply methods and then pipe installs a handler on the CompletionStage to effect] the submission of the aggregated Result to another actor.

Using ask will send a message to the receiving Actor as with tell, and the receiving actor must reply with @scala[sender() ! reply] @java[getSender().tell(reply, getSelf()) ] in order to complete the returned @scala[Future]@java[CompletionStage] with a value. The ask operation involves creating an internal actor for handling this reply, which needs to have a timeout after which it is destroyed in order not to leak resources; see more below.

@@@ warning

To complete the @scala[@scaladocFuture]@java[@javadocCompletionStage] with an exception you need to send an @apidoc[akka.actor.Status.Failure] message to the sender. This is not done automatically when an actor throws an exception while processing a message.

@scala[Please note that Scala's Try sub types @scaladocscala.util.Failure and @scaladocscala.util.Success are not treated especially, and would complete the ask @scala[Future]@java[CompletionStage] with the given value - only the @scaladocakka.actor.Status messages are treated specially by the ask pattern.]

@@@

Scala : @@snip ActorDocSpec.scala { #reply-exception }

Java : @@snip ActorDocTest.java { #reply-exception }

If the actor does not complete the @scala[@scaladocFuture]@java[@javadocCompletionStage], it will expire after the timeout period, @scala[completing it with an @scaladocAskTimeoutException. The timeout is taken from one of the following locations in order of precedence:] @java[specified as parameter to the ask method; this will complete the CompletionStage with an @javadocAskTimeoutException.]

@@@ div { .group-scala }

explicitly given timeout as in:

@@snip ActorDocSpec.scala { #using-explicit-timeout }
implicit argument of type akka.util.Timeout, e.g.

@@snip ActorDocSpec.scala { #using-implicit-timeout }

@@@

The @scala[@scaladoconComplete method of the Future]@java[@javadocthenRun method of the CompletionStage] can be used to register a callback to get a notification when the @scala[Future]@java[CompletionStage] completes, giving you a way to avoid blocking.

@@@ warning

When using future callbacks, @scala[such as @scaladoconComplete, or @scaladocmap]@scala[such as @javadocthenRun, or @javadocthenApply] inside actors you need to carefully avoid closing over the containing actor’s reference, i.e. do not call methods or access mutable state on the enclosing actor from within the callback. This would break the actor encapsulation and may introduce synchronization bugs and race conditions because the callback will be scheduled concurrently to the enclosing actor. Unfortunately, there is not yet a way to detect these illegal accesses at compile time. See also: @ref:Actors and shared mutable state

@@@

Forward message

You can forward a message from one actor to another. This means that the original sender address/reference is maintained even though the message is going through a 'mediator'. This can be useful when writing actors that work as routers, load-balancers, replicators etc.

Scala : @@snip ActorDocSpec.scala { #forward }

Java : @@snip ActorDocTest.java { #forward }

Receive messages

An Actor has to @scala[implement the @scaladocreceive method to receive messages:] @java[define its initial receive behavior by implementing the @javadoccreateReceive method in the AbstractActor:]

Scala : @@snip Actor.scala { #receive }

Java : @@snip ActorDocTest.java { #createReceive }

@@@ div { .group-scala }

This method returns a PartialFunction, e.g. a ‘match/case’ clause in which the message can be matched against the different case clauses using Scala pattern matching. Here is an example:

@@@

@@@ div { .group-java }

The return type is @javadocAbstractActor.Receive that defines which messages your Actor can handle, along with the implementation of how the messages should be processed. You can build such behavior with a builder named @javadocreceiveBuilder. Here is an example:

@@@

Scala : @@snip ActorDocSpec.scala { #imports1 #my-actor }

Java : @@snip MyActor.java { #imports #my-actor }

@@@ div { .group-java }

In case you want to provide many match cases but want to avoid creating a long call trail, you can split the creation of the builder into multiple statements as in the example:

@@snip GraduallyBuiltActor.java { #imports #actor }

Using small methods is a good practice, also in actors. It's recommended to delegate the actual work of the message processing to methods instead of defining a huge ReceiveBuilder with lots of code in each lambda. A well-structured actor can look like this:

@@snip ActorDocTest.java { #well-structured }

That has benefits such as:

easier to see what kind of messages the actor can handle
readable stack traces in case of exceptions
works better with performance profiling tools
Java HotSpot has a better opportunity for making optimizations

The @javadocReceive can be implemented in other ways than using the ReceiveBuilder since in the end, it is just a wrapper around a Scala PartialFunction. In Java, you can implement PartialFunction by extending AbstractPartialFunction.

If the validation of the ReceiveBuilder match logic turns out to be a bottleneck for some of your actors you can consider implementing it at a lower level by extending @javadocUntypedAbstractActor instead of @javadocAbstractActor. The partial functions created by the ReceiveBuilder consist of multiple lambda expressions for every match statement, where each lambda is referencing the code to be run. This is something that the JVM can have problems optimizing and the resulting code might not be as performant as the untyped version. When extending UntypedAbstractActor each message is received as an untyped Object and you have to inspect and cast it to the actual message type in other ways, like this:

@@snip ActorDocTest.java { #optimized }

@@@

Reply to messages

If you want to have a handle for replying to a message, you can use @scala[@scaladocsender] @java[@javadocgetSender()], which gives you an ActorRef. You can reply by sending to that ActorRef with @scala[sender() ! replyMsg.] @java[getSender().tell(replyMsg, getSelf()).] You can also store the ActorRef for replying later, or passing it on to other actors. If there is no sender (a message was sent without an actor or future context) then the sender defaults to a 'dead-letter' actor ref.

Scala : @@snip ActorDocSpec.scala { #reply-without-sender }

Java : @@snip MyActor.java { #reply }

Receive timeout

The @java[@scaladocActorContext.setReceiveTimeout]@java[@javadocActorContext.setReceiveTimeout] defines the inactivity timeout after which the sending of a @apidoc[akka.actor.ReceiveTimeout] message is triggered. When specified, the receive function should be able to handle an akka.actor.ReceiveTimeout message. 1 millisecond is the minimum supported timeout.

Please note that the receive timeout might fire and enqueue the ReceiveTimeout message right after another message was enqueued; hence it is not guaranteed that upon reception of the receive timeout there must have been an idle period beforehand as configured via this method.

Once set, the receive timeout stays in effect (i.e. continues firing repeatedly after inactivity periods).

To cancel the sending of receive timeout notifications, use cancelReceiveTimeout.

Scala : @@snip ActorDocSpec.scala { #receive-timeout }

Java : @@snip ActorDocTest.java { #receive-timeout }

Messages marked with @apidoc[NotInfluenceReceiveTimeout] will not reset the timer. This can be useful when @apidoc[akka.actor.ReceiveTimeout] should be fired by external inactivity but not influenced by internal activity, e.g. scheduled tick messages.

Timers, scheduled messages

Messages can be scheduled to be sent at a later point by using the @ref:Scheduler directly, but when scheduling periodic or single messages in an actor to itself it's more convenient and safe to use the support for named timers. The lifecycle of scheduled messages can be difficult to manage when the actor is restarted and that is taken care of by the timers.

Scala : @@snip ActorDocSpec.scala { #timers }

Java : @@snip ActorDocTest.java { #timers }

The @ref:Scheduler documentation describes the difference between fixed-delay and fixed-rate scheduling. If you are uncertain of which one to use you should pick @apidocstartTimerWithFixedDelay {scala="#startTimerWithFixedDelay(key:Any,msg:Any,initialDelay:scala.concurrent.duration.FiniteDuration,delay:scala.concurrent.duration.FiniteDuration):Unit" java="#startTimerWithFixedDelay(java.lang.Object,java.lang.Object,java.time.Duration,java.time.Duration)"}.

Each timer has a key and can be replaced or cancelled. It's guaranteed that a message from the previous incarnation of the timer with the same key is not received, even though it might already be enqueued in the mailbox when it was cancelled or the new timer was started.

The timers are bound to the lifecycle of the actor that owns it and thus are cancelled automatically when it is restarted or stopped. Note that the @apidoc[akka.actor.TimerScheduler] is not thread-safe, i.e. it must only be used within the actor that owns it.

Stopping actors

Actors are stopped by invoking the stop method of a @apidoc[akka.actor.ActorRefFactory], i.e. @apidoc[akka.actor.ActorContext] or @apidoc[akka.actor.ActorSystem]. Typically the context is used for stopping the actor itself or child actors and the system for stopping top-level actors. The actual termination of the actor is performed asynchronously, i.e. stop may return before the actor is stopped.

Scala : @@snip ActorDocSpec.scala { #stoppingActors-actor }

Java : @@snip MyStoppingActor.java { #my-stopping-actor }

Processing of the current message, if any, will continue before the actor is stopped, but additional messages in the mailbox will not be processed. By default, these messages are sent to the @apidocdeadLetters {scala="#deadLetters:akka.actor.ActorRef" java="#deadLetters()"} of the ActorSystem, but that depends on the mailbox implementation.

Termination of an actor proceeds in two steps: first the actor suspends its mailbox processing and sends a stop command to all its children, then it keeps processing the internal termination notifications from its children until the last one is gone, finally terminating itself (invoking @scala[@scaladocpostStop]@java[@javadocpostStop], dumping mailbox, publishing @apidoc[akka.actor.Terminated] on the @ref:DeathWatch, telling its supervisor). This procedure ensures that actor system sub-trees terminate in an orderly fashion, propagating the stop command to the leaves and collecting their confirmation back to the stopped supervisor. If one of the actors do not respond (i.e. processing a message for extended periods of time and therefore not receiving the stop command), this whole process will be stuck.

Upon @apidocActorSystem.terminate() {scala="#terminate():scala.concurrent.Future[akka.actor.Terminated]" java="#terminate()"}, the system guardian actors will be stopped, and the aforementioned process will ensure proper termination of the whole system. See @ref:Coordinated Shutdown.

The postStop() hook is invoked after an actor is fully stopped. This enables cleaning up of resources:

Scala : @@snip ActorDocSpec.scala { #postStop }

Java : @@snip ActorDocTest.java { #postStop }

@@@ note

Since stopping an actor is asynchronous, you cannot immediately reuse the name of the child you just stopped; this will result in an @apidoc[akka.actor.InvalidActorNameException]. Instead, watch() the terminating actor and create its replacement in response to the @apidoc[akka.actor.Terminated] message which will eventually arrive.

@@@

PoisonPill

You can also send an actor the @apidoc[akka.actor.PoisonPill] message, which will stop the actor when the message is processed. PoisonPill is enqueued as ordinary messages and will be handled after messages that were already queued in the mailbox.

Scala : @@snip ActorDocSpec.scala { #poison-pill }

Java : @@snip ActorDocTest.java { #poison-pill }

Killing an Actor

You can also "kill" an actor by sending a @apidoc[akka.actor.Kill] message. Unlike PoisonPill this will cause the actor to throw a @apidoc[akka.actor.ActorKilledException], triggering a failure. The actor will suspend operation and its supervisor will be asked how to handle the failure, which may mean resuming the actor, restarting it or terminating it completely. See @ref:What Supervision Means for more information.

Use Kill like this:

Scala : @@snip ActorDocSpec.scala { #kill }

Java : @@snip ActorDocTest.java { #kill }

In general, it is not recommended to overly rely on either PoisonPill or Kill in designing your actor interactions, as often a protocol-level message like PleaseCleanupAndStop which the actor knows how to handle is encouraged. The messages are there for being able to stop actors over which design you do not have control over.

Graceful Stop

@scala[@scaladocgracefulStop]@java[@javadocgracefulStop] is useful if you need to wait for termination or compose ordered termination of several actors:

Scala : @@snip ActorDocSpec.scala { #gracefulStop}

Java : @@snip ActorDocTest.java { #import-gracefulStop #gracefulStop}

When gracefulStop() returns successfully, the actor’s @scala[@scaladocpostStop]@java[@javadocpostStop] hook will have been executed: there exists a happens-before edge between the end of postStop() and the return of gracefulStop().

In the above example, a custom Manager.Shutdown message is sent to the target actor to initiate the process of stopping the actor. You can use PoisonPill for this, but then you have limited possibilities to perform interactions with other actors before stopping the target actor. Simple cleanup tasks can be handled in postStop.

@@@ warning

Keep in mind that an actor stopping and its name being deregistered are separate events that happen asynchronously from each other. Therefore it may be that you will find the name still in use after gracefulStop() returned. To guarantee proper deregistration, only reuse names from within a supervisor you control and only in response to a @apidoc[akka.actor.Terminated] message, i.e. not for top-level actors.

@@@

Become/Unbecome

Upgrade

Akka supports hotswapping the Actor’s message loop (e.g. its implementation) at runtime: invoke the @apidoccontext.become {scala="#become(behavior:akka.actor.Actor.Receive,discardOld:Boolean):Unit" java="#become(scala.PartialFunction,boolean)"} method from within the Actor. become takes a @scala[PartialFunction[Any, Unit]] @java[PartialFunction<Object, BoxedUnit>] that implements the new message handler. The hotswapped code is kept in a Stack that can be pushed and popped.

@@@ warning

Please note that the actor will revert to its original behavior when restarted by its Supervisor.

@@@

To hotswap the Actor behavior using become:

Scala : @@snip ActorDocSpec.scala { #hot-swap-actor }

Java : @@snip ActorDocTest.java { #hot-swap-actor }

This variant of the become method is useful for many different things, such as to implement a Finite State Machine (FSM). It will replace the current behavior (i.e. the top of the behavior stack), which means that you do not use @apidocunbecome {scala="#unbecome():Unit" java="#unbecome()"}, instead always the next behavior is explicitly installed.

The other way of using become does not replace but add to the top of the behavior stack. In this case, care must be taken to ensure that the number of “pop” operations (i.e. unbecome) matches the number of “push” ones in the long run, otherwise this amounts to a memory leak (which is why this behavior is not the default).

Scala : @@snip ActorDocSpec.scala { #swapper }

Java : @@snip ActorDocTest.java { #swapper }

Encoding Scala Actors nested receives without accidentally leaking memory

See this @extrefUnnested receive example.

Stash

The @scala[@scaladocStash trait] @java[@javadocAbstractActorWithStash class] enables an actor to temporarily stash away messages that can not or should not be handled using the actor's current behavior. Upon changing the actor's message handler, i.e., right before invoking @scala[context.become or context.unbecome] @java[getContext().become() or getContext().unbecome()], all stashed messages can be "unstashed", thereby prepending them to the actor's mailbox. This way, the stashed messages can be processed in the same order as they have been received originally. @java[An actor that extends AbstractActorWithStash will automatically get a deque-based mailbox.]

@@@ note { .group-scala }

The trait Stash extends the marker trait @scaladocRequiresMessageQueue[@scaladocDequeBasedMessageQueueSemantics] which requests the system to automatically choose a deque based mailbox implementation for the actor. If you want more control over the mailbox, see the documentation on mailboxes: @ref:Mailboxes.

@@@

@@@ note { .group-java }

The abstract class @javadocAbstractActorWithStash implements the marker interface @javadocRequiresMessageQueue<@javadocDequeBasedMessageQueueSemantics> which requests the system to automatically choose a deque based mailbox implementation for the actor. If you want more control over the mailbox, see the documentation on mailboxes: @ref:Mailboxes.

@@@

Here is an example of the @scala[@scaladocStash trait] @java[@javadocAbstractActorWithStash class] in action:

Scala : @@snip ActorDocSpec.scala { #stash }

Java : @@snip ActorDocTest.java { #stash }

Invoking stash() adds the current message (the message that the actor received last) to the actor's stash. It is typically invoked when handling the default case in the actor's message handler to stash messages that aren't handled by the other cases. It is illegal to stash the same message twice; to do so results in an @javadocIllegalStateException being thrown. The stash may also be bounded in which case invoking stash() may lead to a capacity violation, which results in a @apidoc[akka.actor.StashOverflowException]. The capacity of the stash can be configured using the stash-capacity setting (an Int) of the mailbox's configuration.

Invoking unstashAll() enqueues messages from the stash to the actor's mailbox until the capacity of the mailbox (if any) has been reached (note that messages from the stash are prepended to the mailbox). In case a bounded mailbox overflows, a MessageQueueAppendFailedException is thrown. The stash is guaranteed to be empty after calling unstashAll().

The stash is backed by a @scaladocscala.collection.immutable.Vector. As a result, even a very large number of messages may be stashed without a major impact on performance.

@@@ warning { .group-scala }

Note that the @scaladocStash trait must be mixed into (a subclass of) the @scaladocActor trait before any trait/class that overrides the @scaladocpreRestart] callback. This means it's not possible to write Actor with MyActor with Stash if MyActor overrides preRestart.

@@@

Note that the stash is part of the ephemeral actor state, unlike the mailbox. Therefore, it should be managed like other parts of the actor's state which have the same property.

However, the @scala[@scaladocStash trait] @java[@javadocAbstractActorWithStash class] implementation of preRestart will call unstashAll(). This means that before the actor restarts, it will transfer all stashed messages back to the actor's mailbox.

The result of this is that when an actor is restarted, any stashed messages will be delivered to the new incarnation of the actor. This is usually the desired behavior.

@@@ note

If you want to enforce that your actor can only work with an unbounded stash, then you should use the @scala[@scaladocUnboundedStash trait] @java[@javadocAbstractActorWithUnboundedStash class] instead.

@@@

@@@ div { .group-scala }

Extending Actors using PartialFunction chaining

Sometimes it can be useful to share common behavior among a few actors, or compose one actor's behavior from multiple smaller functions. This is possible because an actor's @scala[@scaladocreceive]@java[@javadoccreateReceive] method returns an Actor.Receive, which is a type alias for PartialFunction[Any,Unit], and partial functions can be chained together using the PartialFunction#orElse method. You can chain as many functions as you need, however you should keep in mind that "first match" wins - which may be important when combining functions that both can handle the same type of message.

For example, imagine you have a set of actors which are either Producers or Consumers, yet sometimes it makes sense to have an actor share both behaviors. This can be achieved without having to duplicate code by extracting the behaviors to traits and implementing the actor's receive as a combination of these partial functions.

@@snip ActorDocSpec.scala { #receive-orElse }

Instead of inheritance the same pattern can be applied via composition - compose the receive method using partial functions from delegates.

@@@

Initialization patterns

The rich lifecycle hooks of Actors provide a useful toolkit to implement various initialization patterns. During the lifetime of an @apidoc[akka.actor.ActorRef], an actor can potentially go through several restarts, where the old instance is replaced by a fresh one, invisibly to the outside observer who only sees the ActorRef.

Initialization might be necessary every time an actor is instantiated, but sometimes one needs initialization to happen only at the birth of the first instance when the ActorRef is created. The following sections provide patterns for different initialization needs.

Initialization via constructor

Using the constructor for initialization has various benefits. First of all, it makes it possible to use val fields to store any state that does not change during the life of the actor instance, making the implementation of the actor more robust. The constructor is invoked when an actor instance is created calling actorOf and also on restart, therefore the internals of the actor can always assume that proper initialization happened. This is also the drawback of this approach, as there are cases when one would like to avoid reinitializing internals on restart. For example, it is often useful to preserve child actors across restarts. The following section provides a pattern for this case.

Initialization via preStart

The method @scala[@scaladocpreStart]@java[@javadocpreStart] of an actor is only called once directly during the initialization of the first instance, that is, at the creation of its ActorRef. In the case of restarts, preStart() is called from @scala[@scaladocpostRestart]@java[@javadocpostRestart], therefore if not overridden, preStart() is called on every restart. However, by overriding postRestart() one can disable this behavior, and ensure that there is only one call to preStart().

One useful usage of this pattern is to disable creation of new ActorRefs for children during restarts. This can be achieved by overriding @scala[@scaladocpreRestart]@java[@javadocpreRestart]. Below is the default implementation of these lifecycle hooks:

Scala : @@snip InitializationDocSpec.scala { #preStartInit }

Java : @@snip InitializationDocTest.java { #preStartInit }

Please note, that the child actors are still restarted, but no new @apidoc[akka.actor.ActorRef] is created. One can recursively apply the same principles for the children, ensuring that their preStart() method is called only at the creation of their refs.

For more information see @ref:What Restarting Means.

Initialization via message passing

There are cases when it is impossible to pass all the information needed for actor initialization in the constructor, for example in the presence of circular dependencies. In this case, the actor should listen for an initialization message, and use @apidocbecome() {scala="#become(behavior:akka.actor.Actor.Receive,discardOld:Boolean):Unit" java="#become(scala.PartialFunction,boolean)"} or a finite state-machine state transition to encode the initialized and uninitialized states of the actor.

Scala : @@snip InitializationDocSpec.scala { #messageInit }

Java : @@snip InitializationDocTest.java { #messageInit }

If the actor may receive messages before it has been initialized, a useful tool can be the Stash to save messages until the initialization finishes, and replaying them after the actor became initialized.

@@@ warning

This pattern should be used with care, and applied only when none of the patterns above are applicable. One of the potential issues is that messages might be lost when sent to remote actors. Also, publishing an @apidoc[akka.actor.ActorRef] in an uninitialized state might lead to the condition that it receives a user message before the initialization has been done.

@@@